Jump to content
SAU Community

Recommended Posts

im building a custom car with a r33 GTR powertrain and a full built rb26 check out my other 2 threads to see what im building and spec. My question is how should i go about building a very strong drive line. Im planning on a exedy twin clutch, all axles and drive shaft are custom built buy driveshaft.com and can handle more power then ill ever have. the rear diff is a stock r32 gtr lsd ill have the LSD rebuilt. the front diff is stock and ill be puting in a LSD. Now the center diff how strong is it ? is there a up grade kit or something that im not aware of? and the transmission i heard that 3rd gear is weak so is there a trany upgrade kit to fix this or do i just have to bit the bullet and buy a race trans like OS Giken? I do have a great transmission builder so a up grade would be no problem. Ill just be smooth on the powertrain till its fully upgraded but i want to be able to run it hard on the track with slick mainly race track but some drag racing. any help or advice with this would be great and if there are some treads i have not read please sent me links Thanks

Link to comment
Share on other sites

You can get gearsets from PPG, PAR, Hollinger, OS Giken, etc.

You can get Quaife and Nismo front LSD.

No idea on centre diff, but I'm guessing you'll be running oil coolers for diffs and gearbox?

Grab a Hollinger 6 speed sequential :D

Link to comment
Share on other sites

yes ill be running rear diff cooler and ill have to look into a tranny cooler never heard of one. you think it would be a good idea to run a front diff cooler as well?

Link to comment
Share on other sites

Auto Gallery Yokohama gearsets (rebuilt boxes)....


these guys in Japan do stronger gearsets and transfer boxes.



Also possibly Dodsons in Auckland NZ for transfer case.

Link to comment
Share on other sites

Am I missing something?

GTR's don't run a centre diff unless you're building a special transfer case using parts from some constant 4WD?

That's the thing... They don't, as you know. :D

Always helps to know the basic mechanics of the car you are building before you go asking for quotes.. I'm sure any workshop would be happy to charge for a 'centre diff' and the send you some metal in a box.

Link to comment
Share on other sites

That's the thing... They don't, as you know. :D

Always helps to know the basic mechanics of the car you are building before you go asking for quotes.. I'm sure any workshop would be happy to charge for a 'centre diff' and the send you some metal in a box.

WOW really.....ok fine a transfer case ,ATESSA just abbreviating

Edited by saulogy
Link to comment
Share on other sites

Try this, google the difference between a centre diff and a transfer case. These guys know the car mate, it's clear your mechanical knowledge is a little way behind theirs. As for "bomb proofing" a gtr powertrain, put at least 40k aside. That's if you want to really do it properly. Lonefield billet cv's, billet driveshafts, carbon props hafts, hollinger sequential gearbox, quaife diffs front and rear, gts4 crown wheel and pinions, modified sump and front diff housing. Then you need to look at clutches, it gets out of control as while you make one thing stronger it creates another weak link in the chain.

There is GENUINELY bomb proofing as you say, then there is sensible strengthening of components

Link to comment
Share on other sites

i want to be able to run it hard on the track with slick mainly race track but some drag racing. any help or advice with this would be great and if there are some treads i have not read please sent me links Thanks

if $$$ is not a problem sure knock yourself out but if $$$ is not infinite, then maybe u should plan on reasonable upgrades. Why pay for a part that can take 2000hp when u will only ever have 1000hp unless of course the price is the same then by all means.

u can make a car fast and reliable without spending exorbitant amounts of $$... :)

Link to comment
Share on other sites

WOW really.....ok fine a  transfer case ,ATESSA     just abbreviating

Pretty big difference between a transfer case and a diff!

To do it on the cheap, properly, you're still looking at least 12k in diffs, clutch, transfer case, gearbox.

That's not taking into account axles, driveshaft or anything else.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Well, yeah, the RB26 is definitely that far off the mark. From a pure technology point of view it is closer to the engines of the 60s than it is to the engines of the last 10 years. There is absolutely nothing special about an RB26 that wasn't present in engines going all the way back to the 60s, except probably the four valve head. The bottom end is just bog standard Japanese stuff. The head is nothing special. Celicas in the 70s were the same thing, in 4cyl 2 valve form. The ITBs are nothing special when you consider that the same Celicas had twin Solexes on them, and so had throttle plates in the exact same place. There's no variable valve timing, no variable inlet manifold, which even other RBs had either before the 26 came out or shortly afterward. The ECU is pretty rude and crude. The only things it has going for it are that the physical structure was pretty bloody tough for a mass produced engine, the twin-turbos and ITBs made for a bit of uniqueness against the competition (and even Toyota were ahead on the twin turbs thing, weren't they?) and the electronic controls and measuring devices (ie, AFMs, CAS, etc) were good enough to make it run well. Oh, and it sounds better than almost anything else, ever. The VR38 is absolutely halfway between the RB generation and the current generation, so it definitely has a massive increase in the sophistication of the electronics, allowing for a lot more dynamic optimisation of mapping. Then there's things like metal treatments and other coatings on things, adoption of variable cam stuff, and a bunch of other little improvements that mean it has to be a better thing than the RB26. But I otherwise agree with you that it is approximately the same thing as a 26. But, skip forward another 10 years from that engine and then the things that I mentioned in previous post come out to play. High compression, massively sophisticated computers, direct injection, clever measuring sensors, etc etc. They are the real difference between trying to make big power with a 26 and trying to make big power with a S/B50/54 (or whatever the preferred BMW engine of the week is).
    • Is the RB26 actually that far off the mark? Honestly from where I'm sitting a VR38DETT is not actually that much more advanced than the RB26. Yes, there is a scavenge pump on the VR38, it's smarter in a number of ways but it's not actually jumping out to me as alien technology. Something like a B58 or V35A-FTS on the other hand has so many surprising little design features that add up to be something that just isn't comparable. 
    • https://www.carsales.com.au/cars/details/2021-nissan-skyline-400r-auto-rv37/SSE-AD-17857548/ Well there you go 
    • Chris won't reply. He doesn't visit the forum much anymore. You can try these guys https://www.facebook.com/autotainment/ They did mine many years ago
×
×
  • Create New...