Jump to content
SAU Community

Sau Nsw Tech Night: Suspension & Steering @ Heasman 06/09/13


Recommended Posts

Gday Guys, My names Brad Heasman, thought id quickly introduce myself here before I meet all of you on Friday night.

I currently work in sales and marketing in our Bilstein department, but did 3 years as a mechanic in our workshop. Im 21, love nissans, and I own and race a Nissan s14 time attack car. (which you will see on Friday)

On the night we will be having a bbq, so when you arrive there will be some food and drinks here, We will have our Bilstein engineers here, our sales guys, and some of the workshop guys here for you to talk to, or ask any general questions while we eat.

Look forwed to meeting you all!

Hi Brad and welcome to Skylines Australia NSW.

My son Clinton and I have been experimenting with suspension components for a number of years now and have accumulated a collection of Buddy Club, Ohlin and Pedders shocks before we went down the Bilstein path. During this time we have received a degree of assistance and advice from your staff plus a number of components through this journey.

On our R33 GTS-T we started with PSS9's from a GTR with fabricated spacers due to the difference in shock length between GTR's and GTS-T's.

post-24210-0-66142100-1378304806_thumb.jpg

post-24210-0-93513500-1378305125_thumb.jpg

To reduce unsprung weight and clearance issues we then moved on to Eibach springs with Pedders top mount blocks that allowed the use of standard top hats instead of the HKS style which chop the bushes out in a very short time.

post-24210-0-57365700-1378305482_thumb.jpg

post-24210-0-09689600-1378306030_thumb.jpg

We then focused on the rear suspension and decided to install a completely refurbished GTR rear cradle to improve our drive train and allow the use of matching Bilstein PSS9 shocks.

post-24210-0-42439300-1378306529_thumb.jpg

post-24210-0-11811300-1378306670_thumb.jpg

Again we went down the path of Eibach springs with Pedders top mount blocks that allowed the use of standard top hats to reduce unsprung weight.

post-24210-0-90991700-1378306763_thumb.jpg

We have been very impressed with the quality of the Bilstein product and we a now working through what seems to be a never ending set up and adjustment adventure.

I hope that you and your staff can provide some advice with ride height changes and the impact on roll centre and roll couple pertcntage.

I would like to go to this but won't be able to get there until after 6:30pm. Will that be a problem?

Finally pulled my finger out and sent my SAU membership and payment through today. :)

I would like to go to this but won't be able to get there until after 6:30pm. Will that be a problem?

Finally pulled my finger out and sent my SAU membership and payment through today. :)

last one said meet at 6, start at 6:30... it started at about 8.

you might miss food if you get their late

I'm confirmed. Leaving North Ryde 5:30pm travelling by car...hopefully no traffic catastrophes will see me there by 6:30pm. Pumped!

Happy to give a couple of people a lift back Chatswood way if required!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I'm not up to date on the latest, but for basic modifications like pod filter, lower springs etc you can get a modification permit at the time of inspection.  For more serious modifications you will need engineering.  Intercoolers used to fall into the mod permit rule but its been a long while since i looked it up.   Either way you will be able to get it registered, just a case of $300 vs $3k . 
    • Hi everyone! I’m the new owner of a 1996 R33 GTS-T, I’ve purchased this car over from Queensland and brought it to Western Australia and I’ve found that there is a hole cut out in the engine bay for the FMIC that enters into the wheel well (fender liners are in the boot). For anyone that has had to get their car over the PITS here, will this be a major issue?   
    • Yeah I've spotted this one too, whenever it's lotto superdraw week and I'm browsing car sales dot com for my new ride They must be dreaming, maybe it's worth 150k for the link to Brock?
    • 100% accurate!  We are a pack of know it alls....  But, I bet people go to you when they have a problem! I've been on a bit of a clean up rampage too over the past month!  I've thrown more shit in the bin over the past 2 weeks than I have in the past 3 years combined! Anyway, it's all good fun being different! My wife sometimes does not agree!  
    • ADHD in all form isn't about "can focus, or can't focus" or is hyper active or isn't etc.   It's all a dysregulation. Either time feels to be stationary, or time just vanishes in a split second. We are either under focussed on the task at hand (as we're over focussed on our surroundings) or we have no idea an atomic bomb went off beside us as we're so hyper focussed and locked in on things.   Not to mention the rapid fire thought process. What it takes a "normal" process to think up a solution to a problem, ADHD will be able to give you 5 different ways to solve the problem, and the pros and cons of each. While we can be highly impulsive and lack the ability to "control ourselves" we can also become paralysed with the inability to make a decision for ourselves. While most of us have an OCD like requirement for perfection, we lack the ability often to remain focussed to get things to a perfect state. Those with undiagnosed ADHD as adults, can often find the last part actually stops them ever attempting to do things that they have the ability to do, as the reasoning is often "if I can't do it perfectly, it's not worth doing"   As for projects... Ha ha ha, I still need to take the other half of my wall trim down in the Fiance's office so I can paint it. Need to finish digging and running the back yard drains, my R33, getting the Ninja bike registered (now being sold), the moped project, fixing either of the lawn mowers so they're reliable, along with a myriad of other things.   It's why I've been going through lately and just being brutal and clearing projects off that I won't actually ever complete. IE, moped will go to the tip, or be given away, bike is being sold, Subaru project being sold, some parts for other projects given away. Or I've been making myself focus on one thing at a time, by ticking off the smallest quickest ones first.   There's also a reason by our mid twenties we seem to be "know it alls", as we've all been down some of the weirdest and oddest rabbit holes when you follow the dopamine trail. It's often also why we're more a jack of all trades, but not a master of one.   However, pretty much all of my hobby projects, in one way or another, all come back around to automotive. That's my zen area.
×
×
  • Create New...