Jump to content
SAU Community

Recommended Posts

Hi Guys,

Was hoping someone could clarify what would be an appropriate tyre choice for 19x10.5 +15 wheels on an R34 GTR?

I was thinking 285/30/19 would fit best without rubbing (correct me if I am wrong), but my preferred tyre choice (Yoko AD08) don't come in this size.

Could anyone recommend another similar high quality brand and model?

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/427199-tyre-choice-for-19x105-15/
Share on other sites

i had the same dramas deciding tyres on my 19s.. i went with nitto NT05 275/30s.. i had on before that 275/35 and they rubbed.. i believe 285 30 would probably still rub, but i could be wrong there, as the rolling dia is to large i believe...

i now have 18s and run 295 30 with no issues.

So according to the willtheyfit.com calculator, it shows that a 285/30 tyre would be closer to the correct rolling diameter?

Was thinking S-04 Potenza's if 285/30 was the go

Yea your right, but i was more talking about a too larger rolling dia for scrubbing with a wide tyre etc...

i had to sacrifice a little rolling dia to fit 295s, worth it imo..

not sure if anyone has tried 285/30 on 19s?.. if they fit that would obviously be the pick.

I had 30 profile because I knew that a 35 profile had changed the overall rolling diameter especially for 285/295's. Mine are pirelli p-zero corsa asimmetrico 275/30/19



For eg a 285/35/19 for 10.5 wide rim is 682.1mm whereas mine now is 647.6mm.



This is because I didn't want to roll my guards or cut anything inside my guard either and the fact that I want to at least manage 90% of a full lock with no rub too.



285/30/19 might be borderline in terms of fitment. Even with my size and profile, when I lowered my car (very low) it became much more difficult to be "friendly" driving it.



Since then, I'm going to raise it a bit and fit a nice big brake kit soon :)


Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have always resisted the urge to go silly. 8" wide wheels and street friendly spring rates? Check. (Let's not talk about the steadily increasing spread of spherical joints across my suspension!!) Stock turbo, run at 12 psi? Check. Lasted for ?10 years before it died. Highflow put on rather than seizing the opportunity to go G45. You don't need 300 rwkW, let alone the more massive numbers that seem to be essential these days, to have a car that is already way too powerful and fast for a streeter. ~250rwkW is fine. I've never exceeded 200, although I will sneak up above it if and when I manage to get my finger out and do what needs to be done to use the highflow's capacity. You don't need $10k worth of CF bits glued onto the outside. You don't need razor sharp ankle cutting front splitters. You don't need the car to be 2" off the ground. You don't need flawless paint, mirror finished wheels, brand new indicator lenses, etc etc. All these things just make the car impractical and will cause you pain when they get damaged, which is inevitable for a street car. A few nice additions are good. Good seats are good. A nice stereo is good. A/C is good! (46° on the road yesterday and my A/C is degassed again. Was moderately traumatic driving home!) The main reason I stick with a mildly modified old Skyline is that I have had it for  >25 years, the mods are the rolling result of 25 years of things dying and being upgraded opportunistically, coupled with a few "just 'coz" ones. And I hate modern almost all cars. If I was a young buck starting out now.... I wouldn't bother. Cars have a few years left where there is any possibility of interest or fun. Thereafter there will be no such thing allowed or possible. Any time, money and effort spent now on a project would just be a waste.
    • Let's be wary though, if cranking is so far off, what else isn't set right? Are the dead times set right, voltage compensation etc?   It definitely sounds like it's cranking fuel issues, and holding flat to the floor is shutting them down, but I'm with Duncan that if nothing was changed in the ECU at all, and then this started, I'd be more thinking a leaking injector.   Do as Duncan said, drop the oil and make sure it's not full of fuel.
    • It actually means give it less throttle.
    • Yeah if the goal is to drive something then modifying a car is a bad idea.
    • Wowee! She looks like a major handful out there Pete!
×
×
  • Create New...