Jump to content
SAU Community

Recommended Posts

So, in all likeliness I shall be selling my R34 GTV.

I got rear ended on Manningham Rd on the way to Doncaster by a 96 pathfinder (i think it looks to small to be a patrol).

Left most of the rear end crushed. Bootlid, both lights (one looks ok but isn't working), rear bar obviously, through the reo and into the rear panel, exhaust looks like it has shifted a bit too.

To top it all off, he's uninsured, and my 3rd party only covers me for $3k.

SO! I think it's time to sell for me.

It doesn't look like it'll be ridden off, so whoever buys it won't have to worry about getting it checked out before putting it back on the road.

Has ~80-90k on the clock. 2001. And the gearbox is stuffed, auto, shifting like a horse kick occasionally, been having that problem for a while and haven't been able to fix it after spending some money with a "transmission specialist".

What I want is just ideas on how much people think it'd be worth in that condition. Obviously it still actually drives, but it wouldn't be roadworthy.

I was thinking about the $8k mark.

Thanks, and with terrible regret,

Teiresias.

Link to comment
https://www.sau.com.au/forums/topic/428540-end-of-a-short-era/
Share on other sites

No way you'll get $8k for your 'bent' 34 especially when people are selling undamaged auto turbo 34 at this price.

You might get couple of grand at most. Or wreck it out, you might get more $ that way.

No way you'll get $8k for your 'bent' 34 especially when people are selling undamaged auto turbo 34 at this price.

You might get couple of grand at most. Or wreck it out, you might get more $ that way.

Uhh... The series two GTVs tend to be more expensive then most of the 25GT-Ts you see around... Sure $8k might be shooting too high but when it wasn't 'bent' it was worth around the $14k mark.

Unfortunately there's none on carsales at the moment to get a starting full price from :-/

In the end of the day, it's only a N/A auto and no way I'd pay 'p-plater tax' these n/a imports are commanding let alone bent one.

You're better off parting it out, there is money to be had on brakes, LSD, and probably other bits (depending on how modified yours are).

Buying it at 8k and pay a few thousands to fix it, you can probably get a manual GTV for that much lol :S

Not to mention the gearbox is stuffed?...

Ok, $7k then? No reason you couldn't drop a manual box into it and they're at around the $250 mark last time I checked (second hand ofc)

8K?! You should team up with the guy selling the 17" tommy kaira wheels

Dude the only GTV on carsales is $17k, now I think that's at least $3k over realistic. Now lets say a GTV worth $14k - ~$6K worth of damage on the rear end (waiting on what the panel beater says exactly) and the gealbox -$1k, $7k doesn't seem unreasonable.

Dude the only GTV on carsales is $17k, now I think that's at least $3k over realistic. Now lets say a GTV worth $14k - ~$6K worth of damage on the rear end (waiting on what the panel beater says exactly) and the gealbox -$1k, $7k doesn't seem unreasonable.

Yes it does.

Why would you spend 14k on purchasing and repairing a stuffed one when you can buy a complete one for the same amount, without the headaches?

You will not get $7k for a crashed na auto 34. There is no need to be upset

Part it out and you'll decent get cash for it. It's the best option. I understand your dismay at your car being crushed and then people coming and telling you it isn't worth much. Unfortunately your vehicle, while it may be a gtv, is automatic and non turbo. This is not an ideal vehicle for people who have 14k to spend.

Goodluck with your sale

  • Like 1

Yea. Sorry. Bit frustrated with it all. Work has cut my hours to something like 3 hours a fortnight and this bastard just has to come along and seal the deal.

By the sound of it all it's not even worth selling it, but repairing it instead. I'm reluctant to do so, I don't even know if I'll get anything off this son of a bitch but yea.

Just out of curiosity, since this guy isn't insured and I'm assuming you have all the details and he's not a complete a$$hole, why is he not fixing what he has damaged?

If he doesn't want to pay, you have all the legal bits to go through, however I'm fairly sure in Victoria if you're hit up the backside in safe driving conditions it's the other driver's fault. Were you doing something you shouldn't have? Forced your way into another lane and stopped suddenly or something?

If that's the case and it's your fault fair enough with what you're doing, but otherwise I'd be going and getting a few quotes to fix the car from reputable workshops and hand him one that's reasonable and tell him to pay for repairs - then sell your car if you've had enough.

Also, as others have said, not worth 7-8k regardless in current state, once a car has had a decent hit and you're suggesting the rear end may be somewhat twisted, even if you fix it up to how it was, it has that history, more chances of weak spots, welding replacement body parts on possibly, not driving straight, doors being a bit harder to open/close, etc.

Good luck with it, do feel for ya.

Just out of curiosity, since this guy isn't insured and I'm assuming you have all the details and he's not a complete a$$hole, why is he not fixing what he has damaged?

If he doesn't want to pay, you have all the legal bits to go through, however I'm fairly sure in Victoria if you're hit up the backside in safe driving conditions it's the other driver's fault. Were you doing something you shouldn't have? Forced your way into another lane and stopped suddenly or something?

If that's the case and it's your fault fair enough with what you're doing, but otherwise I'd be going and getting a few quotes to fix the car from reputable workshops and hand him one that's reasonable and tell him to pay for repairs - then sell your car if you've had enough.

Also, as others have said, not worth 7-8k regardless in current state, once a car has had a decent hit and you're suggesting the rear end may be somewhat twisted, even if you fix it up to how it was, it has that history, more chances of weak spots, welding replacement body parts on possibly, not driving straight, doors being a bit harder to open/close, etc.

Good luck with it, do feel for ya.

It's 100% his fault, I was slowing down as there was an accident on the other side of the intersection, I had almost come to a stop at the lights, but took my time slowing down, it was a good 5 seconds after I was slowing that he hit me, hadn't even indicated yet to go into another lane.

Yea he gave me his ID, but I'm actually suspicious of it all, his name on the license is different to the name he gave me when he got out of the car, and the name of the email address he gave me. Also he is on his Ps (according to the license he gave me) and didn't have plates up.

So I'm a bit concerned and preparing for the worst. Brought it to the panel beaters yesterday so I'll find out early next week.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi All, New member here, I've joined to help my son with an issue that is truly doing our heads in. I'll start with a bit of an overview. Chris carried out some modifications to the engine to try and extract just a little extra power out of the motor and make it a bit more efficient. Previous to this work, the car already had an upgraded exhaust, increased boost up to 14psi, modified standard turbo to metal impellers and slightly oversized, upgraded fuel pump, been dyno-tuned at JEM, and some other bits n bobs like coil packs etc. Before the current mods it was making 236rwkw at 14psi but after the new mods it now makes 209rwkw at 14psi. The work he carried out is as follows, timing belt service, water pump replacement, return to sump radium catch can, had oem head rebuilt and machined 0.2mm, fitted Athena cut ring head gasket 1.2mm thick, arp 2000 head studs, added rear prp head drain, added an external wastegate 40mm turbosmart welded off the stock manifold and plumbed back into a 3in dump. The car has been on the dyno and apparently the ignition is working, fuel flow and fuel pressure is fine, injectors are fine, spark plugs are working fine, Maf is working, O2 sensor is working, TPs sensor is working, VCT is working, CAS is working, boost leak test showed no boost leaks, compression test first crank cold 135psi and got to 150psi across all cylinders once cranking, timing is confirmed at tdc with a dial gauge and the cam dots line up, no blockages in intercoolerm throttle body or pre-turbo intake, no blockages in exhaust, cat conveter or down pipe, turbo looks fine and spins and wastegate looks fine and is new. Soz for all the detail but after all this, it has been in 3 times for dyno and each time comes back stating it's not going to make power. After the first (or second, can't remember now) trip to dyno we did find the timing out by one tooth and this improved things, but it is still well down. Does anyone have any ideas?  Any replies much appreciated as we're just not sure of which direction to take this. Regards Rob (Chris's Dad).
    • That's just a gauge, with a certain amount of electronic damping, and no-one cares if it is timely-accurate. I'd hesitate to use it for an ECU MAP input without knowing that it was a nice signal. Responsive but smooth. Not laggy. Not lumpy.
    • Took the dirty BMW to an actual drag meet so I could do a legit full pass on a sticky enough track and had a quiet goal to try and beat my PB in the old R33 GTS25t The time to beat:  R33 on stock RB25, Internal gate GT3076R on stock manifold tuned to about 17psi on BP98 and running on drag tyres: F20 M135i with intake, dump pipe and MHD OTS Stage 1 tune on street tyres - didn't even drop the tyre pressure: Kinda similar, and kinda way different
    • Isn't there a fitting on the back of the balance tube? That's what the OEM boost gauge uses.
    • Getting a decent signal from all 6 throats is a challenge. I don't know for sure, but I suspect that the stock balance tube is not ideal for it. I have done it on an ALFA 4 cylinder (about 35 years ago, so don't ask for too many details). We drilled 4x holes in the manifold runners, put in some fittings and ran hoses to a decent sized (I think it was about 20mm diameter) pipe that ran the length of the inlet manifold. So, it was quite a decent volume. There is a "tuning" balance to be found between the volume of the common plenum on such a thing and the diameter of the pipes running from it to the runners. You need the volume to be large enough to damp out the sharp spikes in pressure signal you get as each runner gets sucked on by its cylinder, but not so large that it becomes too slow to respond to actual changes in MAP. And you need the hoses to be small enough to transmit the signal quickly, but not so small that they delay the signal. You might have to have more than one go at it, if there isn't any actual success based wisdom to be had here. Hopefully there is. Anyway, I would not do it on only a couple of cylinders. I would also not care about "permanently modifying a part". Just bloody drill holes and make stuff better. There is nothing sacred about any GTR unless it is a genuine museum piece that you shouldn't be modifying at all anyway.
×
×
  • Create New...