Jump to content
SAU Community

Hks F-Con V Pro Np5-15 Harness?

Reprieve

By Reprieve,
in Four Door Family & Wagoneers

 Share

Recommended Posts

Reprieve Community Regular

Reprieve

Posted
Posted

Hi there fellas iv been looking for one of these bad boys for a while now , its like looking for a ghost anyone know how to find one because for the life of me i cant find one. im guessing a few people are probably in the same situation. Anyone had any luck getting hold of one?

Thanks!

Link to comment
https://www.sau.com.au/forums/topic/428997-hks-f-con-v-pro-np5-15-harness/
Share on other sites
Daleo Grand Master

Daleo

Posted
Posted

My tuner in Perth who does f-con sold his last harness to me, but he said he can make them in a batch at a price.

I'm guessing east coast would have more

What would he be charging for them?

I'd guess he'd be able to sell a few.

scotty nm35 Grand Master

scotty nm35

Posted
Posted

Do you need the harness? Perhaps hard wiring is an option?

I have a spare ecu and wiring harness here, but there are 4 extra pins used that aren't in the oem loom...

Where are you located Dale?

Reprieve Community Regular

Reprieve

Posted
  • Author
Posted

Dales ftw :P. I'm in Auckland new Zealand. yep I would like the harness a bit daunting chopping all those cables lol. Scotty what would those 4 pins be used for are they just spare? whoa 800 pretty hefty but I guess I is an option

scotty nm35 Grand Master

scotty nm35

Posted
Posted

There is an HKS dealer in NZ somewhere apparently... Craig's old mate used them so I heard, and they apparently sourced a harness. (not sure if true or not)

The 4 pins are extra wires going back to the ecu from the Fcon that aren't normally used, and are not populated in the oem plug. No idea what they do yet, I just drive the car. :)

scotty nm35 Grand Master

scotty nm35

Posted
Posted

Quite possibly... For the right price. :)

Do you need the complete harness, or just the ecu plug?

What are your power goals with the car? The Fcon is an expensive tuning option, do you have the unit yet?

Reprieve Community Regular

Reprieve

Posted
  • Author
Posted

the goal is forever changing getting bigger and bigger I don't really have a specific goal figure yet it just when ever I can afford to pour more money into my sink hole of a fridge, I'm at the stage where I need a ecu to carry on I would hope to hit round 200kw with ecu and my current mods (intercooler, 3"exhaust, boost controller, intake, engine / trans coolers, shift kit, fuel pump) I don't have the ecu yet so I'm guessing I would need the full harness. hopefully after the ecu next step it to attack my turbo. as for price I know it's quite pricey but iv committed to this so I'm going to see it through :)

scotty nm35 Grand Master

scotty nm35

Posted
Posted

The stock turbo maxes out at around 200kw, and you need to lean on it pretty hard to get that. I hope you have factored in the highflow sooner rather than later, once the ceramic turbine lets go...

There is always the Emanage Ultimate, I ran mine to over 300kw before switching to HKS. Don't let anyone tell you they aren't a good option, they are very capable with a good tuner on the case.

Reprieve Community Regular

Reprieve

Posted
  • Author
Posted

yep I have for a while now with 160 000 on the clock with original turbo Haha .i know emanage are quite good too but I have my heart set on the front. let me know how much ya want for your spare ecu n harness :P

Reprieve Community Regular

Reprieve

Posted
  • Author
Posted

Bit of an update on the hunt

So apparently after millions of emails to various other countries it would appear that this part can only be supplied to authorized Fcon dealers Evin if they did have stock i couldn't get the harness due to HKS selling restrictions?? that's for the NP5-15 (42002-AN004)

Reprieve Community Regular

Reprieve

Posted
  • Author
Posted

another update

so I sent a email to David (david@1jzmerc.com)

he replied with this info so I thought I would post it up for anyone else in my situation

Price is $600 each (50% upfront, 50% when completed), with minimum group buy of 3, with lead time of approx 4-6 weeks.

Plus $100 each for base tune, and for the tune to also work with your choice of:

* wideband controller and analog output setting. (recommended for closeloop feedback/learning at idle, cruise & full-boost, otherwise engine checklight will be triggered)

* MAP sensor.

* injectors.

David.

scotty nm35 Grand Master

scotty nm35

Posted
Posted

another update so I sent a email to David (david@1jzmerc.com) he replied with this info so I thought I would post it up for anyone else in my situation Price is $600 each (50% upfront, 50% when completed), with minimum group buy of 3, with lead time of approx 4-6 weeks. Plus $100 each for base tune, and for the tune to also work with your choice of: * wideband controller and analog output setting. (recommended for closeloop feedback/learning at idle, cruise & full-boost, otherwise engine checklight will be triggered) * MAP sensor. * injectors. David.

Not a bad price, My spare loom and ecu wouldn't have cost much less shipped at a guess, and it would have been a shame to hack up perfectly good spare parts. How many other guys are willing to get on the group buy though?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      Possible swap on R34 RB20DE NEO?

      By Kapr · Posted

      Hi. A little bit of an update. It maybe(hope not) looks like i would need a new tranny(it would be "maybe" a cheaper or better option anyway) So i need some info. I know i need a different propshaft(i can make custom one) LSD is not a problem cuz the engine will be still(for now) N/A RB20. So if i buy RB25DET NEO tranny...is there something else i need? I read something about push/pull type but i do not know if i need to "change" something or i can just plug n play onto my engine a go? Thanks for the advice  
    • OakvilleGTR
      Turn signal wiring question

      By OakvilleGTR · Posted

      Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      My heads are cathedral port! It's likely possible, but I don't want to add any extra moving parts (I know they don't move) between the heads, manifolds, etc. It will also affect how injectors/fuel rails etc sit and I don't really know if it would change how the FAST manifold goes/sits/fits. I have the LS6 steam pipes already as I have a very late LS1 block so it should be fine. I couldn't find anyone who had ever actually used one for this purpose, it seems 100% of people grind the water pump. The thermal spacers are 12mm and are half way to the cost of the newer water pump anyhow... so if it comes to that I suppose I'd rather buy a new pump. The bearing in the pump I do have is a little.. clunky, but it hasn't done that much time and I never noticed it when the car was together in the past few years, so..
    • sonicii
      Lower A arm Skyline v35

      By sonicii · Posted

      The bushing has failed, not all that uncommon for a car of this age.  Any mechanic should be able to push in a new bushing for you, or you can probably buy the entire lower control arm, complete with bushes.
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      Could you not use "thermal" spacers to give the clearance, like the ones I used between the blower and head? That raised the manifold height by around 10-15mm Albeit the ones I used were for cathedral ports, but I assume they have similar for rectangular ports????
×
×
  • Create New...