Jump to content
SAU Community

Recommended Posts

Just bought a 2001 300gt and I've searched but still have a few questions.

Done the manifold clean because it had hot starting issues ( it was caked on in there!). Now I have high idle problems. I've tried the reset thingo but still no go. Not sure if I'm doin it right or is there a different sequence for 300's? Just brings up a picture of a spanner and says "pit" on the screen.

Also I've read that 300's don't have vdc bit mine has? Also has a electronic muffler and that sonar cruise control thing. There's a button under the dash near the muffler and vdc controls that says "auto". Anyone know what it does? Small round one.

Please move if not in right section. Cheers

Link to comment
https://www.sau.com.au/forums/topic/427797-v35-issues/
Share on other sites

It should work, it works on vq25det motors, which have similar ecus. The timing is the most critical thing, and it must be done when the car is hot.

Pit screen is totally unrelated. Pit screen is just a service reminder scheduled into the on board computer. It requires a manual reset you go through the menus to do.

What do you mean vdc? Traction control?

Auto is probably the rear mirror tilt.

Link to comment
https://www.sau.com.au/forums/topic/427797-v35-issues/#findComment-6909313
Share on other sites

Thank mate, guess I'm just a dud then

Ah k at second glance the button has a picture of a side mirror on it so it might be that?

Yea vdc (vehicle dynamic control) I believe it's called. Makes no difference on/off guess maybe in the wet or really flogging it.

Cheers

Edited by OUTATIME
Link to comment
https://www.sau.com.au/forums/topic/427797-v35-issues/#findComment-6909321
Share on other sites

No v35 has VDC in the true sense of the modern system.

The rwd models have traction control, which cuts power once rear wheel slip is detected. It does not provide any assistance to gather the car back up into control.

Awd models as in stageas and g35x don't have any systems but the attesa awd system.

Yup, it tilts the side mirro down when in reverse to see the kerb.

Link to comment
https://www.sau.com.au/forums/topic/427797-v35-issues/#findComment-6909330
Share on other sites

No v35 has VDC in the true sense of the modern system.

What do you mean 'true sense'?

The 350GTs have VDC that can brake individual wheels when it detects loss of control based on steering wheel angle, wheel speed and yaw sensor. and it does much more than the basic TC that the 300 and 250GT has which just prevent rear wheel spin due to a heavy right foot.. Although VDC may have been an option on those according to the OP's info.

Link to comment
https://www.sau.com.au/forums/topic/427797-v35-issues/#findComment-6909365
Share on other sites

What do you mean 'true sense'?

The 350GTs have VDC that can brake individual wheels when it detects loss of control based on steering wheel angle, wheel speed and yaw sensor. and it does much more than the basic TC that the 300 and 250GT has which just prevent rear wheel spin due to a heavy right foot.. Although VDC may have been an option on those according to the OP's info.

Really? Cool. I thought they only got TC not a proper stability system. RWD stageas only got traction control, no vdc. Which is a bit lacking by 2007.

Link to comment
https://www.sau.com.au/forums/topic/427797-v35-issues/#findComment-6909969
Share on other sites

Really? Cool. I thought they only got TC not a proper stability system. RWD stageas only got traction control, no vdc. Which is a bit lacking by 2007.

yep, mine gets tested every now and then. There is an off camber roundabout near my house that gets stupidly slippery with the first rain of the wet season.

Link to comment
https://www.sau.com.au/forums/topic/427797-v35-issues/#findComment-6910023
Share on other sites

Really? Cool. I thought they only got TC not a proper stability system. RWD stageas only got traction control, no vdc. Which is a bit lacking by 2007.

Yeah but even when you turn it off it still keeps the braking/antislip on so if you are used to a car stepping out and tap the brakes the anti slip kicks, or even go round a wet corner under slight brakes it kicks in only braking one caliper... weirdest/worst feeling if you try to correct it like a normal RWD car, almost conterproductive
Link to comment
https://www.sau.com.au/forums/topic/427797-v35-issues/#findComment-6910204
Share on other sites

Yeah but even when you turn it off it still keeps the braking/antislip on so if you are used to a car stepping out and tap the brakes the anti slip kicks, or even go round a wet corner under slight brakes it kicks in only braking one caliper... weirdest/worst feeling if you try to correct it like a normal RWD car, almost conterproductive

I have heard that a simple 'press-off' will only turn it off up to 60km/h, and there is some other procedure for switching it off for all speeds, something like holding the button in for 10 sec.. never tried it myself, so I can't be sure.

It should turn off VDC and TC. but I don't think it turns off ABS.

Link to comment
https://www.sau.com.au/forums/topic/427797-v35-issues/#findComment-6912148
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...