Exhaust Muffler Suggestions

[Manuel Kasko]

Hey everyone,

Car is finally up and running well.

So I have decided on finally fixing the broken exhaust.

I have a rather large crack where the exhaust joins to my mid muffler.

Looking to replace the muffler with a aftermarket piece and sorting this issue out.

Any recommendations on a 3 inch mid muffler for my exhaust.

Something that is not so restrictive but nothing over the top loud.

Cheers,

Daniel

[mattie4270]

Try AES mufflers,well priced and work

[zebra]

Hooker super comp aero chamber

[Manuel Kasko]

Hooker super comp aero chamber

http://www.holley.com/21506HKR.asp

Is that the type you're talking about?

[Manuel Kasko]

Try AES mufflers,well priced and work

I couldn't find examples of mid mufflers on their website.

Do you have a website or link to a 3" Center Inlet, 3" Center Outlet

[Missileman]

just put a second hand zorst on my 32 2L-t

3" to a huge straight through mid muffler, then going to a 31/2" and a small straight through cannon, friggin a lot quieter than I thought, and only $200 from epay

thanks again shifty

[zebra]

http://www.holley.com/21506HKR.asp

Is that the type you're talking about?

Pretty much, I have a 3 1/2" version in my garage if you want to havea good look

[Manuel Kasko]

Just found them online for $120 delivered

I think it is the one someone else suggested because they have a nice deep tone.

http://www.ebay.com.au/itm/HOOKER-AERO-CHAMBER-MUFFLER-3-CENTER-CENTER-21506-HKR-/200608424848?pt=AU_Car_Parts_Accessories&hash=item2eb531a390&_uhb=1

I also just emailed the guy from AES about how much he would charge as well.

[Ben C34]

I have a hooker aero chamber with a berklee straight through. heaps quiet and no drone.

[XRATED]

magnaflow....

[Manuel Kasko]

Plenty of good options

Thanks for the brand names guys

I'll get some quotes and pick one up

[mattie4270]

AES will make what ever you want

[Missileman]

Was talking to one of the welders at a large exhaust shop that stock Magnaflow, while he didn't mention any brands he did say that the imported ones were not that great.

[34GeeTeeTee]

Unfortunately i think ill be in the market for a new exhaust soon as it seems the new turbo may have collapsed the muffler lol

[C4a0s]

HKS super turbo muffler... supposed to be non restrictive yet very quiet...

[jamesdt]

I'm also looking at fitting a mid muffler to my exhaust, since fitting the 6 boost with the gtx3076 the exhaust is so much louder than it was with the stock turbo and manifold on there.

Currently I've got a 3" stainless dump off the turbo, 3" cat which I'm unsure of the brand or the quality of it, the mid sections a straight through pipe with the only muffler being a x force varex muffler at the rear but if you drive around in the quite mode it sounds utter shit!

Good thing the short mid section is flanged so it's easy enough to get something made up. I'm prob leaning towards a stainless straight through magnaflow. I've had the aero chambers on my v8's honestly not to sure if I'd like that sort of deepness coming out of a skyline. Hmmm. Any other suggestions on mid mufflers?

[mattie4270]

Maybe try an AES muffler,im sure he does any size you want,he just needs dimensions.did my GTR and it sounds quiet but nice

[Manuel Kasko]

Yeah he said to just send him the densions.

Going to get the measurements and email him.

He hasn't quoted a price yet of course

[Manuel Kasko]

Kind of hard to get measurements whiles it's on the car.

But I got under there with the tape measure and got the following measurements.

Length = 29cm (11.6inches)

Width = 24 to 24.5cm ( 9.4 to 9.6inches)

It also seems my current design is.

3 Inch centre inlet

3 inch off centre outlet

All of the designs I could find on the Hooker Aero were either

3 inch off centre inlet with a 3 inch centre outlet.

or

3 inch centre inlet with 3 inch centre outlet.

Not sure what to do in that situation

Any advice would be great.

Otherwise I guess I can just take this to AES and they can hook me up with a custom made one.

[wolverine]

Kind of hard to get measurements whiles it's on the car.

But I got under there with the tape measure and got the following measurements.

Length = 29cm (11.6inches)

Width = 24 to 24.5cm ( 9.4 to 9.6inches)

It also seems my current design is.

3 Inch centre inlet

3 inch off centre outlet

All of the designs I could find on the Hooker Aero were either

3 inch off centre inlet with a 3 inch centre outlet.

or

3 inch centre inlet with 3 inch centre outlet.

Not sure what to do in that situation

Any advice would be great.

Otherwise I guess I can just take this to AES and they can hook me up with a custom made one.

----------------------------------------------------------------------------------------------------------------

Are these mufflers directional?? Can't you just turn the muffler around?