Jump to content
SAU Community

Recommended Posts

Hi guys got myself into mischief today.

So the story goes my R33 gtst sat for a month and a half while I went on holidays and then installed a new front mount intercooler.

I tried to start it today after finishing of the install but the car wouldn't start. It just made a one solid click noise when I turned the key. I asked my mate to come around and jump it for me assuming the battery had just gone flat.

When we tried to jump it nothing happened and the positive terminal on my battery started to glow red! I was like what the hell? so we disconnected the leads and noticed smoke coming from under my bonnet. When I looked under the bonnet I noticed a small flame coming out of the alternator.

A cheeky spray of the fire extinguisher and we tried jumping it again and it started, however it was idling crap and kept running out of juice. While it was idling I noticed the battery light was staying on and my audio was not working (suspected I have blown a fuse there while jumping it).

So do you guys reckon it would have just been the alternator flogged out (I'm picking up a brand new one tomorrow) or is there something else to look for?

Cheers guys!

(PS: the alternator was making a quiet grinding noise once started)

Link to comment
https://www.sau.com.au/forums/topic/428824-alternator-problems/
Share on other sites

How did it sound when it did turn over? Did it spin over quickly or was it slowly? It sounds like the starter is cactus, drawing a too many amps causing the terminal to glow, or possibly the motor was hydraulically locked? Was the negative jumper lead on your car connected to the negative terminal on your battery or to an earth on the motor? Also, ensure you check all fusible links, fuses and wiring.

Sounds like the altenator wasnt the original problem but it may be an issue now. Got a multimeter?

Start the car and check the voltage and report back.

battery terminal glowing red is not good. Is there any voltage at all out of the battery? If it is not a sealed battery check the fluid levels. If one or more look like they have no liquid in them then it might be a battery issue.

I placed the negative on the bolt holding the strut brace in.

So I replaced the alternator today with a brand new Bosch unit then jump started it. Worked straight away then I gave it some revs till the battery light disappeared, took it for a drive and it was nice and crisp. Until the engine warmed up and it started to surge.

Tried to baby it home but the surging got so bad it was trying to stall in first gear with foot flat to the floor with a lot of jerking. Car stalled on the side of the road and would not start, made the same one click noise and nothing :(

Got it towed home and I have parked it up and trying to forget it exists haha.

So any ideas on what the problem could be? Might tackle all the fuses tomorrow.

I also noticed that while it was surging like a champ the airbag light was flickering on my dash? Wtf?

Replaced all the fuses and put a new battery in today and the car is fixed :D drove it for 3hours straight without a hiccup.

Thanks guys great help. Never new putting a fmic on would give me this much headache haha and be such a simple problem to fix :S.

I think I was thinking to much into it.

  • 2 months later...

When I had probs with battery in my R33 GTST

I jumped it with only a 400a starter kit if you

jump start do it from terminals in engine bay on right side

of car front terminal positive ( there are 2 positive terminals )

Negative on earth strut at back of box this will give you direct feed

to the starter motor for maximum current when starting

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • it takes so long to get things done but ... they are nearly there and we hitting the track soon again  So - at Perth Festival of Speed the car unfortunately had a decent off, wasnt me driving, wasnt the person drivings fault. Long story short car got sent very fast towards the wall without the control on throttle from the driver input and a disaster was averted but there was damage that needed to be fixed - carbon busted and alot of bent bits The splitter got munched and had to go back to get fixed - took a bit to get it there, fixed and back but got a surprise package when a new double element higher DF splitter came back - nice surprise !  and first person to have one     At a car show I took the car too some punks stole one of my carbon indicator blanks and stomped on the other so had to get a new set of headlight / indicator combo from tops stage so got front fender vents as well to put in the order     While all this was happening the new MCA golds turned up and did some fiddling around with those   Put in the flappy paddle system and clutch lockout wiring/ system   We have also put shorter gearing in top top it out at 300 kmph in 6th gear  where previously I held 5th to 282 at SMP and 277 in Perth   Looking for better control and faster acceleration     I wasnt intending on doing pedal box I was managing with the brake master replacement system I had going on and adjusted std pedals but on applying the clutch switch to the old system we found the *insert technical word here * bar that goes from the pedal to the master was bent about 40 deg and about to snap = lucky find otherwise be a bad bad time - discussion was had about getting a custom bar built to withstand the load but in reality it was time      making any suspension, wheel or anything adjustments to date has been a nightmare - aero off, adjust, check and repeat - time consuming and hard - short of going full airjack system we fashioned some external manual car lifts this will make life a million times easier     All the bent framing, some intercooler pipes and other has been fixed and replaced and after 6 months I finally have the car back at home in my control so its get to work on it, set ride heights, wheel align and will start track testing again soon   So ultimately other than a few flashy bits nothing actually looks likes its been done but in reality alot has. Typical   We'll see how all this goes        
    • I'm far from an expert, but for sticking bits of metal together occasionally I got a MIG, the biggest one I could get with a 10a plug (because while I have some 15a GPOs around, they are not everywhere).  Also, because I get through SFA, I just buy the small disposable gas bottles at Bunnings, I'm not opening a BOC account to get through 1/10th of a full size bottle each year
    • FWD is different though.
    • Ignore the BOV / recirc valve question. You have an NA and shouldn't have one. If there magically is one though... It should be removed, though it shouldn't really effect it in the way one will for a turbo motor with it venting to atmosphere while running an afm.
×
×
  • Create New...