Jump to content
SAU Community

R32 Gtst 1993 Model Stripping The Lot Unless Get Good Offer.

christian69
 Share

Recommended Posts

christian69 Community Regular

christian69

Posted
Posted

hey guys got a r32 gtst. 1993 model second owner in aus

car has alot of good parts on it.

rb20 stock with 130 thousand ks on it healthy strong motor with gearbox computer turbo loom and a twin plate clutch worth $$$ after 1500 for it all.

gtr genuine bonnet 500$

Gtr genuine grill 150$

Gtr fiberglass bar 300$

Gtr boot and spolier 250$

coil-overs 400 think there Hks there purple?

Nismo cat back exhaust 400$

inter-cooler kit not sure what brand 300$

carbon fibar front guards 150$ each ( wider then gtr )

doors 170$ each

cradle with lsd diff 400$

rear bar 100$

and what ever else you need tex me and ill give you a price.

located in melbourne 0401 906 086

post-58084-0-35136500-1373794121_thumb.jpg

post-58084-0-00313500-1373794153_thumb.jpg

post-58084-0-65557400-1373794163_thumb.jpg

post-58084-0-97929400-1373794341_thumb.jpg

christian69 Community Regular

christian69

Posted
  • Author
Posted

front guard, coilovers, front grill, rear boot and spolier, rear bar , center dash , glove box, tail shaft, indicators ALL SOLD !!!!!!!!!!! still got motor, box, gtr bonnet, gtr front bar, nismo exhaust cat back, full intercooler, doors, front lights, seats, and most of the interior.

IF SOME 1 HAS A DAMAGED R32 AND NEEDS A CUT WILL SELL WHAT YOU NEED :)

christian69 Community Regular

christian69

Posted
  • Author
Posted

still got a fair bit interior left !!!! also got a rb20 with 130ks very healthy with 5speed gearbox and twin plate clutch comes with computer wiring and turbo FULL COMPLETE RUNNING GEAR 1450

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      I just got to work and skimmed through 61508 and 61511. I was surprised the CSA adopted both, but neither are enforced. To recap what I read, it states that in a perfect world, they should be segregated but they acknowledge that this is not industry standard and clearly mention that they allow mixing of safety and non-safety. 61511 also mentions software segregation like AB does in their safety PLC's.   Now if only I could go back to control, let alone safety over comms. In my current line of work, we're only allowed monitoring and basic control over comms. Everything critical must still be hard wired as much as possible. 
    • TurboTapin
      RB25DET Solid lifter conversion

      By TurboTapin · Posted

      I've unfortunately never been as they're on the complete other side of the continent and another country that isn't currently letting us in as easily as they use to. I even heard their stop signs over there actually say "Stop" instead of "Arret". If I decided to trek the 48h drive, I wouldn't know when or where to stop haha. Whenever I order parts from UP Garage, I order from Japan as it's cheaper. Same with GKTech... oddly enough, it's cheaper shipped from Australia then it is the US.  UP Garage Japan operates their US leg though, unlike Tomei. If Tomei JPN had the power to close down Tomei USA, I'm sure it would be done in a day. They're two completely separate entities. Tomei JPN messed up somewhere originally agreeing to its creation and got sacked big time. 
    • KKaplumbaa
      SR20 to cefiro

      By KKaplumbaa · Posted

      I asked someone about this and he told me about the Audi 1.8T engine. But I think it would be difficult to swap
    • MBS206
      The Cool Tools Thread

      By MBS206 · Posted

      I don't know that machine specifically, but I'd personally go for something with a little more kick than 130amp. Around up to 180 would be good. At the 6mm range, you're really pushing the machine hard and don't have a long period you can run for with out needing to give it a rest. Lots of MIG machines come with a regulator and hose. A lot will come with a starter roll of wire too, but it isn't too expensive to buy. I'd recommend NOT buying a massive roll too, as you don't want it sitting around FOREVER in the machine between uses and potentially going to shit. For thin sheet metal, get a roll of 0.6mm if you're doing over 3mm and above, switch over to 0.8mm wire. Even by 2mm you'd probably really want to switch. As for gas battle, it's all swap and go style now. You'll pay a bottle deposit, and then X amount to swap for a full one. I think it's like $200 or $300 for a D Size bottle upfront as "deposit", and like $110 to $150 per swap. My D size CO2/argon bottle lasts a fair bit of welding on the MIG. And I run an E size bottle on the TIG. For DIY MIG, stick with a D size bottle. If you really start to get into a LOT of welding and doing it really regularly, then upgrade. If you're like most DIY car guys, one D bottle will last you 2 or 3 years easily. I think I've been on my current bottle about 5 years. It is starting to get low, but I've been smashing it a lot more the last 6 months.
    • KKaplumbaa
      SR20 to cefiro

      By KKaplumbaa · Posted

      SR20s came with cars like the Bluebird and Primera, but the RB20 never came. The ones in Turkey were either brought in specially or from abroad. That's why RBs aren't as common as SRs. And if a part breaks or I need to replace it when doing maintenance, it's harder to find parts for RBs.
×
×
  • Create New...