Jump to content
SAU Community

Recommended Posts

the noise i get cant be avoided with careful clutch work. its always there. I know the clunking noise from sloppy clutch work and the noise i get is a single distint click, almost metallic like. turning the music up usually helps :P but i know its still there.

the noise i get cant be avoided with careful clutch work. its always there.

dido, mine is the same. light clickign noise, like a bearing being dropped into a tin can...and whether i ride the clutch, let it out at idle etc etc, it usually lcicks, and not always on the initial take up, sometimes i move 1-3 mtrs before it clicks :Oops:

dido, mine is the same. light clickign noise, like a bearing being dropped into a tin can...and whether i ride the clutch, let it out at idle etc etc, it usually lcicks, and not always on the initial take up, sometimes i move 1-3 mtrs before it clicks :Oops:

yep like a bearing into a tin can is a good description of it. looks like we have the same issue. it would be great to work out what it is??

  • 3 years later...
dido, mine is the same. light clickign noise, like a bearing being dropped into a tin can...and whether i ride the clutch, let it out at idle etc etc, it usually lcicks, and not always on the initial take up, sometimes i move 1-3 mtrs before it clicks :Oops:

i know i know i just dug up a very old thread about clicking but it's the only thread i discovered with the same problem as what im dealing with!!!!! Had anyone resolved this clicking problem?

Hey dude,

Very old thread haha!

But yes, I had this problem, when I first got my series 2 I had an annoying clunk coming from the rear of my car.

It turned out it was my standard muffler knocking against the under body, but it would only do it after it had warmed up!

As soon as the exhaust was changed it is quiet as. So thats one thing u can check if you still have the stock exhaust.

Also as mentioned earlier in this thread its worth attacking the standard suspension with a socket set and making sure everything is nice and tight.

Hope you can fix this mate, It used to drive me nuts!

Seeya!

This is giving me the shits, clicks most times when im in traffic and the driveline goes back and forth...clicks both sides. Sounds like a marble droppped in a tin can. Ive checked the half shafts for play but they are tight as, suspension is all tight.....exhaust isn't the issue. Handbrake is in good condition. any other ideas people...???

This is giving me the shits, clicks most times when im in traffic and the driveline goes back and forth...clicks both sides. Sounds like a marble droppped in a tin can. Ive checked the half shafts for play but they are tight as, suspension is all tight.....exhaust isn't the issue. Handbrake is in good condition. any other ideas people...???

Turn up the stereo ;P

This is giving me the shits, clicks most times when im in traffic and the driveline goes back and forth...clicks both sides. Sounds like a marble droppped in a tin can. Ive checked the half shafts for play but they are tight as, suspension is all tight.....exhaust isn't the issue. Handbrake is in good condition. any other ideas people...???

I've read, and I emphasize the *read* and not *know* part :P, that a similar problem can also be caused by the driveshaft from the gearbox to the rear diff.

Does it have any play in it?

I think my issue might be in one of the half shafts, I get a loud clunk on gear change and accelerating (after not accelerating for a while).

i genuinely think its not the drive shafts as its not a clunk as such, I might actually take the drive shafts out and have a geez just to satisfy that thought. Its like a click. From both sides. Doesnt effect any driving at all its just annoying as f**k and makes me wanna drive my corolla instead.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Let's hope that's not a copy pump either. There were so many copies of them back in the day.
    • Damn it, I was at work last night, and stayed in a room there during the storm with the car outside, but undercover, I just went downstairs and well....there was a large steel locker that has come from some place last night, it wasn't anywhere I could see yesterday, and yeap, it landed on the fraking car....of course it did..... LOL So, I'll need to take it back for paint and panel, luckily it was only the boot that took the hit, so it could have been worse Serves me right for staying at work and getting on the cans with some of the boys
    • Yeah, really happy with how it all turned out As for aftermarket lip, nah, I'm not really a fan for practically reasons on a street car that gets driven everywhere  I did have the full lower kit on my 2015 STI, but found the front lip scrapped alot, even at stock 4x4ish ride height As the NC sits now, with the lowest point of the car at 110mm, so just legal, some steep driveways and steep speed humps will still "just" scrap those little plastic OEM air dam thingies on the undertray just before the front wheels
    • Here's one I help build and tuned a decade ago, Garrett  GTX3071R Gen 1, T3 twin scroll 0.83 rear housing. Went from larger 272 cams down to smaller Tomei Poncams to help with the low end. S13 non VCT motor. Car was purpose built for the track, hence low down was the focus. Note the actual dyno chart shows lower boost, however the EBC and boost gauge showed 1.9Bar (Ignore the torque, I was young and didn't know how to set derived torque)  
    • I’m doing some side developments on SR20det S13 engines, its one my hobby cars used it to compare flow capacity of some smaller size wheels. SR20det is one of another JDM legendary engines I'm sure there are plenty of SR enthusiasts on this forum, I will share results some common turbo configurations here. a quick run down of what the car is: Wide body 180sx Type X with black top engine (blue). It has: Stock bottom end Haltech 1500 ECU 5-0 motorsports trigger kit Kelford SR20DET Beehive Spring with Titanium Retainers Kelford Cams SR20DET S13 188-B 268/272 Cams G25-660 Turbocharger in T2 .64 rear housing internally gated ARP Head studs MLS head gasket 1000CC ID injectors Walbro 450L Fuel pump Front mount cooler kit JJR’s 3 inches turbo back exhaust (its too short for the 180sx it had to be extended) Pump 98 fuel Hub Dyno tune So far made 270rwkws at 22psi full boost by 4500RPM. Engine is very knock limited hence a pretty bad looking top end. From previous experiences it seems like SR20dets are happier with bigger size turbine, some thing like a GT30 would make way better top end, but on same time response is lost. It won't be a problem with S15 VCT engines. I'll be testing alternative turbine housing, turbine wheel and possibly dump pipe options for extra flow to resolve the problem and of course E85 would resolve all the issues.            
×
×
  • Create New...