Jump to content
SAU Community

Recommended Posts

Guest Robo's

Well finally did it at Calder tonight with my stock turboed R33 GTST running street tyred Sumituno's HRZ'2's with a 12.98@107.2 with a 2.02 60 foot. I was completely wrapped.

First run saw a PB of 13.12@106.7 with a 2.09 60'foot. Next run was surely a 12 second run with a 1.97 60' foot but missed 3rd gear and coasted to a 13.6. Then the final run of the night saw the above result 12.98@107.2mph.

All this result with the standard turbo running 13psi, still using the trusty SAFC, FMIC, Full 3 inch exhaust, Boxed up Pod, and cam gears.

Got to be happy with that :rofl:

Link to comment
https://www.sau.com.au/forums/topic/42767-r33-into-the-12s/
Share on other sites

  • Replies 123
  • Created
  • Last Reply

Top Posters In This Topic

Well finally did it at Calder tonight with my stock turboed R33 GTST running street tyred Sumituno's HRZ'2's with a 12.98@107.2 with a 2.02 60 foot.  I was completely wrapped.

First run saw a PB of 13.12@106.7 with a 2.09 60'foot.  Next run was surely a 12 second run with a 1.97 60' foot but missed 3rd gear and coasted to a 13.6.  Then the final run of the night saw the above result 12.98@107.2mph.

All this result with the standard turbo running 13psi, still using the trusty SAFC, FMIC, Full 3 inch exhaust, Boxed up Pod, and cam gears.

Got to be happy with that :rofl:

Good Job! Best I could get out of my stock turboed RB25 was a 13.8 @ 104 with a 2.1 60ft. Of course my RB25 is in an S13 body so I should be a little quicker. I am running stock IC, stock ECU with no fuel correction and 3" exhaust. Looks like cam gears and SAFC should be on my list of future mods.

Link to comment
https://www.sau.com.au/forums/topic/42767-r33-into-the-12s/#findComment-873475
Share on other sites

great effort robbo it means a 12 is not far away for me either had a similar mph with less power than now.

calder seem to have made the surface much better for launching heard of some great times last night dr-drifts ca datto 1600 ran 12.003 @ 113 mph on street tyres and he did a 1.7 60'. also a gtr did 11.6 @ 120 mph.

meggala

Link to comment
https://www.sau.com.au/forums/topic/42767-r33-into-the-12s/#findComment-873518
Share on other sites

Awesome! Congratulations, thats very impressive without heaps of mods. In NZ the quickest R33s are barely touching into the 13s :rofl:

I'm just a n00b here, but I have been quietly tracking your progress and soaking info, because I have been building up parts for my R33 - and your car for a while had very similar to the mods I decided to do for my "first stage" (cold air intake, cat back exhaust, and S-AFC2) and read quite a few posts re: your car and S-AFC tuning which looked very positive for the direction I was heading.

What clutch are you running?

Link to comment
https://www.sau.com.au/forums/topic/42767-r33-into-the-12s/#findComment-873545
Share on other sites

Guest Robo's
Awesome!  Congratulations, thats very impressive without heaps of mods.  In NZ the quickest R33s are barely touching into the 13s :rofl:

I'm just a n00b here, but I have been quietly tracking your progress and soaking info, because I have been building up parts for my R33 - and your car for a while had very similar to the mods I decided to do for my "first stage" (cold air intake, cat back exhaust, and S-AFC2) and read quite a few posts re: your car and S-AFC tuning which looked very positive for the direction I was heading.    

What clutch are you running?

Running the Extreme Daikin Heavy duty. Its been in for nearly a year now with about 20 runs down the strip and not one problem. Not bad for $400.

Link to comment
https://www.sau.com.au/forums/topic/42767-r33-into-the-12s/#findComment-873593
Share on other sites

Good to see another std turbo r33 into the 12's, still not sure where im gonna find a full 1sec but it'll be fun (and expensive) trying :rofl:

R33vit ran a 12.9sec on the std turbo with a "road tuned" P/Fc which is extremly impressive too.

Link to comment
https://www.sau.com.au/forums/topic/42767-r33-into-the-12s/#findComment-873716
Share on other sites

Running the Extreme Daikin Heavy duty.  Its been in for nearly a year now with about 20 runs down the strip and not one problem.  Not bad for $400.

No, not at all - I haven't had any problems with mine at all... but so far I have only been running around on stock boost, untuned SAFC and a catback exhaust - so no real stress for it YET :P I run 255s on the back so I am a bit worried that after the car is tuned with a bit more boost - it might get a bit more upset.

Anyway, keep up the good times guys! I'll watch with interest how you guys are going and see if I can get an R33 representing a little in NZ as well :rofl:

Link to comment
https://www.sau.com.au/forums/topic/42767-r33-into-the-12s/#findComment-873744
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Good to hear. Hopefully you're happy enough not to notice when driving and just enjoy yourself.
    • I mean, most of us just love cars. Doesnt necessarily have to be a skyline.
    • Did you pick up a manual cluster to remove the position indicator?  (Pretty sure the 34 has the gear position in the cluster, but it's been a while)
    • Here is a recipe. Sonic blocks till you get one that has a good enough bore. Get a torque plate and block brace, use your choice of fasteners (arp ect) bolt the thing together empty, half fill it and let it cure. Release it when it has, go to a REPUTABLE RB Builder and get the thing line bored/honed and cylinder honed to size, then wash. Once its all clean and dandy, wash and blow it out again. Then again.  Assemble said engine to your desired clearances with oil control mods, gasket to suit desired CR/Squish ect. Attach your extended sump with proper trap door oil baffles and head drain plumbed to sump with a SUMP BREATHER SYSTEM. Build your front diff with a decent LSD, rebuild your transfer case with a few extra plates, more than likely replace your tailshaft centre bearing and tighten up the rear diff. Tune to minimise excessive midrange cylinder pressure (timing unless you like to split bores and rebuild engines) Enjoy your engine, but hate the fact you are now destroying engine mounts, gearboxes, gearbox mounts, diff output flanges and driveshafts, diff mounts, tailshafts and front CV's.   Disclaimer.... Ive never done any of the aforementioned stuff.......
    • 440s will support well over 400HP on petrol, which is a decent place to be for an RB20. 230+rwkW. Will be a safer bet for idle/low load. 550s would be nice for the extra headroom. I've made the same decision with mine (Neo25). 1000s are probably too big for the Nistuned ECU, so I have some smaller ones.
×
×
  • Create New...