Jump to content
SAU Community

Recommended Posts

Decided to part out my R33 build.

R33 4 door Rolling shell.

Complete minus engine & gearbox.

Register-able, straight, Silver, no major rust, 213,xxxk's on chassis. GTST brakes with slotted rotors, Non ABS, Non hicas.

$4K ono

IMAG0056.jpg

IMAG0047.jpg

RB25DET Long motor assembly.

All machine work carried out by James Race Engines/Engine Action Flemington
Original standard bottom end(Rods, pistons & crank).
New Genuine Nissan Rings
ACL Race Series std main & big end bearings
ARP Rod Bolts
Block crack & pressure tested, decked & honed square to bores
New Welch Plugs
Crank crack tested, Grub screw cleaned & balanced, Journals polished & Crank collar fitted
N1 Oil Pump(Cover screws removed, loctited & torqued)
N1 Water Pump
Nismo low temp thermostat
Greddy magnetic sump plug
Tomei Oil restrictors installed in rear 2 galleries
Stock head, crack & pressure tested, decked
Supertech bronze valve guides
HKS adjustable exhaust cam gear
New Genuine Nissan seals & gaskets all around
New Genuine Nissan timing belt & bearings
New Genuine Nissan head bolts
Head assembled by James Race Engines, bottom end assembled by myself, all clearances checked & bolts torqued as per Nissan Service Manual with ARP ultratorque assembly lube(Have photos of entire engine assembly & reciept for machine work)
Rocker covers cleaned & finished in VHT wrinkle black
Engine is brand new, still on Engine stand.
$4.5K ono Worth more than this in parts and machine work alone.
IMAG0258.jpg
IMAG0216.jpg
IMAG0212.jpg
IMAG0209.jpg
IMAG0208.jpg
IMAG0204.jpg
IMAG0196.jpg
IMAG0152.jpg
IMAG0065.jpg
HKS Super Drager Catback exhaust(mid section not shown but is included)
$650 ono
9s9fs4.jpg
2cffk12.jpg
Brand New In Box Koyorad R spec 53mm radiator. Top tank has been painted satin black, easily reversible if not your taste.
$500 ono
2m6juqo.jpg
Tomei R33 3 point strut brace, repainted mounting plates in original colour nd new hardware installed.
$400 ono
2wgy9eb.jpg
Tomei R33 Master Cylinder stopper(This version is for ABS models only, will not fit with non ABS master)
$150
2ujo0ht.jpg
Tomei Pod filter adapter & black K&N filter(Has hole spacing for SR AFM, easy enough to mark and drill holes for RB AFM)
$150
2vnou2e.jpg
1zz1991.jpg
Tomei Oil cooler setup. Rarest of the rare, have not seen another one outside of Hyper Rev mags, 13 row cooler core, stainless braided lines with Keith Black Pro(Now XRP) fittings. inbuilt thermostat, oil filter relocation.
$1K ono
qxsby0.jpg
i4quc7.jpg
R33 Mines cluster, Has GTST Tacho but easy enough to swap with GTR one.
$600 ono
i5n5ax.jpg
All prices are negotiable, will be adding more items over the coming days.
  • Like 1

HKS EVC IV Boost controller, complete setup, also includes 2 brand new genuine foam filters.

$350 ono

2dtofit.jpg

Apexi Rev/Speed meter, Digital tacho & speedo, timers for 0-100/200/300kmh & 0-400m has peak recall function as well.

$250 ono

240zlmo.jpg

Recaro SRII Lemans recliner. No rail, excellent condition, slight crush on right hnd bolster otherwise flawless.

$650 ono

2qkttvo.jpg

Greddy warning boost guage, includes both black & white face gauges & Genuine Greddy gauge holder.

$300 ono

11qietc.jpg

2gucfpc.jpg

5xn29.jpg

ARC Blow off valve

$80 ono

2chp0m0.jpg

Tein castor arms, used but in good condition, include box & documentation.

$220 ono

2webfog.jpg

JIC Magic rear camber arms

$70 ono

120lbmx.jpg

Brand new in Box Genuine Nissan N16 Pulsar 6 stack CD changer, includes everything required for install, whilst it is designed for the N16 will be easy enough to adapt to other models.

$250 ono

2mhakrd.jpg

Pioneer Carrozzeria TS-C016A Carbon Kevlar splits.

$120

n1z4ux.jpg

okburd.jpg

Nismo RB25 engine mounts, brand new in box, have been test fitted onto engine but that's it.

$250 ono

2u469t1.jpg

Brand New Genuine Nissan Welch plug set for RB25, had bought for my build but machine shop put their own in so not needed.

$100

mb47zr.jpg

Brand New Conceptua tuning copper factory replacement heater core.

$150

23t60ko.jpg

man that's some nice collection of parts for sale. Good luck with the sale!

Cheers mate.

ah why the change of plans?

Unfortunately really can't afford to finish it to my standards anytime soon but can't really afford to have it all sitting here doing nothing either :(.

Nismo Rear upper strut brace(Pokes up through parcel shelf, shelf trim will require modification)

$300

20ffe36.jpg

Factory rear boot strut brace

$100

2mwuwjc.jpg

Trust front pipe & Unknown test pipe

$150 for front pipe & $70 for test pipe or $200 for both

23sayko.jpg

2l8vujp.jpg

Set of 6 S15 480cc side flow Unisia Jecs injectors, have not had flow tested to confirm but this is what they were sold to me as.

$200

i52bgn.jpg

Apexi GT Spec Rad cap

$30

2qc0c3s.jpg

Apexi Power Intake Filter

$50

mw7fq8.jpg

Superpro Steering rack poly bushes

$40

30az5o9.jpg

Pivot Earth wire kit

$50

qrj8m8.jpg

Brand new aftermarket reciever drier

$25

4ucbas.jpg

Brand new NGK/NTK O2/Lambda Sensor

$50

rho6mr.jpg

6 Autobahn88 Poly exhaust bushes

$30, if you buy Super Drager catback I'll throw these in for free.

2i9r28m.jpg

R34 GTT Series 2 stock front seats, drivers seat has been repaired at some point in otherwise great shape.

$150

fodg11.jpg

Autobahn88 black silicon intake pipe

$100

fn4aom.jpg

Oil filters

$25 each for Nismo, $7 each for Bursons/Ryco

2z5vlmg.jpg

T3/T4 bush bearing rebuild kit

$100

2qm2n9y.jpg

R33 Series II Alloy cooling panel, painted black with stickers as pictured

$80

r040h3.jpg

Super Advan SA3R 17x9 +22 all round, includes full set of centrecaps and 235/45 Federal 595's with plenty of meat on em. I bit of gutter rash on one rim as shown in photo and baked on brake dust on the barrels but in otherwise excellent condition.

1k ono

30cafl3.jpg

2vskaaf.jpg

Super Advan SA3R 17x9 +38(centres repainted gunmetal) & 17x8 +35, rash on all rims, full set of centrecaps as well. Camber worn Kuhmo KU21's.

$350 for full set or $200 a pair.

2mzmahk.jpg

DC2 Integra Type R stock wheels. 15x6 +42, 4x114.3 stud pattern. in excellent condition & include all centrecaps. 1 pair with Bridgestone Grid II 1 pair with Yokohama DNA GP 195/55 all around with good tread.

$400 ono

2rogf1s.jpg

Unfortunately really can't afford to finish it to my standards anytime soon but can't really afford to have it all sitting here doing nothing either :(.

Such a Shame... :(

Edit* Just lower your standards and Love the beast for what it / she is... :yes:

O2 Sensor SOLD

Nismo Rear upper strut brace SOLD

Koyorad SOLD PENDING PAYMENT

Tomei MCS SOLD PENDING PAYMENT

Cooling Panel SOLD PENDING PAYMENT

Mines Cluster SOLD PENDING PAYMENT

Tein Castor Arms SOLD PENDING PAYMENT

JIC Camber Arms SOLD PENDING PAYMENT

  • 3 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Major thread necro but how bad of a job is it to DIY? Looking at it online it looks like if you reuse your ring and pinion as long as those are in good condition it should be fine to just pull the axles/front cover and replace the diff that way? Or should I be replacing everything and doing preload measurements/gear mesh testing like the factory service manual mentions for the rear diff?
    • in my list I had the R33 GTR as the best Skyline. Infact I had all GTR's (33>34=32), the NSX, the GTO, the 300ZX, the 180SX, the S15 better than the FD RX7. I had the MR2 and the A80 as 'just' better. I also think the DC5R Integra looks better but this is an 01 onwards car. I also think the FC>FD. It's almost like aesthetics are individual! The elements @GTSBoy likes about the FD and dislikes about the 180 are inverse in my eyes. I hate the rear end of the FD and it's weird tail lights that are bulbous and remind me of early hyundai excels. They are not striking, nor iconic, nor retro cool. The GTO has supercar proportions. I maintain these look much better in person (like the NSX) especially with nice wheels and suspension which is mandatory for all cars pretty much. Some (or all) of these you have to see in person to appreciate. You can't write a car off until you see one in the flesh IMO. Like most people we probably just like/dislike cars which represent certain eras of design or design styles in general. I also think the 60's Jag E type looks HORRIBLE, literally disgusting, and the 2000GT is nothing to write home about. FWIW I don't think the Dodge Viper Gen1's have aged very well either. You can probably see where I rate bubbly coupes like the FD. I know we're straying now but the C4 and C5 absolutely murder the Viper in the looks department as time goes on, for my eyes. Wouldn't surprise me if people who love the FD, also love the MX5, Dodge Viper, Jag E Type, etc etc.
    • I used to hate R31s, and any of the other Nissans that led up to it, and any of the Toyotas with similar styling, because of the boxiness. They were, and remain, childish, simplistic, and generally awful. I appreciate R31s a lot more now, but only the JDM 2 door. The ADM 4 door (and any other 4 door, even if they are unique compared to our local one) can eat a bowl of dicks. The Aussie R31 is also forever tarnished by their association with stereotypical bong clutching Aussie R31 owners of the 90s and early 2000s. I think the Nissans of the 70s (other than 120Y/180B/200B) are far superior looking to the 80s cars. The 240K era Skylines are boss. The same is broadly true of Toyotas. Hondas don't ever register in my thinking, from any era. Mitsus are all horrid shitboxen in any era, and so also don't register. Subarus are always awful, ditto. Daihatsus and Suzukis also don't generally register. They are all invisible. I think the SW20 MR2 looks fiddly. The 3000GT/GTO is like that but way worse. Too many silly plastic barnacles and fiddly gimmicks ruined what could have been a really nice base shape. Kinda-sorta looks like a big heavy ST165 Celica coupe (and I'm not sure if that's a good thing or a bad thing). I think the 180SX is dreadfully bland. It's not bad looking. But it has no excitement to it at all. It's just a liftback coupe thing with no interest in its lines, and bad graphical elements (ie wide expanses of taillight plastic on the rear garnish). The S13 Silvia is a little better - getting closer to R32 shapes. But still....bland. S14? Nope. Don't love it. S15...a little better. Probably a lot better, actually. Benefits from not being like a shrunk in the wash R34 (where the S13 was a shrunk in the wash R32 and the S14 looked like a Pulsar or something else from the stable on Nissan mid 90s horrors). The Z32 was hot as f**k when it came out but hasn't aged as well as the A80. Keep in mind that I think the R33 is the most disgusting looking thing - and out of all the previous cars mentioned is objectively closest to my precious R32. It's just....real bad, almost everywhere you look. And that is down to the majority of what was designed in the 90s being shit. All Nissans from that era look like shit. Most other brands ditto. In that context, the FD absolutely stands out as being by far the best looking car, for reasons already discussed. Going behind the aesthetics, the suspension alone makes it better than almost any other car.  
    • If they just called it the "Mazda Tiffany", it would have been spot on.
    • Yup but for me its the HR ! Cut my teeth on the old holden 6s in the day ! And here's me thinking in the day it was also the 300ZX and the Mitsubishi GT3000 ! All, as well had good lines, but always seemed to need finishing off, style wise.
×
×
  • Create New...