Jump to content
SAU Community

Recommended Posts

Rears went straight on no spacers at all. they do stick out tho, i had to put 245s on rear. needed to stretch. 275s didnt give me any clearance from hitting guards.

Fronts have 30mm bolt on spacers, was running 245s on front but as soon as i left tyre power every now and then i could hear them scraping. Ended up running 225s on front, they still scrape sometimes.

I am gonna have to get all four guards rolled just for some extra clearance, I hate hearing them scrape my guards.

Can anyone help out with a decent workshop for rolling my guards or a business?

Will post some more pics tommorow before footy or after if i get a chance.

Oh and for camber nothing has been touched, so unsure on answering that question 4bidn1

Still can't work out how your rears fit ????? Looks good , shoot us a close up pic of how much the rears stick out , what camber you running

the only thing that would be helping him in this instance is the lack of rear camber from having the car sitting so high, don't forget he's running 20's and still has guard gap which means he'd have next to no rear camber and would create him a little bit of inner clearance, the wheels would be poking probably 25mm from standard guards though. it all comes down to your definition of fitment, which is subjective.

personally i'd still be concerned about contact between the inner wheel and strut though with any weight/suspension travel over bumps etc. can you grab us a pic of how much room you have (with the car sitting on the ground obviously, not jacked up) to satisfy my curiosity?

his rear would look pretty similar to this (18x9.5+15 with a 235 sitting at standard height)

100_0526.jpg

and, for reference, just to illustrate how the rear camber responds to the height of your car this is the same setup lowered

100_0572.jpg

Too be honest i wasn't going for the stretched look to start with, I really have had no choice but too.

For these rims to fit i have done what needed to be done, my next option is to get all guards rolled for some extra clearance.

Further down the track i might come across a cheap pair of fronts for the rear.

At the end of the day this isn't my daily, and i am happy with how it is for now.

Thanks for your mixed comments and help over the thread people, footys nearly over for me so i might even turn up on a cruise one day so you can all bag me about my stretched tyres haha......

Edited by 2000 RS

Someone has to be the pioneer!

I struggled with a guard roller to get my 9in rims covered and ended up getting better results with a piece of pipe between the tyre and guard (once I worked out what Yokatas quote about "baseball bat is your friend" meant).. In order to accommodate 10in rims I think you would have to follow Psymin's example and get the guards extended at a panel shop.

Too be honest i wasn't going for the stretched look to start with, I really have had no choice but too.

For these rims to fit i have done what needed to be done, my next option is to get all guards rolled for some extra clearance.

+1 not a huge fan of the stretch mate, but at the end of the day, I can see where you're coming from. Someone had to do it first right, and it is your car in the end!

Would look EPIC with fat tyres and flares IMO.

Cheers,

Shaz

  • 7 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • How to wreak havoc at a bogans party... Swap out the goon bag hanging from the clothes line with oil bag... Watch chaos ensue during Goon of Fortune....
    • Hey everyone,   I’m looking for some advice on replacing the timing belt on my RB25DET Neo-powered 1998 Skyline. The engine was fully built about five years ago, including a fresh timing belt, water pump, and other essentials. However, since then, the car has only covered around 2,000–3,000 miles. It’s currently making around 650hp.   Even though the mileage is low, I know timing belts have a time-based lifespan too, and most recommendations suggest changing them every five to six years or 50,000 miles. Since I’m at that time mark, I’d rather not take any risks and plan to swap it out soon.   A few things I’d like to hear opinions on: 1. What’s the best belt for this setup? Should I go with an OEM Nissan belt, or is the HKS fine-tune a better choice given the power level? 2. Would you bother replacing the idler pulley and tensioner at the same time, or only if they show wear? 3. When swapping the belt, is it necessary to lock the cam and crank gears in place, or is lining up the timing marks enough? I’ve seen different approaches, and I want to make sure I do it right.   The water pump was changed with the rebuild and isn’t run off the timing belt, so I don’t see a need to replace it again. I just want to make sure I approach this the right way.   Any insight would be much appreciated. Thanks!
    • How does this compare to the internally gated g25-550 in terms of power production at same psi and spool
    • Did you find that your voltage of the battery wasn't where it's normally supposed to be? for example on my r34, it's at 14.5v when running after a few seconds, but I noticed when I had a rough start and it initially wasn't idling correctly, the voltage on my triple gauge cluster was showing lower than usual. Seems like the alternator is starting to crap itself
×
×
  • Create New...