Jump to content
SAU Community

Recommended Posts

  • 2 months later...

Power doesn't seem to over the top

which makes me wonder why others with similar tyres dont have this much of an issue.

makes me wonder about the things I suggested, but also the engine set-up and where peak boost/torque is at. (stock cams, unlike other modified cars so peak figures arent pushed further back into the rev range. ie too much down low, potentially?)

which makes me wonder why others with similar tyres dont have this much of an issue.

makes me wonder about the things I suggested, but also the engine set-up and where peak boost/torque is at. (stock cams, unlike other modified cars so peak figures arent pushed further back into the rev range. ie too much down low, potentially?)

On the AD08 there is a fine ballance of where you want the torque to come on. As the tyre doesn't like shock loading.

  • 3 months later...
  • 3 weeks later...
On 16 July 2016 at 10:32 PM, AMR33 said:

What's happening with this?

Making some changes so that it can be log booked under 3D sports sedans.

- removing the ignition barrel (steering lock)

- wire in push button start

- remote battery isolator

- improve the cooling (oil and water)

image.jpeg

  • Like 2
8 hours ago, fatz said:

Have not red the rules but I am impressed with what you can do in this clubs print class 

great read as well

It's you to be good to put some sticky tyres in and see how it goes.

Hey, how did you fit 10" wheels under the guard if you don't mind? Did you have to limit the amount of steering lock so that the wheel wouldn't hit the control arm? It doesn't seem to poke out of the guards at all.

Edited by TyresBro
On 8 August 2016 at 3:19 AM, TyresBro said:

Hey, how did you fit 10" wheels under the guard if you don't mind? Did you have to limit the amount of steering lock so that the wheel wouldn't hit the control arm? It doesn't seem to poke out of the guards at all.

It's a 10 + 38 with a 15mm spacer. The tyre gets close to the body and the arm but doesn't touch.

The guards front and rear are rolled flat.

  • Like 1
  • 1 month later...
On 17/07/2013 at 8:25 AM, ssxRicho said:

front castor -7 deg

front camber -3 deg

front tow +0.8mm (ea)

rear camber -1.7 deg

rear tow -0.5 (ea)

The camber settings change a little as we lift the front and rear regularly to find balance for the conditions. This also changes the tow slightly, though not much with the R33 arms.

I haven't got any adjustable arms on the rear, so the standard camber bolts are pushed all the way to max positive.

Wheel alignment settings go together with the spring choice, sway-bar setup, rake etc.

So from what I can see you just have Cusco upper adjustable arms and running -3 degree camber... Anything I've missed? How do the front tyre shoulders fair at -3?

 

On 25/09/2016 at 1:13 PM, Tangles01 said:

So from what I can see you just have Cusco upper adjustable arms and running -3 degree camber... Anything I've missed? How do the front tyre shoulders fair at -3?

 

They are ok at -3, the outside temps get 10 or so degrees higher than the inside. If you can, run 3.5-4.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • He made that comment in my thread - In my case the vents ARE to lower engine heat, when the car is not moving, which is the only scenario I have heat problems with the aircon on, sitting in traffic, on 40C+ days. I can't imagine a scenario that this NC needs any at this point in time. I do not know if it will actually make my cooling when the car is MOVING worse, and I sincerely hope that won't be the case. If it does, well, um, f**k.
    • Nice, thanks. Thats why I was asking, there'd been a fair bit of discussion in the E90 world about vents and where it makes sense to put one (ie, over the filters is not great as that is inline or slightly behind the struts and in higher pressure area). I struggle with air flow and pressures. It sill weirds me out that a radiator in the boot can work. 
    • Neither really Vents, when located in the right place, will lower the engine bay "pressure", as air has a path to escape, thus lowering the engine bay pressure, thus.....improving the efficiency on the coolant stack (read: IC, condenser, radiator) This is why the Blits vented bonnet on my 33 worked so well, the vent was in the front 1/3 of the bonnet, which put it right after the radiator  If the vents are to far back toward the windscreen, which is a high pressure zone, it can actually force air into the engine bay, causing higher pressure and effectively loosing efficiency on the cooling stack, like the fab of raising the rear of the bonnet, which does allow heat to escape, but only when the car isn't moving  There's heaps of cool "fluid dynamics" info out there, but, I'll attach a video of a 'Merican joint that focuses on "Miatas" as I found it when looking into vents for mine, they explain it way better than me  
    • Poor bleeding. That stupid damping loop in the plumbing that should be completely replaced with a braided hose. Just the first 2 that come to mind.
    • Forgive the potentially silly question but are the vents for bay temps? I've been toying with how to reduce my bay temps because man, it gets HOT in there and a small subtle vent somewhere I think might help. Or, maybe they're to assist with just the intake temps? 
×
×
  • Create New...