Jump to content
SAU Community

Complete Turbo Kit For Rb26

500hp

By 500hp,
in Wanted to Buy

 Share

Recommended Posts

kudos.motorsports Grand Master

kudos.motorsports

Posted
Posted

There are pros and cons of each, the twins obviously keep a stock look under the engine bay however a single conversion does make any future work on the hot side of the engine bay much easier i.e. cheaper labour wise. No matter your option you will find a set-up that meets your requirements however value for money you can't go past the Garret GT2860R-5s, I PM you with a quote mid last week however only have one set left so if you're interested just let me know and I'll can put them to one side. If you wish to have a chat send me a PM with your mobile number and I'll give you a bell tomorrow.

Stock e-Tune Contributor

Stock e-Tune

Posted
Posted (edited)

If you need some factory twin manifolds, let me know. The pair I have are virually brand new.

sorry no complete kit.

as people chime inn you will probably make up the whole kit.

Edited by Stock e-Tune
Mick_o Grand Master

Mick_o

Posted
Posted

Yes they are bigger than -5's but doubt you will make 600hp on them unless the rest of your motor is up to scratch. Tbh if ya after 600hp you're better off going the big single path and you might wanna stretch the budget a bit more!

500hp Community Regular

500hp

Posted
  • Author
Posted

My mobile is fully built standard cams and injectors but I have a power fc and will be upgrading injectors soon to 800cc I have a full exhaust system massive intercooler and pod filters have forged internals and what not I'm thinking -10s cos I can pump out more

GTR STI Community Regular

GTR STI

Posted
Posted

I have complete Greddy THRUST TD05's with the option to go to larger TD06 SL2's kit from aircleaners to dumps 76 odd parts to this complete kit still in original boxes...never installed....had the Hi-mount manifold ceramic coated which cost a grand...8k for the kit

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Manur33
      Rb25det coil loom wire identification

      By Manur33 · Posted

      Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • davemoto63
      Stagea choice's which model??

      By davemoto63 · Posted

      Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • davemoto63
      Noobie Stagea owner..

      By davemoto63 · Posted

      Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...