Jump to content
SAU Community

Recommended Posts

A few SA SAU members had a run out there today (Sunday 06Jun04) but unfortunately none of us had the best of meets :(

Thanks to all that came to watch and lend support :)

Poor old Matty (MattR) had a PITA intercooler hose that didn't want to stay on no matter what was tried. In the end he retired. Better luck next time mate.

Chapman (Maxx) debuted the new S15 (no muckin' around there mate :D) with a couple of low 14's @ 102+mph. A best of 14.2 was the end result. It's a good starting point mate.

A lesser known forum member (PSI-VL... I think?) ran 11.3 @ 121+mph? Not a Skyline, but still RB powered.

I had a couple of PB's... 12.357 @ 119.96mph (2.119) was a ET PB, and an earlier pass saw a MPH PB of 120.03mph

I'll run an 11 eventually. I'm getting closer. One tenth at a time :D Yes I know, I suck at burnouts!

Link to comment
https://www.sau.com.au/forums/topic/42868-air-off-street-drag-report-06jun04/
Share on other sites

it's good to see Matt, MattR & andrew.

matt is car is SO damn nice, the engine bay is so SHINEY, photo don't do the justice.

the only think i can say is - I CAN"T DRIVE!!

everyone come to me and teach me how to launch the car but i am so stupid...

the best mph is 14.22 with 103.69

the BEST 60' is shocking - "2.5"

the car is a lot harder to launch then previous R33. But maybe it's because i haven't used to the car yet.

hopefully i can run a 13 flat or even high 12 like Andrew some day... before i blow the gearbox :D

Congrats on the time Matt. Atleast ur getting better each time u go!!

So pi***d i couldnt make it!!

My car got blocked into the marion carpark at 11.30 last night!!! Cops didnt leave till 2 am and approx 30 defects later!!!! (They were all comodores though) I was smart enough to leave my car and hide in the plex for 2 hours, so i didnt get done over.

Hopefully next time im more organised and ill make it out!

Don't be too hard on yourself Chappy, it was your first time out in a new car. To run 14.22 at nearly 104mph, with a 'less than perfect launch', shows the car has plenty of potential. Thanks for the photo too mate :D

Thanks Andy/Mark :D Sounds like a close call Mark!

Thanks guys :(

Yeah Robo the top end is fairly solid. I can usually miss a gear or totally stuff the launch (wasting a second or so) and if I keep on it for the rest of run I can chase down a 13-14sec car.

My total lack of a decent burnout saw the Nittos spin in 3rd and 4th on one pass.

A couple of fellow work mates of mine were out at AIR on the June 6th meet and one of them (Adam) took a heap of photos for me! They're bloody excellent 'cause they're from angles I've never got to see before!

Check out the wheel spin marks that my tyres have left on this less than perfect launch:

I didn't think my car lifted up the front end this much either.

mypic29.jpg

No mate, the 540's are still alive and kicking... on the back of Steve's beast :D

My new everyday (& strip) rubber is 275/40/17 Extreme Drag NT555R Nittos. I've had them for a few months almost. They're much better for straight line traction on the street than the 540's. Even around corners they perform better than 'normal' performance road rubber, due to the soft compound.

My total lack of a decent burnout saw the Nittos spin in 3rd and 4th on one pass.

Woeful. Dude, 2nd gear 6krpm, drop clutch, on brakes just enough for it to not roll forward.... You'll be right.

1.6 on the exact same tyres is possible. I personally guarantee it.

Adrian

damm, intercooler pipe:( fixed now and ready for the next wednesday night meeting. my best (if you can call it that) time for the day was 14.020 at 103.65mph. 60ft was a poor 2.8. have to get used to the nittos

Well done Matt and Chapman

Congratulations Matt, glad to see you are getting quicker every time you go out, won't be too long before you get an 11 sec pass.

I had to post this pic, as I actually saw some smoke coming off your tyes :bs!: and didn't think anyone would believe you ....sorry couldn't resist

Mark

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I haven’t taken them out of the cases yet    inside the box is this packaging which is pretty much like a massive blister pack 
    • Purchased a NC MX5 a while ago Basic suspension mods done, BC coils and Whiteline sway bars  New DBA calipers, discs and pads Added some 17 x 8 Konig Decagrams with 215/45 17 PS5's Added some typical NA bolt on's, i.e. full exhaust and intake  Added 0.5ltrs with a MZR2.5 swap, nice bump in torques  Found a detachable hard top which is locked in for a colour match with my local paint shop in Feb 25, this also includes some PDR as it has received a few love taps from parking in the local shops when in the hands of my Minister for War and Finances, me, I park nowhere near other cars and typically park on the street The little thing is awesome, I drive it everywhere, it handles like a dream whether I'm up it or just cruising  But now,  because I'm a idiot, I keep looking at turbo kits....... did I mention I'm a idiot Why is dose so appealing  All of the NA 2.5 glory, well.......until sometime in 2025 anyway....🤪  
    • I would not be surprised if you are the only person on earth that has the interest/desire to do that lol.  The Haltech base map is a really good starting point, the car will fire easily and drive very well, even on mild boost levels. To me, following your advice sounds like some sort of ancient Chinese water torcher lol (this is not an insult Josh, never change <3)
    • Those car show concepts from the 2000's and 2010's like the Floria and IDx were brilliant and should've gone ahead, at least one of them. But neither Honda nor Nissan are thinking about affordable performance any more, which is truly sad.  Even if Toyota's liquid hydrogen ICE development reaches the point where it's commercially viable and the infrastructure to support it, Honda/Nissan would have to wait until Toyota allow fee access to their patents to offer it with any smaller performance models they released to take advantage of it.  
    • A sporty manual RWD coupe with a IL4 Honda engine would only be a good thing I assume we won't see anything released for a few years though, unless informal talks and designs have been going on for a few years,  and due to the current, and future, emmisions and safety requirements, I assume anything "sporty" they would do would be at least some hybrid thingie And hopefully anything they are thinking of has nice lines, without lots of plastic and fake bits hanging off it like that horrendous FK8 that looked like it was designed by a 13 year old The other issue of course in the current market is cost, currently the type R is around $70k, a twin is around $50k Meh, I'm old and grumpy and would rather buy a older model car and waste my coin on that than buying anything currently available new  
×
×
  • Create New...