Jump to content
SAU Community

Recommended Posts

I've tried to convince her to do rest and rehab before...the best I could get was her doing light weights and slowly building up again...which isn't always bad but relies a lot on the lifter to judge if they are doing more harm than good based on their body's feedback.

leesh you need to sort that back out. Shouldn't mean you do nothing but, you need to bring it up to spec. so you can move forward with gains and ensure you don't end up with a chronic injury.

Should be OK to keep the intensity up for workouts(so you enjoy something) just need to blank out some of the movements that load up the muscles causing spasms (allow them to release).then retrain the balance between the hip and back etc.

How do you go with 'good mornings' with this injury? Eventually you may want to get back into those to train the back into a strong position. Initially it might not be a good idea till things are settled.

There are some hip mobility tests, also some movements to gethings right again. I'm sure there are some YouTube vids , will have a look for you.

At the end of the day I hope you can look forward to pain free and stronger future. without missing out on a good workout in the mean time (even if its a different workout from today)

Yes I know I need to sort my back out, it's just expensive. The physio helped; did dry needling and taping but it's $75 a visit.

I blanked out deadlifts as soon as I was injured, haven't done them for six months. I can do good mornings with an empty bar okay. I was doing good mornings when I was first injured at my previous gym, as they were recommended to me.

I hope I can look forward to a pain free and stronger future too. Things like putting my shoes on in the morning and getting into the car are extremely difficult and overall affects my way of life.

The reason why I haven't stopped gym is because it's one of the few things I have left. I gave up all the things I enjoyed back home, my job that I loved, and my family and friends to move to Victoria. I've also recently been through the worst experience of my life, which has led to depression amongst other things, all whilst being away from home. So yes whilst I'm in a lot of pain, going to the gym is one of the only things at the moment that makes me feel less shit about myself and my life right now.

Edited by L33SH

without getting to involved as I don't know your situation. Hope you get it all sorted soon and are taking the appropriate measures/steps to a better brighter future

Thanks, apparently I am... just doesn't feel like it right now. I feel like everything I knew about myself has been taken away from me.

  • Like 1

You must have some guns now Leesh that's pretty heavy curling bro :)

Guns are a lot easier to develop on a male I feel :( I'd love to have that bicep muscle separation but my arm is the same size from the shoulder to elbow, not sure what else I should be doing to develop the definition there. My lats are looking better lately though which is good considering I can't deadlift.

Great back development Leesh,looking good!

You have tricep development there for sure, no small feat. Guns arent easy to develop, ask the mass of gym-bros who don't have big guns but, try hard for years....

Guns are actually not about curls or isolation work. Bigger arms go in proportion to other muscle growth and size. See heaps of people train biceps, go nowhere. Your other compound stuff does the job and its keeping it all proportional.

Having said that doing the curls at those weights ,you know you have some decent muscles there. Can't move the iron without it :)

Great job!

Edited by rev210
  • Like 1

The humorous thing is that she was curling what the underdeveloped guys nearby were...I felt like telling them to put some 20s on their barbells and pick them up off the floor, but I think Leesh out-curling them a couple metres away was enough to make them reevaluate or at least assume she was on the gear...

We rarely do biceps in isolation. Pullups and deads (when she can do them) do most of the work for us. But while she's off the back stuff, it's not bad to keep things activated and isolation does do a small amount for growth even if it's limited by the rest of the body's muscle.

Focus right now is on increasing those pull-up numbers, keeping the squats out of back hurting territory, getting her bench up to 60kg and repairing the back so we can slowly reintroduce back rows and deads.

I do hope the pic above is an example of what I mean when I say a female's view on self image should often be taken with a grain of salt. There are teenage girls who would kill to look like that IMO.

  • Like 2

I do hope the pic above is an example of what I mean when I say a female's view on self image should often be taken with a grain of salt. There are teenage girls who would kill to look like that IMO.

I did say in my earlier post that my lats are looking better. The only part of my body that I'm not happy with at the moment is my abs. I'm carrying a bit too much excess fat around my stomach, and I know there are some reasons as to why this is. The fact that I do zero cardio may also be contributing.

There may be teenage girls who want to look like I do.... They should consistently eat a lot of food, with limited fats, then eat more, then eat a bit more, consume around 150g of protein a day and lift heavy weights ;)

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Very nice - I also have a 92 GTST and hardly see any others around these days
    • When I need something else to edit, I use Movavi. A friend who does video editing on a daily basis recommended me) it's an easy video cutter to use for beginners
    • I need to edit some videos for work but I'm not good at all this. Which video editor can you recommend?
    • I think you're really missing the point. The spec is just the minimum spec that the fuel has to meet. The additive packages can, and do, go above that minimum if the fuel brand feels they need/want to. And so you get BP Ultimate or Shell Ultra (or whatever they call it) making promises to clean your engine better than the standard stuff....simply because they do actually put better additive packages in there. They do not waste special sauce on the plebian fuel if they can avoid it. I didn't say "energy density". I just said "density". That's right, the specific gravity (if you want to use a really shit old imperial description for mass per unit volume). The density being higher indicates a number of things, from reduces oxygen content, to increased numbers of double bonds or cyclic components. That then just happens to flow on to the calorific value on a volume basis being correspondingly higher. The calorific value on a mass basis barely changes, because almost all hydrocarbon materials have a very similar CV per kg. But whatever - the end result is that you do get a bit more energy per litre, which helps to offset some of the sting of the massive price bump over 91. I can go you one better than "I used to work at a fuel station". I had uni lecturers who worked at the Pt Stanvac refinery (at the time they were lecturing, as industry specialist lecturers) who were quite candid about the business. And granted, that was 30+ years ago, and you might note that I have stated above that I think the industry has since collected together near the bottom (quite like ISPs, when you think about it). Oh, did I mention that I am quite literally a combustion engineer? I'm designing (well, actually, trying to avoid designing and trying to make the junior engineer do it) a heavy fuel oil firing system for a cement plant in fricking Iraq, this week. Last week it was natural gas fired this-that. The week before it was LPG fired anode furnaces for a copper smelter (well, the burners for them, not the actual furnaces, which are just big dumb steel). I'm kinda all over fuels.
    • Well my freshly rebuilt RB25DET Neo went bang 1000kms in, completely fried big end bearing in cylinder 1 so bad my engine seized. No knocking or oil pressure issue prior to this happening, all happened within less than a second. Had Nitto oil pump, 8L baffled sump, head drain, oil restrictors, the lot put in to prevent me spinning a bearing like i did to need the rebuild. Mechanic that looked after the works has no idea what caused it. Reckoned it may have been bearing clearance wrong in cylinder 1 we have no idea. Machinist who did the work reckoned it was something on the mechanic. Anyway thats between them, i had no part in it, just paid the money Curiosity question, does the oil system on RB’s go sump > oil pump > filter > around engine? If so, if you had a leak on an oil filter relocation plate, say sump > oil pump > filter > LEAK > around engine would this cause a low oil pressure reading if the sensors was before the filter?   TIA
×
×
  • Create New...