Jump to content
SAU Community

Recommended Posts

My car produces a clicking or clunking noise whenever i change gears or take off from idle, if you take off very slowly you can't hear it but if you take off quicker you can hear it. Its coming from the rear end of the car, and its R33 series 1. Any help or advice appreciated. What could be the problem, has anyone else experienced this? Thanks.

Universal joint - it's a join that will move in "any" direction, and still maintain a solid connection. On a tailshaft, it's the bit that connects the shaft to the diff. As the diff can move (well, in non-IRS cars anyway) and so can the gearbox etc, the join must be flexible.

No doubt someone will have a pic floating around.

guys i had the same problem too.. when to two suspension specialists and still couldnt find anything wrong.. so i did a bit of investigating my self and found it to be my wires in the boot coming out of my subs and knocking against the body of my car.. i also found a pen in there as well as some screws lol... probably isnt the problem but worth having a look..?!?!

I have been to two different places to try and find the source of the clicking noise coming from the right rear of my car. Noone has been able to find it.

To a certain extent the car has always made the noise, and i have had the car for 4 years. Its nto the diff, fluids have been changed many times with no change, its not the uni joint as they have been inspected and found to be in better condition then aother cars in the workshop, and not susp as all my susp has been changed at on etime or another.... so i am at a loss to find the source of the clicking noise....oh and not lieky to be tools etc, as the time when it is easiest to hear is when pulling out of the pits with the concrete wall on the outside and the clicking noise reverberates off the pit wall, plus all the boot trim, spare wheel, jack etc is removed.

It could be anything, including the things i have listed as not being the source of the problem, only i couldnt be bothered throwing money at it when noone knows what it is....if you know the answer you could be the only one in the counthry that has fixed the prob. :(

Its one of those probs that haunts me :(

does it do it everytime you take off? could be just the brake pads moving on the pins, have similar click when i suddenly jump on the breaks... or the handbrake pads moving off...

just a thought

That noise will more than likely be driveline backlash. Not a major problem, just annoying. You can usually avoid making the noise with practice, and by being a bit smoother. And yes, you can do it with a button clutch :D

I suffer "driveline backlash" - when I push the clutch in suddenly - eg i was reversing out of a carpark and someone ran behind me - i get a loud clunking sort of noise. It feels painful for the driveline, what is suffering? Uni joints, diff?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don’t really have any ideas how to set the timing on the CAS 😂, sounds like the top, sounds like it maybe misfiring as well as ticking,  got the box sorted 😌, must of been a air bubble on the clutch side
    • Use a 2' length of hose (that's 2 foot, not 2 inches) as a stethoscope to localise the source of the ticking. From cam covers? From exhaust or turbo manifold gasket? From injectors? From lower down in the engine? Etc. Use a timing light to set the timing. Put Redline Lightweight Shockproof in the box. It's not the very best thing for the box, but it will take a box that refuses to engage a gear with other oil, and make it engage a gear. I had to put it in when I installed the R33 box I have in my car. It would not select ANY gear when running. Smurf jizz made it work. That was >10 years ago and I still use it. I'm stuck with it now. Failing that - rebuild the box.
    • Well done Duncan. The fuel tank bulkhead lid is also in great condition (some of mine were stuffed). These are now out of production and good ones like that are becoming hard to come by.
    • Wow that's a steal, you've done well there. 
    • Exterior LEDs R34 2Dr R34 4Dr Position Lamp T10 T10 Winker front T20S T20S side T10 T10 rear T20S S25S150 Anti-hyfla relay TYPE3 TYPE3 tail T10 T20W Stop Lamps T20W T20W High Mount T16 T16 back T16 T20S number T10 T10 trunk T10 T10 Interior LED Item No.     Map Lamp BA9S single-sided     Room Lamps T10×31     Trunk Lamp T10     meter Early T6.5 pedestal     final T6.5 pedestal     NISMO T6.5 pedestal     Liquid crystal section T6.5 pedestal     Winker T6.5 pedestal     High Beam T6.5 pedestal     3 SERIES METER Early T6.5 pedestal     final T6.5 pedestal     NISMO T6.5 pedestal     air conditioner Early Liquid Crystal T3     Late LCD T4.2 Short     button T4.2 Middle     Hazard SW T3 Pedestal Short     Keyring T5     Cigar Socket T5
×
×
  • Create New...