Jump to content
SAU Community

Recommended Posts

Hi I'm looking at purchasing an R33 GTR Vspec. Car looks arnt aesthetically pleasing but great little number. Only problem I have is a weird humming/grinding sound coming from what sounds like cyl 1, the front cyl. While the car is idling you can hear the sound, but as soon as any load is on the car or you touch the throttle it disappears. Will post a video to go with, any ideas at all would be a great advantage.

trim.hmSn5q.MOV

Link to comment
https://www.sau.com.au/forums/topic/428258-weird-noise-r33-gtr-vspec/
Share on other sites

55k windback km? That engine bay doesn't look too flash.

The whirring noise sounds like timing belt. Either the cover is bent and rubbing on the pulley, the belt is rubbing somewhere or the belt is tensioned too tightly.

But at that price for a R33 (assuming everything else is good), I wouldn't worry too much. Just budget a replacement engine or a rebuild.

To the best of everyone's knowledge the k's are legit. Was imported, purchased and used on 5 occasions, 3 inc getting the shopping. Will be doing a more in depth look in a couple of weeks and taking a gtr owner with me, so he can let me know of anything else to look for. Will pop off some covers and have a snoop on the next visit.

It could be as easy as an accessory belt idler or accessory bearing, or as potentially sinister as a timing belt idler or even a worn harmonic balancer. Bit hard to tell with just a video though.

To the best of everyone's knowledge the k's are legit. Was imported, purchased and used on 5 occasions, 3 inc getting the shopping. Will be doing a more in depth look in a couple of weeks and taking a gtr owner with me, so he can let me know of anything else to look for. Will pop off some covers and have a snoop on the next visit.

They aren't legit, unless you mean 255,000kms.

Edited by BuuBox

55k windback km? That engine bay doesn't look too flash.

The whirring noise sounds like timing belt. Either the cover is bent and rubbing on the pulley, the belt is rubbing somewhere or the belt is tensioned too tightly.

But at that price for a R33 (assuming everything else is good), I wouldn't worry too much. Just budget a replacement engine or a rebuild.

i have to agree

the belt on my 32 was too tight and sounded very similar to this...

but judging off that clip motor doesn't look like its got 55 xxxkm i wouldn't be trusting what people have to say about the kms

The car isn't really in a local area, it's about 400km return. When I return l'll be doing a more in depth look, will do a compression test inspect the heck out of everything. In the cars defence, it was parked in an open sidded shed, out on a farm over a year ago. There is wasp nests and mouse/rat crap everywhere and urine scented interior. The video was taken after the car had been started for approximatly 5 mins. This is the first time it was started since parked in the car. I have heard from a few sources that due to it sitting so long the lifters could dry out which could have been the noise. Unfortunately after the test drive I didn't pay attention to whether the noise was still there, (shake head). Unsure at the moment of the cars history, the owner and knowledge of the vehicle wasn't there at the time, it was only his son, (there's the car, over in the shed) knew it was a gtr and black? That was really all.

Consider the expression "Dont buy other people's problems". Ignore the kms when considering it because they're regularly dodged, and there's always a story around why its so low. Buy based on condition, and by the looks of it that thing is a high kms pile of crap. So only buy if its really cheap and you want a fixer upper/something to restore. If you want something to just get in and drive, get something else.

  • 2 weeks later...

I read through this whole thread before watching the video in the OP - There's no way that car has only done 55,000km, regardless of how 'neglected' it was. I'd run in the opposite direction, unless it was sub 10k, then maybe.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm selling my personal race car. 1992 BNR32 Skyline GT-R About eight years ago the engine developed the dreaded low oil pressure problem. I removed it and found the issue. However shortly after I moved half way across the country, moved my work shop, bought a house, got married, then moved my shop again to it's permanent location for the time being. in turn I do not have the time to race this car as it should be. In turn the engine I built for this car will end up in my street car and this car I hope finds a home with someone who can use it to it's full potential. The roll bar was built by Jason Noren Fabricaiton in Pomona California to SCCA and NASA Specs. The car used to compete in redline time attack and global time attack enthusiast class. It also has a fire suppression system.  The car is with me at my workshop in Kyle Texas, USA. Shipping it is no problem, I can personally deliver the car to the port of either Houston or Los Angeles. Any other port depending on where it is may require transport but we can always work that out.   The chassis itself is rust free, rear quarters and under fenders are free of any rust so it's a very solid foundation for anyone who wishes to move forward with it. As posted and at the asking price of $20,000 USD the car includes all of the following;   All OEM Body panels, front fenders, rear bumpers etc.  OEM Nissan Projector headlamps (Pictured N1 lamps were removed) OEM Nismo Side Skirts / Extensions OEM Rear Spats  Front & Rear Subframes are installed car is full roller Rear Subframe has Cusco Camber Arms, Whiteline HICAS Elimination Front Subframe has Whiteline tension rods and whiteline Sway bars w/ endlinks.  Buddy Club N1 Coilovers All chassis wiring and engine wiring is in tact. Attessa System is fully in tact and was functional before engine removal.  BCNR33 GT-R Brembo Brakes F+R with Endless MX72 Plus Pads, DBA Rotors & Stainless Steel Brake lines Billion Racing Radiator Billion Radiator Hoses Fluidyne Engine Oil Cooler Accusump System (trunk Mounted) 5 Speed Transmission w/ Transfer Case F+R Prop-shafts Rear Differential With rear Axles.  Nismo Gauge Cluster Nismo Clutch + Flywheel   Essentially what is needed to make this car running and driving again is as follows: A working Engine, an ECU, and time to put it together. The price posted is or best offer as I am willing to remove some components to accommodate price to a certain extent. If any serious buyer wants full detailed pictures, videos, or any questions I'll be happy to answer them. I believe this car is priced to move quickly considering it's a rust free and very straight chassis but always open to fair negotiation.  I can be contacted via phone or email. (+19517081648) email is juan@bardabe.com   
    • So...to my (and my mechanics doing the swap) surprise...the oil pan from NEO engine does not fit 100% and needs to by modified like this: It is not a huge problem but in the future i want a "proper" oil pan. So question is...what different oil pan can i get to fit without any problems and modification? Thanks! 
    • Some more info I found.  These are the last entries Yoshikiyo Fujii made on his blog before he passed away in 2009: http://blog.livedoor.jp/fujii_dynamics/ And finally this is where the workshop was situated:  https://maps.app.goo.gl/HhTPtHzt3WVcBTiEA  
    • shit boxes, kids, and daily drivers are all welcome
    • Cam seals go hard. It's a very old car.
×
×
  • Create New...