Jump to content
SAU Community

Recommended Posts

Then there was also the unmarked copper heading up to the meet that jumped out infront of you

Agreed, the run home was also good.

I looked in my re-view mirror when we were towards the bottom of the putty and there's Terry, must of really "tested" the Evo on the way back :)

nah, those bikes held us up.

Then there was also the unmarked copper heading up to the meet that jumped out infront of you

Agreed, the run home was also good.

I looked in my re-view mirror when we were towards the bottom of the putty and there's Terry, must of really "tested" the Evo on the way back :)

Definitely the exception to the stereotype; let me tell you. ;)

Of course we didn't park anywhere... :whistling:

Asian drivers are really scary - even when we get things right! It's the stereotype that creates that terror :P

Don't worry Dale. I got your fingernail marks out with a heatgun :P

Nah srsly, we just about caught up until the red light punctuated our progress. Taheo was pushing me in the mighty Stag and I wasn't prepared to go over a certain speed being the lead car > just kept a tight line. Enjoyed it despite being wary of the blitz.

Here we go guys. Sorry it took so long to get up! (thats what she said)

Feel free to share it around if you deem it worthy of such. Make sure to watch in 720p!

Cheers,

Shaz

Edited by XS80ST

Here we go guys. Sorry it took so long to get up! (thats what she said)

Feel free to share it around if you deem it worthy of such. Make sure to watch in 720p!

Cheers,

Shaz

Watched it, loved it, shared it!! Worth all the editing mate! Rolling footage looked mint!

Was a great day! Thoroughly enjoyed it... apart from the bad roads to and from wollombi.. may need to scratch them next time.. sorry to everyone behind me during that section, it was very rough in my car and took it very slowly...

Pics and vid are awesome, great to see. Well done!

Was a great day! Thoroughly enjoyed it... apart from the bad roads to and from wollombi.. may need to scratch them next time.. sorry to everyone behind me during that section, it was very rough in my car and took it very slowly...

Pics and vid are awesome, great to see. Well done!

With your steam roller tyres you would be lucky if the Grand Canyon caused you an issue :P

With your steam roller tyres you would be lucky if the Grand Canyon caused you an issue :P

ha not really... i have the same issues as everyone, but because there so wide its harder to dodge them!

Thanks Terry. Good to get some positive PR for the club too. Hope you didn't mind me using the SAU logo.

Not at all mate! If anything we should be thanking you for promoting the club! Every bit helps and being attached to an epic video is a hell of a way to do it :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • How much ya asking drunkan 
    • A few other things to round out the chassis mechanical checks. Diff is nice and full of new oil, pretty sure it is Castrol VMX (I run the same on Award's recommendation). I didn't pull the cover to check, but I'm 90% sure the diff centre is a nismo mechanical (old school, not the gt pro). Gearbox is also nice and full of fresh oil, not sure what it is but not redline. Tailshaft bearing looks OK and a tailshaft loop is in place
    • Front lower control arm is standard with new ball joints, tension rod looks like JJR spherical. Front upper control arm is standard with adjustable bushes in the outside end     Rear arms are all nismo, surprisingly all the bushes at either end look standard but in good condition Subframe has standard bushes with lock collars HICAS has a lock bar with standard ball joints at the hub end
    • Next, shocks/springs/swaybars It has Sydneykid valved Bilsteins with HKS pillow ball hats all round. Springs are Eibach race springs on adjustable height platforms, with helper springs in the rear to stop rattling. These are 250 all around but easy to change for something else if required. Swaybars are powdercoated blue but would be Selby's/Whiteline solid adjustables, 21mm rear and 24mm front. Bushes and links in good condition All in good condition, no sign of leaks/damage etc
    • yeah for sure.....remember to put your tools away at the end of each day kids!  Actually it has been kinda nice working on the car, lots of memories of good times. I can pretty much hear him telling me off for stuff still.
×
×
  • Create New...