Jump to content
SAU Community

Recommended Posts

I've been driving more than usual lately, and using more fuel, so I've been taking more than a passing interest in prices.

In particular, while the servos advertise their cheapest price in huge letters, they kind of "forget" to advertise the expensive 95 or 98 octane stuff we actually had to buy.

So, this is a survey of advertised vs actual prices for the fuel we need....feel free to add in this format:

Brand, Location, cheapest price on sign (usually e10 91 octane), 95: margin 98: margin

Interesting to learn that different brands, and even different locations on the same brand charge different margins.

Link to comment
https://www.sau.com.au/forums/topic/428718-servo-margins-for-9598-octane/
Share on other sites

Some data:

BP, Pymble, 91: 142.5, 95: +10c 98: +16c

Shell, Manuka ACT, 91:148.9, 95: n/a 98: +17c

Caltex Concord, 91: 157.9, 95:+13c, 98: +17c

BP Marulan, 91: 157.9, 95: +12c, 98: +18c

Caltex, Majura ACT, 91: 157.9 95: +11c, 98: +15c

I'm really surprised that the Pymble BP is cheaper than the rest. Must be on the cheap day of the week compared to others.

I find that BP is usually at least 5c more than either of the Shell stations on Ryde Rd near Gordon and one in Macquarie Park.

I'd also be interested to see if the PULP 98 fluctuates as much on weekday rates as the e10.

I'm really surprised that the Pymble BP is cheaper than the rest. Must be on the cheap day of the week compared to others.

I find that BP is usually at least 5c more than either of the Shell stations on Ryde Rd near Gordon and one in Macquarie Park.

I'd also be interested to see if the PULP 98 fluctuates as much on weekday rates as the e10.

as the base price(e10) fluctuates, so does the better fuels.
  • Like 1

Guys, the intention of this thread was NOT to talk about the base (91/e10/whatever) price, because I'm sure we all know that goes up and down based on fuel companies' pricing decisions (and sometimes exchange rates, oil prices and wars). Like Luke said:

as the base price(e10) fluctuates, so does the better fuels.

The point is the more often hidden/obscured difference between the base price and the stuff we all have to use. Based on what I've seen so far, I think we will find cheaper brands and/or locations by gathering some proper information.

I like how E85 follows the normal fuel price minus "x" amount. The last time I looked, I'm still paying the same for corn and sugar!

Yep, exactly the same scam really...it's pretty sad, but they will all keep doing this unless we pay attention to the behaviour!

I think it's fair enough to suggest that 7Eleven policies are assisting (somewhat) to keep margins lower through competition.

I would use their 98 in the Foz XT and compare with BP/Shell in the GTR. Depending on what car I was filling at the time, I was either smiling or grumpy.

I'm a little surprised no-one else is interested in collecting data....anyway here are 2 more from this week:

United, Rozelle: 91:148.7, 100:167.7

Caltex, Majura ACT: 91:157.9, 95:168.9

And here are some sample graphs of the data.

fuel1.jpg

fuel2.jpg

Thanks Ian for the link to base prices, here are the numbers for Sydney from that site:

sydney.jpg

What do they say together?

Buying on 98 from BP Marulan on a Saturday (175.9) would cost you 21c (12%) more than buying 95 from BP Pymble on a Wednesday (156.9).

Who wouldn't want to pay 12% less for petrol?

I fill up both my daily cars with E10 and had with my previous dailys so the E10 (advertised cheap price) is what I go by. I drive from one side of Sydney to the other and what my issue is the amount one servo can charge in one area compared to another.

Eg: SW Sydney compared to the Northern suburbs.

There is always a BIG difference in price between the two, as much as 20+ cents a litre on some days. Now there are possibly dozens of reasons why but I can bet none of them have to do with the price of oil.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I swear at my GKTech ones every time I have to take them apart and replace a spherical. But I wouldn't swap them for anything else. They absolutely slay every other option, at least in terms of how they actually work. You sure you don't want to live with bearings? I mean, they don't have "ball bearings". They are rod ends and sphericals throughout. Tough as nuts, even though I have found more than one way to wear them out.
    • From when I was looking at getting the 86 engineered for the turbo, the joint said to put in a few euro 5 or 6 cats, then tune the car on a nice clean E85 tune When I was looking at a turbo for the MX5, it was basically the same thing, a couple of cats and a nice clean tune Although, it will depend on the year of the Jeep IRT emmisions standards required, and what mods are done, especially if it has a newer engine installed that requires a higher Euro
    • Yeah - but it's not actually that easy. There are limits for HC, CO, NOx and particulates. Particulates shouldn't be a concern in any petrol engine unless trying to comply to the very latest Euro standard. But getting a tune right so that all the others stay within limits AT THE SAME TIME is not a trivial exercise. You couldn't possibly get it right by just guessing at the tuner's dyno, unless he had a 4 gas analyser up the pipe, which is not often the case these days. It used to be. Every decent shop that did "tune ups" (as opposed to tuning) would have a 4 gas analsyer. Perhaps there's still quite a few of them around these days. But most "tuners" are only watching O2 and power readings.
    • Slight segway but the most expensive part of the whole thing which I would have thought would only be required for an engine size/type swap, not a VIV test, is emissions testing.  That's when you get into the big bucks.  I can't remember the exact price now but I got quotes for the GT-R based on swapping to RB30 (not that anyone bothers doing it legally anymore...) and it was around $4500 just for that alone.  The guy that does them manipulates the tune on the vehicle to make sure it passes.  The cheaper option is to book into Kangan Batman Tafe (I think that's where it was) and hire their tester.  Allegedly you're not allowed in there with the car though so not in a position to tweak anything to make sure the vehicle passes.  I'm sure in this day and age of ultra tuneable ECU's you could get the tuner to program a special efficiency (clean) tune that emits the lowest amount of particulates possible that would pass the test.  It might only make 50kW's but as long as it passed who cares!
    • I'm sure he has left signs, or, he is looking down, laughing That's my cunning plan for when I leave, lots of half finished projects, with no rhyme or reason of where I was actually up to, just to keep everyone on their toes
×
×
  • Create New...