Jump to content
SAU Community

Idicators Not Working [R34 Gtt]

Eps

By Eps,
in General Maintenance

 Share

Recommended Posts

Eps Enthusiast

Eps

Posted
Posted

R34 GTT 1998

My indicators have just stopped working as I got to work today. Hazzard lights dont work either. However my alarm works just fine and unlocking/locking the car with the alarm lights them up.

Depressing the hazzard lights button I hear the relay click once under the steering wheel.

When the alarm ticks the indicators, it seems that it is slightly faster than usual... not a broken indicator though - Maybe it bypasses the relay? - i dont know...

I can't find the fuse for the indicators, but the fact the alarm runs them fine makes me think this is not an issue, unless the alarm bypasses the fuse and relay.

Any tips?

Thanks

Link to comment
https://www.sau.com.au/forums/topic/427685-idicators-not-working-r34-gtt/
Share on other sites
Eps Enthusiast

Eps

Posted
  • Author
Posted

I just removed the NILES IF332 OEM flasher relay and when I opened it it had burn spots on the plastic. It looks like a piece of metal broke off and shorted...

I placed a Tridon EP35 in to replace but it made no difference yet.

The relay still works though. I will check fuses as that seems likely.

Eps Enthusiast

Eps

Posted
  • Author
Posted

Fuses are all good. Funnily enough, I armed the alarm, hit the hazzard button and the indicators came on and went off and now cease to function when the alarm is armed... but all fuses are still okay... wtf???!! Someone somewhere said something about an indicator controller... where/what is it?

darksky34 Mentor

darksky34

Posted
Posted

hey mate sorry to sidetrack you but do you mind telling me where to get to the flasher relays? pic of the location would be great if possible.

I want to put in some LEDs for my rear indicators and i know that without a relay they will flash really fast - so i bought a relay switch thingy which will increase resistance, it's a plug type thing so no soldering necessary. any help would be much appreciated, sounds like you know where things go!

Eps Enthusiast

Eps

Posted
  • Author
Posted

Pop your head up under the drivers footwell and you shouldn't see a whole lot... grab a light and look for a black relay on the door side of the steering column. To help you can flick on your indicators and you will hear and feel it clicking. Unplug it to confirm that its the correct one. :-)

Eps Enthusiast

Eps

Posted
  • Author
Posted

Thanks mad. I did replace the head unit a few months ago. Could be likely.

I figured it could be a loose connection but the fact it still controls the relay made me look past it. Ill check on the weekend :-).

Has anyone got a wiring diagram inclusive of indicators? Ive seen a few but not one that details indicators.

  • 3 weeks later...
Eps Enthusiast

Eps

Posted
  • Author
Posted

Today I had another detailed look under the dash. I found a small fuse box going to the alarm with 2 fuses. a 5 amp fuse was blown. Replaced it with another 5 amp. It blew when alarm lit the indicators for 1/2 a second. Put in a 10 amp fuse now and the indicators work with the alarm!

The indicators still do not work with the stalk or hazard switch. I pulled out the hazard switch and connected it without the air vents. It makes a singular tick on the relay when depressed so it seems it still works. Still no indicators.

I removed the black box mounted in front of the flasher relay and check inside. All seemed okay. Just a smaller black box. No burns or smells.

What is in the brown relay thing?

I'm starting to think maybe the alarm is causing the issue...

:domokun::domokun::domokun::domokun:

Eps Enthusiast

Eps

Posted
  • Author
Posted

Tested the new replacement relay. It does not work.

Tested old relay. working but low voltage. Cleaned connectors and bent copper to make better contact.

Working.

TLDR; Relay was partially faulty, so was new relay.

I can drive my car again! After putting back together the entire dash hahaha! I'm just happy I know what it is now.

  • 2 years later...
xanavinismo Rising Star

xanavinismo

Posted
Posted

I have pretty much exactly the same problem with my R34 GTR! Indicators and hazards do not work (no lights, no sound from flasher unit) but DOES work when I arm/dissarm my alarm system... hazard light is fully plugged in, fuse for indicators & hazard lights are fine.

I recently cut off some wires that go to the standard Japanese Sat Nav (as it is was unplugged) but after looking at it closer I noticed that the the hazard lights has 8 wires:

  • 3 to main wiring loom
  • 3 to a Sat Nav connector
  • 2 to the head deck wiring

So im wondering why would there would be connections from hazards to sat nav/head deck??

Cheers for any info/help guys!

Eps Enthusiast

Eps

Posted
  • Author
Posted (edited)

I have pretty much exactly the same problem with my R34 GTR! Indicators and hazards do not work (no lights, no sound from flasher unit) but DOES work when I arm/dissarm my alarm system... hazard light is fully plugged in, fuse for indicators & hazard lights are fine.

I recently cut off some wires that go to the standard Japanese Sat Nav (as it is was unplugged) but after looking at it closer I noticed that the the hazard lights has 8 wires:

  • 3 to main wiring loom
  • 3 to a Sat Nav connector
  • 2 to the head deck wiring

So im wondering why would there would be connections from hazards to sat nav/head deck??

Cheers for any info/help guys!

This was in my GTT. I haven't checked out the wires going into the MFD (if that's what you're referring to) on my GTR.

Who knows. But if you cut it and then it doesn't work.......

This ^ If it stopped working exactly as you did this, check the pin out diagrams.

MFD Info: http://www.sau.com.au/forums/index.php?app=core&module=attach&section=attach&attach_id=166053 (from here: )

My alarm basically bypassed the standard relay and fuses for indicators. So that can mislead you.

Maybe check related fuses and then get a relay tester or another relay to test with.

Edited by Eps
xanavinismo Rising Star

xanavinismo

Posted
Posted

But this is what trips me out...

  1. My Sat Nav & Head Unit were both already unplugged (so essentially the wires and pins arent touching or connected to anything right??)
  2. Why would there be wires going from Hazard lights to Sat Nav & Head Unit connections? Shouldnt they just go straight to the wiring loom?

Oh and Eps - No wires are MFD related.

Cheers,

Eps Enthusiast

Eps

Posted
  • Author
Posted

But this is what trips me out...

  1. My Sat Nav & Head Unit were both already unplugged (so essentially the wires and pins arent touching or connected to anything right??)
  2. Why would there be wires going from Hazard lights to Sat Nav & Head Unit connections? Shouldnt they just go straight to the wiring loom?

Oh and Eps - No wires are MFD related.

Cheers,

Ah gotcha. Sorry, don't know anything about the Sat Nav units you describe. Didn't know they existed!

Check fuses in case one blew when you cut the wires. You might need to multimeter the wires you cut if it is still an elusive problem. I can't seem to find much on the wiring for the sat nav.

Check for voltage at relay and fuses and work your way back.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • OakvilleGTR
      Turn signal wiring question

      By OakvilleGTR · Posted

      Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      My heads are cathedral port! It's likely possible, but I don't want to add any extra moving parts (I know they don't move) between the heads, manifolds, etc. It will also affect how injectors/fuel rails etc sit and I don't really know if it would change how the FAST manifold goes/sits/fits. I have the LS6 steam pipes already as I have a very late LS1 block so it should be fine. I couldn't find anyone who had ever actually used one for this purpose, it seems 100% of people grind the water pump. The thermal spacers are 12mm and are half way to the cost of the newer water pump anyhow... so if it comes to that I suppose I'd rather buy a new pump. The bearing in the pump I do have is a little.. clunky, but it hasn't done that much time and I never noticed it when the car was together in the past few years, so..
    • sonicii
      Lower A arm Skyline v35

      By sonicii · Posted

      The bushing has failed, not all that uncommon for a car of this age.  Any mechanic should be able to push in a new bushing for you, or you can probably buy the entire lower control arm, complete with bushes.
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      Could you not use "thermal" spacers to give the clearance, like the ones I used between the blower and head? That raised the manifold height by around 10-15mm Albeit the ones I used were for cathedral ports, but I assume they have similar for rectangular ports????
    • Red Sky II
      Looking for autoelectrician in Perth who can do the OEM to double din stereo upgrade.

      By Red Sky II · Posted

      Thanks Paul I reached out to Autotainment but they no longer work on JDM cars as the guy who used to do the work moved on and is no longer doing that kind of work. I am talking with Level Up Audio though.
×
×
  • Create New...