Jump to content
SAU Community

WSID street meeting Sat 12th June

DoughBoy

By DoughBoy,
in Events Archive

 Share

Recommended Posts

  • Replies 84
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

hawks Mentor

hawks

Posted
Posted

what a long day :D

well i finally popped my drag cherry with a first ever run of 13.338 @ 101.35 mph

it just went down hill after that, because i took it easy on the first run, i decided to go hard on the second, flooded my motor in the burnout and fouled the plugs. the result was a sixteen something. we put new plugs in it in the carpark, but the motor was running like a dog (it wouldn't rev out properly), with another sixteen something on the third run. i decided that was enough, because i still had a 3 hour drive home in the poor thing.

next will be a tune (the motor has 3,800 k's on it and has never been tuned), then look out i will be back !!!

a few things that suprised me on the day were lack of organisation of the scruntineering and instructions for a newbie, and the amount of traction i had with street tyres !!! there is plenty of rubber on the start line :D

big ups to r33vit and benm for having a chat between runs (i thought it was nearly an hour between runs).

good to meet a few new guys :headspin:

and Bu5ter, our auto's will own everybody :)

:D

R33vit Experienced

R33vit

Posted
Posted
big ups to r33vit and benm for having a chat between runs (i thought it was nearly an hour between runs).

good to meet a few new guys :headspin:

and Bu5ter, our auto's will own everybody :D

:D

Hey Hawks

Nice to meet you mate and Im glad you got the car home OK...

I ended up burning a clutch out so no new PB for me :D

DoughBoy Veteran

DoughBoy

Posted
  • Author
Posted

I don't think anyone had any real luck yesterday, someone please post up they didn't have any problems and ran a personal best!

There must have been something like 200+ cars there, all the staging lanes were filled + there was the line going all the way around the carpark.. didn't someone say the street meetings are empty? :D

Once again, the SAU people made the event fun. Thanks guys!

R33vit Experienced

R33vit

Posted
Posted
There must have been something like 200+ cars there, all the staging lanes were filled + there was the line going all the way around the carpark.. didn't someone say the street meetings are empty? :D

I think it was because of the long weekend Chris... Hope to have a new clutch and flywheel B4 the next meeting...

I had set up a water injection kit over my intercooler which blew a hose off on the first run... (rush jobs never work) Will fix it and see if there is any diffrence with this running.. I know BOOSTD run 107-108 mph all night without injection and then 112mph with

I will post my findings once I have used it

benm Grand Master

benm

Posted
Posted

Well that was my last Drag Racing for awhile (doing nite shift at work now) and boy was it fun NOT !!

My tyres were dead after the last Wakefield trackday so I knew that traction was non-existent, actually ever since I got the Ex Cam Gear installed (more torque) traction has been a problem. Think i'm gonna have to get some 255's before I go back otherwise I'm just wasting my time. Still rattling off the 2.1's and 100mph passes just can't string everything else inbetween together to get that 13.x pass.

Gave Buster a run in my car for the last run of the day just for shits n giggles, he managed a 14.7@100mph :D I'm sure he had his eyes shut too after being used to 11sec passes in his car.

Ahh well if all goes to plan i'll be in a totally different car the next time i'm at the drags :D

 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Is this saveable r32 gtr seat

      By MBS206 · Posted

      For something like this, I'd skip just going for the cheapest, I'd find the place with the best experiences people have had, especially for restoration work. Like everything, there is upholsterers, and then there is upholsterers. Some really great upholsterers for automotive restos won't even appear to have an online presence.   My guide would be find some of the old school classic cars that have been fully restored and are immaculate, and ask the people who own them who did the work on their seats
    • The Bogan
      Is this saveable r32 gtr seat

      By The Bogan · Posted

      Might be tricky matching the seat trim material  If your got the funds you "may" want to get the rear re-trimed as well to match the front
    • PLYNX
      Is this saveable r32 gtr seat

      By PLYNX · Posted

      How much is it to re-uploster?  Well that's a "how longs a piece of string?" question !  And I answer thusly: "twice half its length! " . . . . . .  Seriously you'll have to chase multiple quotes for that one from different uphlostrerereres !  Ask around, in your area and on the forums, chase reviews and most of all see the finished product in person cause photoshop is a wonderful thing !
    • DraftySquash
      RB25DET Engine Oil Dipstick Length

      By DraftySquash · Posted

      Hey everyone!!  I've noticed that whenever I do my oil changes, after putting 4L in, the oil level sits at the top mark in the dipstick. This is after letting the old oil drain for a very long time too! I've checked the oil level daily for the past few mornings. It happens every time and it's confusing because all the threads say that it should take about 4.7L (With some just adding the full 5L) My next thought is to figure out if the dipstick I have is correct so could someone please tell me the length of the RB25DET engine oil dipstick?  I've checked images of some of the genuine dipsticks, but none of them have the length in it. https://justjap.com/products/genuine-nissan-engine-oil-level-dipstick-fits-nissan-r34-skyline-c34-stagea-c35-laurel-y34-cedric-gloria-rb25de-t-neo?currency=AUD&srsltid=AfmBOortQXofgmiHVRKuIaiKuygL4k0Ewp68c3isGZk0vvKOJ7Yqf3iB However.... the engraving on the genuine ones say 05002 while mine says AA000. This makes me believe that maybe I have a wrong dipstick? I just want to confirm before I buy a new one. The car is a fresh import from Japan so I don't have details of the previous owner to ask him. Thanks in advance 🙏🏾 
    • RB2533
      UniClutch

      By RB2533 · Posted

      Sport. I didn’t rebleed it cause I just removed the slave and left connected.    I will change line and slave and see how it goes.  
×
×
  • Create New...