Jump to content
SAU Community

Vic: Swaps Pair Of Lenso D1R 18X10 For 18X8

sledgy
 Share

Recommended Posts

sledgy Enthusiast

sledgy

Posted
Posted

Hey guys, picked up a car with these rims. It has 18x10 on all concerns and tram tracks so much it's killing me. So I need someone to capitalise on my misfortune, I'd like to swap a pair of these rims with someone who has the exact same rims but in 18x8. I know someone out there has a set of 18x8 on their car and wishes their rears were 18x10's!

Rims have a set of Bridgestone RE050 tyres in 255/35/18, tyres have +80% tread and no taper wear.

Not sure the offset but will pull them off and measure if needed. They're currently on a R33 GTR, same offset front and rear. You can pick any 2 you like. They're all perfect condition with no gutter rash or marks of any kind.

Not interested in selling them, only swaps.

I need the 18x8s to have decent tyres, not much to ask given the great deal someone is getting here.

IMG_1861.jpg

IMG_1860.jpg

I'm located in Bayswater North Victoria.

Send me a PM and we can sort out a time.

Cheers!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • GTSBoy
      R34 GTR Speedo Drive , sensor type ?

      By GTSBoy · Posted

      It's almost certainly a reluctor generating an "AC" waveform. No, ECUs don't generally read those - they're usually set up for PWM square wave 0-5v stuff.
    • Butters
      R34 GTR Speedo Drive , sensor type ?

      By Butters · Posted

      Working through possible solutions of converting my mechanical speedo.    Anyone know what type of speedo sensor the factory r34 gtr getrag has ? what the output is ? I assume its not a VSS and more a voltage like earlier speedo sensors ? Can an ECU read it ?  
    • Duncan
      spot the stagea

      By Duncan · Posted

      roof rail delete used to be a thing, they were made locally for a while too
    • AnimalGarage
      spot the stagea

      By AnimalGarage · Posted

      I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • AnimalGarage
      Can you mount the ATTESA pump in other locations?

      By AnimalGarage · Posted

      According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
×
×
  • Create New...