Jump to content
SAU Community

Recommended Posts

Item 1.

Genuine Rays Volk TE37 in White, 5 x 114.3

- 18 x 8,5 +30 fronts are in good condition

- 19 x 9.5 +35 rears are faded and 2 small dings in one of them, no cracks

- $1800ono

Item 2.

Genuine Exedy Clutch

- Genuine Exedy OE Replacement (Full Faced Organic) Clutch / Drive Plate (NSD098U)

- Unknown Cover!! I am told its off an R33, photo on Exedy wedsite matches RB25 diff cover

- Clearly you can see it has had minimal use

- $400!!!

This plate is found within the following Exedy clutch kits:

  • Exedy NSK-6531
  • Exedy NSK-6531HD
  • Exedy NSK-7056
  • Exedy NSK-7056HD
  • Exedy NSK-7297
  • Exedy NSK-7297HD
  • Exedy NSK-7377(SMF)

This Listing Suits The Following Application(s):

  • Nissan 180SX RPS13 (SR20DET, 01/1991 - 12/1998)
  • Nissan 200SX S14 ADM (SR20DET, 10/1994 - 03/2000)
  • Nissan 200SX S15 ADM (SR20DET, 01/2000 - 01/2002)
  • Nissan 300ZX Z31 200ZR (RB20DET, 10/1985 - 06/1989)
  • Nissan Cefiro LNA31 Attesa Cruising (4WD) (RB20DET, 08/1990 - 08/1994)
  • Nissan Cefiro R©A31 (RB20DET, 09/1988 - 08/1994)
  • Nissan Laurel R©C33 (RB20DET, 04/1989 - 01/1993)
  • Nissan Pulsar RNN14 GTI-R (SR20DET, 08/1990 - 01/1995)
  • Nissan Skyline HR31 JDM (RB20DET, 08/1985 - 05/1989)
  • Nissan Skyline HNR32 GTS-4 (RB20DET, 08/1989 - 08/1993)
  • Nissan Skyline H©R32 GTS-T (RB20DET, 05/1989 - 08/1993)
  • Nissan Skyline E©R33 GTS25-T (Series 2) (RB25DET, 01/1995 - 05/1998)
  • Nissan Skyline E©R33 GTS25-T (Series 1) (RB25DET, 08/1993 - 01/1995)

Item 3.

OMP Race Seat

- FIA Stamped

- Purchased from Revolution Racegear

- Comes with Revolution Racegear side mount brackets

- $400

Item 4.

Bride Drivers Seat Rail

- Super Low, Suits S13, S14, S15

- N045SL

- $80 (or $50 if purchased with seat)

Item 5.

Just Jap Seat and Passenger Rails

- Made for comfort

- Custom made passenger seat rails

- $150ono

Item 6.

HKS EVC 3 Boost Controller

- As Pictured

- $200

- All items are in Clayton, Victoria 3168

- I am willing to post, please PM me

- Discounts for buying multiple items

- Make an offer

- 0421 489 894

post-41004-0-23335600-1371453066_thumb.jpg

post-41004-0-73565400-1371453296_thumb.jpg

post-41004-0-75778900-1371453421_thumb.jpg

post-41004-0-06586100-1371453442_thumb.jpg

post-41004-0-84981400-1371453480_thumb.jpg

post-41004-0-91869600-1371453745_thumb.jpg

post-41004-0-82128500-1371453758_thumb.jpg

post-41004-0-92446800-1371453769_thumb.jpg

post-41004-0-61158400-1371453783_thumb.jpg

post-41004-0-76813700-1371453824_thumb.jpg

post-41004-0-43844200-1371453840_thumb.jpg

post-41004-0-07980500-1371453851_thumb.jpg

post-41004-0-16559400-1371458836_thumb.jpg

post-41004-0-42171700-1371458850_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Dose is unaware just how much fun 145-150kw would be in a 2.5L NC MX5. It would be one of the most fun things to drive to ever grace SAU.
    • Same thought crossed my mind ~ depends on how one connotes 'stalling'...ie; gets a rough/stumbling idle as it get warm until it stalls... or... idles ok and simply falls-over when it gets to temp... ...you can test the whole circuit with a couple of resistors ...unplug coolant temp sensor, bridge terminals with a 2K7 resistor (ECU will do cold start), or with engine warm bridge with a 330R resistor (ECU will consider engine to be at normal operating temp)...it's a quick way to check wiring integrity/ECU response when you don't have a multimeter handy ...
    • They also make them with the motor mounted on the side 
    • Just be warned that that turbo will not be a direct re-fit to the car. The exhaust housing is, of course, in the same place. It has to be - it's bolted to the exhaust manifold. So the dump will fit up. But the centre housing is not as long, so the comp housing will move backwards. This will affect both the turbo inlet and the outlet. There is fab work that needs to be done. Yes. it has one, it should have one. Paper gasket.
    • I only recently purchased the vehicle, it came with the flex setup but the current tune is e85 only, which is why im wanting to get the tune redone to enable a mixture.  First i need to get the exhaust redone tho. I was thinking of getting a varex muffler but it sems they dont fit well in the 33 (hang low because of the valve mechanism which sticks out on top) and generally dont sound good. So that leaves me with redoing the entire exhaust (more resonators and mufflers) so its not a menace when i come and go from home, and then have the aes dump valve somewhere along the line to really open it up. I was thinking of having it before the cat but after seeing how insanely loud it will be (on a vl turbo) im thinking of putting it more towards the rear of the car, after one of the resonators. 
×
×
  • Create New...