Jump to content
SAU Community

Recommended Posts

Have to run ATM but will look into those later .

Firstly I looked at the Michelin timeline and came across a recent development in the pilot tyre range . Its called Pilot A/S (all season) 3 and it became available in late 2012 and after the Pilot super sport - and available OS in 255/40/17 .

I started reading this review which looks interesting but ran out of time .

http://forums.corvetteforum.com/wheels-and-tires/3190984-my-review-of-the-michelin-pilot-sport-a-s-3-tire.html

Might see if I can get a pair sent over and throw them on for a try , if these are almost as good as PSS and work over a greater ambient temperature range they look good . Probably too soon to know how well they wear compared to PS2 PS3 and PSS but being an all season rather than a maximium performance summer tyre maybe longer life .

More later , cheers Adrian .

 

Its called Pilot A/S (all season) 3 and it became available in late 2012 and after the Pilot super sport - and available OS in 255/40/17 .

I started reading this review which looks interesting but ran out of time .

http://forums.corvetteforum.com/wheels-and-tires/3190984-my-review-of-the-michelin-pilot-sport-a-s-3-tire.html

Might see if I can get a pair sent over and throw them on for a try , if these are almost as good as PSS and work over a greater ambient temperature range they look good . Probably too soon to know how well they wear compared to PS2 PS3 and PSS but being an all season rather than a maximium performance summer tyre maybe longer life .

More later , cheers Adrian .

 

They have a UTQG of 500. Methinks they will be made of inductrial grade asbestos compared to the 180-200 wear rating tyres most people are using. Should stick like olive oil to teflon.

I haven't read the rest of the above linked review but one person said that it took some pushing to make his car drift and it hung on almost as well as Pilot Super Sports do and they feel pretty good on my car . Not sure what the wear rating on PSSs are . Remember I want better life than the PSSs gave and going a little wider can't hurt . I've had 235 and 245 so I want to give 255s a go and prefer Michelin .

A .

I used michelin pilot sport 2's fod years. There a good allrounder for street and a bit of track work. But I found they always would wear out to quick. I'm considering a tyre change with good good grip and a reasonable price. Any suggestions.???

I got over 60,000kms and 5 years 0ut of my ku31 kumhos, they're due for a change but still holding on with about a mm off the wear markers..you don't also have to spend big brand for good tyres...

ThOugh that said kumhos were alot cheaper when I bought them, prices seem to have risen considerably

I got over 60,000kms and 5 years 0ut of my ku31 kumhos, they're due for a change but still holding on with about a mm off the wear markers..you don't also have to spend big brand for good tyres...

ThOugh that said kumhos were alot cheaper when I bought them, prices seem to have risen considerably

Don't know why people keep bagging KU31s out, they are an awesome tyre for the price. I will happily run them on my GT-R, have before. They shame more expensive tyres. You can still get them cheap (e.g. tempe, ozzy).

Dunlop Sport Max TT (there are 3 sport max models, I got the middle one).

Fronts (235/45/17) are almost finished after 50,000km. Rears (255/40/17) lasted about 35,000km and I got another set. Still haven't figured out why the rears wore out first :whistling:

These are great, they maintain their grip levels right to the very end and last well too if you don't abuse them. They're expensive but you get what you pay for. I think skimping on tyres on a peformance car is retarded. If you want economy go buy a hyundai.

I had RE001's previously on my stock rims but they went hard when half worn and were dangerous in the wet. I then kept them as Texi tyres and they lasted several texis before getting down to the belts, took ages to kill them. Way too hard for a road tyre.

FWIW, a good competitor to the Dunlops mentioned above is the Goodyear Eagle F1 Asymmetric 2. In 235/45/17 they are currently available at tirerack for US$95 each, plus $US270 odd for shipping to Australia. Works out <$200 each for 2011 manufactured tyres (ie, not too old by a long shot). Dunno about other sizes.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • No intention of driving the car the way it's set up now, just wanting to make sure I haven't made any mistakes along the way so that the tune can go smoothly, I don't want to waste anyone's time with stupid issues. And of course I intend to get it towed to the dyno in a completed state 😅 I have the base fuel pressure with the vacuum disconnected set at about 40psi, which I believe is at least relatively close to stock fuel pressure, maybe I'll have a fiddle with the reg and see what happens. For all I know I could be wasting my time with this and I should just plumb it in and see what the tuner reckons. I just find it a bit strange that it seems to be under so much load just free revving, but maybe that's just a result of the turbo slowing down the exhaust gasses and making a restriction in the flow, with no boost to compensate.
    • The boy just hit up google translate and it worked a treat, he said step one was "please urinate with precision and elegance", he then sent me the correct translation  I get some new loctite for the small fixtures tomorrow and get some "dort" going after that 🤣
    • Right, so is the fuel pressure the same as it was previously? If not, well, it's not going to work well. I can understand the theory I assume you are going for, which is: "Run it N/A, and if I have the original AFM, and same amount of fuel and intake air as previously, the fact there's a turbo in my exhaust should still make it run" Which it... might? Provided you don't actually change how much air or fuel is going into the car.. or getting out. But if you have changed that, all bets are off. What is the purpose to even have the car run this way? To get it to a tuner? And if the goal is to limp it to a tuner, you're still going to what - plumb up a whole intercooler system and new intake in the parking lot out front before your tune......?
    • Haha yea it's a bit of a weird setup at the moment, just wanted to make sure I sorted out any headaches before dyno day. At the moment I've changed the exhaust manifold, turbo and downpipe, 460lph fuel pump and rising rate reg as well as the previously mentioned headstuds and gasket. The nistune was already mapped for the car as it was and drove around for a few months no worries. The plan is to run flex fuel hence the big pump, which I've wired direct to the battery through a relay to avoid voltage issues.
    • Um. Was the ECU the same as the one previously there? I know R33's needed R32 GTST ECU's or other tomfoolery to run Nistune. This is such a wild setup. Most people would plumb in the turbo then not drive the car (i.e tow it to a tuner). What's actually changed since it last ran?
×
×
  • Create New...