Gtr Single Turbo Conversion.

[gtr32zilla]

Hey guys im currently rebuilding my Rb26 and im looking at going single turbo,just after some input on turbo selection for good hp.

[Seano350GT]

precision turbz

[gtr32zilla]

Any specs on that type of turbo mate and the hp its good for?

[Captain Natro]

Lots of threads in the fi section on precision stuff

(Infancy I think there's a dedicated thread just for them)

[Bunta]

Input on turbo selection is really hard without any clear goals set out! Whats good HP? 500? 600? 1500?

Edited July 23, 2013 by Bunta

[34GeeTeeTee]

Input on turbo selection is really hard without any clear goals set out! Whats good HP? 500? 600? 1500?

This!

Precision are good! FP HTA are good! Plenty of options for you but we need to know goals if we are to give you any idea of choice....

[gtr32zilla]

I've looked on precisions website site still not sure on selection.im aiming for around 600+hp aswell

[defari]

Get nos. everyone neeeeds nos

[cowdy]

Agreed. Nos needed. Drop some floor pans

[gtr32zilla]

Despite all my searching and provided info from threads I've tossed up between two turbos,a HKS T51R & Garret TO4Z which would you guys suggest?

[34GeeTeeTee]

Despite all my searching and provided info from threads I've tossed up between two turbos,a HKS T51R & Garret TO4Z which would you guys suggest?

Did you research?

Did you read the Precision thread? Did you read the HTA thread? Did you have a goal in mind or just wanna slap a turbo on and hope for the best?

[Lithium]

Despite all my searching and provided info from threads I've tossed up between two turbos,a HKS T51R & Garret TO4Z which would you guys suggest?

Despite all the advice you have chosen to decide between two out dated over priced units not even being discussed so clearly you are in your own world and will do whatever anyway. Good luck, let us know what you get and how it goes.

[gtr32zilla]

I'm aiming for as much power as my forged engine will allow so was just looking at throwing one of the two at it a see what I get.precision is new to me so all I've managed to read about through mags and threads is how everyone uses garret or hks and get good power so haven't read up much on precision.

[mattis96]

I think precision and hta are the new standards now if you can. From results I've seen these two brands are just win win over other turbos in all areas. That's only my personal opinion, and my choice is between the 2. I was going to go with Garrett gt40 but have now reconsidered.

Good luck though

[34GeeTeeTee]

I think precision and hta are the new standards now if you can. From results I've seen these two brands are just win win over other turbos in all areas. That's only my personal opinion, and my choice is between the 2. I was going to go with Garrett gt40 but have now reconsidered.

Good luck though

In saying that you cant beat the T51r whistle but turbo technology is certainly making a big difference these days!!!

[Lithium]

I'm aiming for as much power as my forged engine will allow so was just looking at throwing one of the two at it a see what I get.precision is new to me so all I've managed to read about through mags and threads is how everyone uses garret or hks and get good power so haven't read up much on precision.

The T04Z doesn't rate that great against most range Precision and HTA turbos in power and certainly not response. Precision and FP HTA turbos are there to make T51R power with much better response, or go well north of their power potential if you so require. Like well well past anything HKS make.

All you are doing by not thinking or researching is spending more money for less and saving a bit of time. All good if you are happy with that

[Lithium]

 

 

In saying that you cant beat the T51r whistle but turbo technology is certainly making a big difference these days!!!

Heard a decent Borg Warner? Even an HTA3794?

[34GeeTeeTee]

Heard a decent Borg Warner? Even an HTA3794?

Nope not yet I'm not lucky like you hehe

[Lithium]

 

Nope not yet I'm not lucky like you hehe

[gtr32zilla]

I think I need to do a bit more digging I guess,sounds like this precision brand has better backing then expected and also seems to be well priced aswell so will do a bit more reading on specs tonight and rethink my decision.cheers for all the input guys great help.