Jump to content
SAU Community

Recommended Posts

It was way too low! Scraping the leading edge the whole way around the track.

We modded and lifted it 15mm or so. Just scraps a little under big load.

I went out without the splitter in the first session. Cold, fresh tyres. Did a high 1.35 on the last lap (6). I'd say with that setup it would be a mid 1.34 I'd say. The splitter is amazing under brakes and on loaded turn in. There is much more time in it.

The fastest lap was terrible. With the setup as is, 1.32 no worries.

Still getting used to this no ABS thing. Plus added aero mods.

Video to come. But the fastest lap was well into the session, generally fastest lap is first or second hot lap.

Did i miss it in the thread.....why no ABS? Is it because your still running the non-ABS diff.....or you just decided to go no ABS from now on?

Man its crazy to see all the cars/changes that have happened over the past 3 or so years summed up in a few pages!

Nice work with the win at WInton!

Cheers,

Dave

nice feature!

good to see the test day went well, do did you notice much difference with the splitter off with the front bar all sealed up? or does it need work in conjunction with the splitter?

Did i miss it in the thread.....why no ABS? Is it because your still running the non-ABS diff.....or you just decided to go no ABS from now on?

Man its crazy to see all the cars/changes that have happened over the past 3 or so years summed up in a few pages!

Nice work with the win at WInton!

Cheers,

Dave

Diff is still in pieces, still using brothers non ABS housing diff.

nice feature!

good to see the test day went well, do did you notice much difference with the splitter off with the front bar all sealed up? or does it need work in conjunction with the splitter?

Can't say I felt a difference.

MAD for taking away the ABS ! :)

I read in a jap magazine that the AD08R are the same compound as the AO50...differences are tread compound and the changes required to allow for smaller tread blocks. So should be pretty close to AO50 if setup right

mmm, not sure about that. It's a similar compound, it's not the same. They tyre doesn't go into a marshmallow state once warm like the 50's do.

Mate, 10/10 for effort and commitment!

Couldn't believe it when I read 'then this happened'... for the 2nd time and then you tagged the wall again! But hats off to ya and clearly paying off.

Car is looking pretty good and getting very serious. Get as much power out of that donk as you can as it makes a big difference at EC as you know!

Good luck at WTAC :)

It was way too low! Scraping the leading edge the whole way around the track.

We modded and lifted it 15mm or so. Just scraps a little under big load.

I went out without the splitter in the first session. Cold, fresh tyres. Did a high 1.35 on the last lap (6). I'd say with that setup it would be a mid 1.34 I'd say. The splitter is amazing under brakes and on loaded turn in. There is much more time in it.

The fastest lap was terrible. With the setup as is, 1.32 no worries.

Still getting used to this no ABS thing. Plus added aero mods.

Video to come. But the fastest lap was well into the session, generally fastest lap is first or second hot lap.

any sign of said vid?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm not up to date on the latest, but for basic modifications like pod filter, lower springs etc you can get a modification permit at the time of inspection.  For more serious modifications you will need engineering.  Intercoolers used to fall into the mod permit rule but its been a long while since i looked it up.   Either way you will be able to get it registered, just a case of $300 vs $3k . 
    • Hi everyone! I’m the new owner of a 1996 R33 GTS-T, I’ve purchased this car over from Queensland and brought it to Western Australia and I’ve found that there is a hole cut out in the engine bay for the FMIC that enters into the wheel well (fender liners are in the boot). For anyone that has had to get their car over the PITS here, will this be a major issue?   
    • Yeah I've spotted this one too, whenever it's lotto superdraw week and I'm browsing car sales dot com for my new ride They must be dreaming, maybe it's worth 150k for the link to Brock?
    • 100% accurate!  We are a pack of know it alls....  But, I bet people go to you when they have a problem! I've been on a bit of a clean up rampage too over the past month!  I've thrown more shit in the bin over the past 2 weeks than I have in the past 3 years combined! Anyway, it's all good fun being different! My wife sometimes does not agree!  
    • ADHD in all form isn't about "can focus, or can't focus" or is hyper active or isn't etc.   It's all a dysregulation. Either time feels to be stationary, or time just vanishes in a split second. We are either under focussed on the task at hand (as we're over focussed on our surroundings) or we have no idea an atomic bomb went off beside us as we're so hyper focussed and locked in on things.   Not to mention the rapid fire thought process. What it takes a "normal" process to think up a solution to a problem, ADHD will be able to give you 5 different ways to solve the problem, and the pros and cons of each. While we can be highly impulsive and lack the ability to "control ourselves" we can also become paralysed with the inability to make a decision for ourselves. While most of us have an OCD like requirement for perfection, we lack the ability often to remain focussed to get things to a perfect state. Those with undiagnosed ADHD as adults, can often find the last part actually stops them ever attempting to do things that they have the ability to do, as the reasoning is often "if I can't do it perfectly, it's not worth doing"   As for projects... Ha ha ha, I still need to take the other half of my wall trim down in the Fiance's office so I can paint it. Need to finish digging and running the back yard drains, my R33, getting the Ninja bike registered (now being sold), the moped project, fixing either of the lawn mowers so they're reliable, along with a myriad of other things.   It's why I've been going through lately and just being brutal and clearing projects off that I won't actually ever complete. IE, moped will go to the tip, or be given away, bike is being sold, Subaru project being sold, some parts for other projects given away. Or I've been making myself focus on one thing at a time, by ticking off the smallest quickest ones first.   There's also a reason by our mid twenties we seem to be "know it alls", as we've all been down some of the weirdest and oddest rabbit holes when you follow the dopamine trail. It's often also why we're more a jack of all trades, but not a master of one.   However, pretty much all of my hobby projects, in one way or another, all come back around to automotive. That's my zen area.
×
×
  • Create New...