Jump to content
SAU Community

Recommended Posts

So, in all likeliness I shall be selling my R34 GTV.

I got rear ended on Manningham Rd on the way to Doncaster by a 96 pathfinder (i think it looks to small to be a patrol).

Left most of the rear end crushed. Bootlid, both lights (one looks ok but isn't working), rear bar obviously, through the reo and into the rear panel, exhaust looks like it has shifted a bit too.

To top it all off, he's uninsured, and my 3rd party only covers me for $3k.

SO! I think it's time to sell for me.

It doesn't look like it'll be ridden off, so whoever buys it won't have to worry about getting it checked out before putting it back on the road.

Has ~80-90k on the clock. 2001. And the gearbox is stuffed, auto, shifting like a horse kick occasionally, been having that problem for a while and haven't been able to fix it after spending some money with a "transmission specialist".

What I want is just ideas on how much people think it'd be worth in that condition. Obviously it still actually drives, but it wouldn't be roadworthy.

I was thinking about the $8k mark.

Thanks, and with terrible regret,

Teiresias.

Link to comment
https://www.sau.com.au/forums/topic/428540-end-of-a-short-era/
Share on other sites

No way you'll get $8k for your 'bent' 34 especially when people are selling undamaged auto turbo 34 at this price.

You might get couple of grand at most. Or wreck it out, you might get more $ that way.

No way you'll get $8k for your 'bent' 34 especially when people are selling undamaged auto turbo 34 at this price.

You might get couple of grand at most. Or wreck it out, you might get more $ that way.

Uhh... The series two GTVs tend to be more expensive then most of the 25GT-Ts you see around... Sure $8k might be shooting too high but when it wasn't 'bent' it was worth around the $14k mark.

Unfortunately there's none on carsales at the moment to get a starting full price from :-/

In the end of the day, it's only a N/A auto and no way I'd pay 'p-plater tax' these n/a imports are commanding let alone bent one.

You're better off parting it out, there is money to be had on brakes, LSD, and probably other bits (depending on how modified yours are).

Buying it at 8k and pay a few thousands to fix it, you can probably get a manual GTV for that much lol :S

Not to mention the gearbox is stuffed?...

Ok, $7k then? No reason you couldn't drop a manual box into it and they're at around the $250 mark last time I checked (second hand ofc)

8K?! You should team up with the guy selling the 17" tommy kaira wheels

Dude the only GTV on carsales is $17k, now I think that's at least $3k over realistic. Now lets say a GTV worth $14k - ~$6K worth of damage on the rear end (waiting on what the panel beater says exactly) and the gealbox -$1k, $7k doesn't seem unreasonable.

Dude the only GTV on carsales is $17k, now I think that's at least $3k over realistic. Now lets say a GTV worth $14k - ~$6K worth of damage on the rear end (waiting on what the panel beater says exactly) and the gealbox -$1k, $7k doesn't seem unreasonable.

Yes it does.

Why would you spend 14k on purchasing and repairing a stuffed one when you can buy a complete one for the same amount, without the headaches?

You will not get $7k for a crashed na auto 34. There is no need to be upset

Part it out and you'll decent get cash for it. It's the best option. I understand your dismay at your car being crushed and then people coming and telling you it isn't worth much. Unfortunately your vehicle, while it may be a gtv, is automatic and non turbo. This is not an ideal vehicle for people who have 14k to spend.

Goodluck with your sale

  • Like 1

Yea. Sorry. Bit frustrated with it all. Work has cut my hours to something like 3 hours a fortnight and this bastard just has to come along and seal the deal.

By the sound of it all it's not even worth selling it, but repairing it instead. I'm reluctant to do so, I don't even know if I'll get anything off this son of a bitch but yea.

Just out of curiosity, since this guy isn't insured and I'm assuming you have all the details and he's not a complete a$$hole, why is he not fixing what he has damaged?

If he doesn't want to pay, you have all the legal bits to go through, however I'm fairly sure in Victoria if you're hit up the backside in safe driving conditions it's the other driver's fault. Were you doing something you shouldn't have? Forced your way into another lane and stopped suddenly or something?

If that's the case and it's your fault fair enough with what you're doing, but otherwise I'd be going and getting a few quotes to fix the car from reputable workshops and hand him one that's reasonable and tell him to pay for repairs - then sell your car if you've had enough.

Also, as others have said, not worth 7-8k regardless in current state, once a car has had a decent hit and you're suggesting the rear end may be somewhat twisted, even if you fix it up to how it was, it has that history, more chances of weak spots, welding replacement body parts on possibly, not driving straight, doors being a bit harder to open/close, etc.

Good luck with it, do feel for ya.

Just out of curiosity, since this guy isn't insured and I'm assuming you have all the details and he's not a complete a$$hole, why is he not fixing what he has damaged?

If he doesn't want to pay, you have all the legal bits to go through, however I'm fairly sure in Victoria if you're hit up the backside in safe driving conditions it's the other driver's fault. Were you doing something you shouldn't have? Forced your way into another lane and stopped suddenly or something?

If that's the case and it's your fault fair enough with what you're doing, but otherwise I'd be going and getting a few quotes to fix the car from reputable workshops and hand him one that's reasonable and tell him to pay for repairs - then sell your car if you've had enough.

Also, as others have said, not worth 7-8k regardless in current state, once a car has had a decent hit and you're suggesting the rear end may be somewhat twisted, even if you fix it up to how it was, it has that history, more chances of weak spots, welding replacement body parts on possibly, not driving straight, doors being a bit harder to open/close, etc.

Good luck with it, do feel for ya.

It's 100% his fault, I was slowing down as there was an accident on the other side of the intersection, I had almost come to a stop at the lights, but took my time slowing down, it was a good 5 seconds after I was slowing that he hit me, hadn't even indicated yet to go into another lane.

Yea he gave me his ID, but I'm actually suspicious of it all, his name on the license is different to the name he gave me when he got out of the car, and the name of the email address he gave me. Also he is on his Ps (according to the license he gave me) and didn't have plates up.

So I'm a bit concerned and preparing for the worst. Brought it to the panel beaters yesterday so I'll find out early next week.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Have you put an aftermarket oil pressure gauge on and verified your oil pressure?   Noise being on the block, on exhaust side, how high up the block does it seem to be? It could be the VCT system getting cranky, especially if it's mainly at idle, and when warm, as that'll be your lowest point for oil pressure. Could be showing that oil passages / VCT solenoid are blocking.
    • Well, hydraulic lifters will get noisy if they are dirty/fouled in some way, and exactly how that manifests will depend on exactly what schmutz is where. There is a procedure on here somewhere for dismantling and soaking/cleaning them. Replacing them with new is about 50% of the work and about 5% of the money!
    • Thanks for the reply @GTSBoy this is is a hydraulic lifter engine. Yea right i did not realise the lifters were supposed to be compressible while installed. I could push them down but i had to lean almost my while body weight on them.  I have never heard of a lifter/ lifters ticking only at hot idle and getting worse the hotter it gets. I have owned a few jdm cars with noisy lifters. This noise is slightly more subtle, it is more of a sharp gentle metalic tic than the solid and more loud tapping I've heard on lifters. I have used a metal rod, alloy tube, hose and stethoscope and could not find the source of the tick. But it appears to be loudest on the actual engine block behind the exhaust cam gear and next to the oil filter. I had mate (40 year old mechanic) go over it with me and he couldn't find it either..  Could it be a cam seal issue of some sort?  Cheers  
    • This seems problematic and unlikely at the same time. Vanilla RB2Xs have hydraulic lifters. They do have "zero" clearance, but only when running with oil pressure inside them. When not running, you should be able to compress them and obtain heaps of clearance. RB26s and Neos have solid lifters. They should have ~0.3mm and ~0.5mm on the inlet and exhaust respectively. If they have zero clearance then bad things are happening. With nothing else being wrong, it would mean that the valves would be held slightly (ever so slightly) open when they are supposed to be closed and it should have all sorts of problems when running, caused by leakage in/out through the valves. Or, zero clearance can indicate severe valve seat recession. None of it is good. Have you used a piece of hose as a stethoscope to try to localise the noise?  
×
×
  • Create New...