Jump to content
SAU Community

Advan/yokohama Trackday - Winton

R31Nismoid

By R31Nismoid,
in Archived Events

 Share

Recommended Posts

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Advan/Yokohama are doing a trackday @ Winton as per below.

There is a discounted entry on offer if you are running ADVAN Tyres and also you can go into the NEOVA cup which you can win some cool stuff through.

When: 3rd August

Where: Winton Raceway

Further Detail:

Yokohama is holding two track days for time attack competitors, track day enthusiasts and high performance car owners who have Yokohama ADVAN race tyres (A050, A048 and AD08/R).
Entrants can preview and test the new ADVAN Neova AD08R tyre, arriving through July and August. They can also put down a lap time for the ADVAN Neova Cup 2013 leader board.
There will be a tyre expert on hand to pyro your tyres, to see how well you’re using them, and help you set the right pressures.

Link to the website with more details: http://www.yokohama.com.au/en/ADVAN-Motorsport/ADVAN-Neova-Cup/ADVAN-Track-Days.aspx

I'll attach a flier when i get a smaller version to post.

Enjoy!

Link to comment
https://www.sau.com.au/forums/topic/428446-advanyokohama-trackday-winton/
Share on other sites
  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

emts
emts

Natsoft fails to mention: freezing track richo on Streets, next few cars all on semis oh and duct tape makes aero better!

chilliii
chilliii

Nice video's! I gotta learn how to add the tacho animation. Here's a couple of vids of mine.

Posted Images

R31Nismoid Grand Master

R31Nismoid

Posted
  • Author
Posted

Don't be too fast to complain about the price - it's about right. And only taking into account the Yoko Discount price (as thats the entire point behind it)...

It's on a Saturday as well! Costs massively more to hire Winton on a Sat/Sun. Even @ $195 x 55 cars you only just break even :thumbsup:

If spots are capped to 50-55 cars that's a LOT of track time as opposed to loading with 65-70 cars.

Add to that - you can win free entries to WTAC and also Trophies.

Not bad for a 'Trackday' TBH.

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dylannn
      WTB RB25 Gearbox NSW / central west

      By Dylannn · Posted

      Gday   on the hunt for an rb25 gearbox and clutch to go into my R32 rb25/30 build happy to travel a bit or pay for freight for the right one From my limited research, think I need an rb25 driveshaft yoke to make it fit so I’m after one of those too located Bathurst
    • MBS206
      R33 nismo cluster

      By MBS206 · Posted

      Common for single gauges to be swapped around. My 33 GTST when I bought it had a GTR tacho fitted, everything else was GTST gauges.
    • MBS206
      gauge needle removal

      By MBS206 · Posted

      Google says for a 1998 Nissan Maxima to pull/pry, and the metal pin might even come out with it. I'd do a bit more googling, there was a few videos, find some where the shafts/needles appear most similar and compare the techniques.
    • Predator1
      FS - RB30 Turbo upgrade bolton turbo kit - 600kw

      By Predator1 · Posted

      Details: Turbo Borg Warner EFR 9180 with 1.05 rear housing Upgraded TurboSmart integrated BOV Sanded and powdercoated compressor cover in gloss black Elbow welded with wiggins clamp Speed Sensor(Not included) (Can include oil drain(heat wrapped + titanium intake pipe with almost new filter for a tad extra). Manifold: 6 Boost RB26/30 twin scroll manifold  e-MAP ports drilled into both scrolls(I was using the TAARKS EMAP KIT) Turbo is in excellent condition. Always used Penrite 15w50 Racing oil(Changed less then 2000ks). Also using the Turbosmart OP regulator and filter. Downpipe: 4inch Stainless steel with VBand inlet and outlet clamps(included) Heat wrapped Dual ports for Dyno/Wideband usage Will throw in free 2.5 inch intercooler pipe(2.5inch From turbo outlet to 3.5 inch intercooler) - Powder coated black. Turbo made 563rwkw on mainline hub dyno at around 24-25psi boost - Pump fuel. Will def make over 600kw on e85. Didn't bother as my e-MAP was through the roof with my setup sitting past the choke line. I have a cnc ported and fully built head on my 3.2. Turbine speed saw max of around 109k rpm. I'm running this on my R32 GTR, with AC, and the original power steering pump. The manifold clears the AC lines, ABS, and everything else. Although I had new AC lines because I just wanted new ones and I heat wrapped them as well. This will make more power on a slightly lower capacity motor with a higher PR. And I have since upgraded to a G45-1500. Have pics and videos if need be.  Absolutely nothing wrong with setup. Turbo is in perfect condition. No shaft play or oil leaks at all. All the work was professionally done. The transient response of this is fkn amazing. I cannot rave more about this turbo. If I wasn't chasing 4 figures, I would have kept it. $5000 NZ. Located: Auckland, New Zealand.    
    • PranK
      ATCC Amaroo Park 1987

      By PranK · Posted

      I particularly like the look of the John Player Special team. (Thumbnail isn't different but hit play for the clip)  
×
×
  • Create New...