Jump to content
SAU Community

Wrecking R32 4 Door

gunt_116
 Share

Recommended Posts

gunt_116 Enthusiast

gunt_116

Posted
Posted

parting out my r32 4 door as i have decided to build a s13 as the 4 door body is to bent.

selling everything off it minus motor, gearbox wiring hubs and rear diff. wheels are not for sale
both front door are in good condition, but door cards are average.
both rear doors have dents, but door cards are in gc.
front guards are ok but have average paint.
front brakes and discs are small possibly gts? single pot calipers and 280mm rotor or something, in gc.
tail lights have scratches and marks, boot and bonnet are average with small dents and paint is average.
both windscreens are in gc, no cracks or scratches.
let me know what your after will post at buyers expense make an offer on what you want.
will sell the body once it everything is out of it unless i get a decent enough offer as is, but both rear quarters are full of bog looks like it has been driven off a trailer as chassis rail has a bit of damage.
straight through 3" cat back exhaust with cannon
car is dark silver, can msg pics
0434950923
Located on the sunshine coast qld 4556
Link to comment
https://www.sau.com.au/forums/topic/429350-wrecking-r32-4-door/
Share on other sites
Mohsen Grand Master

Mohsen

Posted
Posted

Gday mate do you have the front window weather shields by any chance

DAMN! YOU BEAT ME TO IT!

if tonks pulls out ill grab the shields.. or just the passenger side!

how are the front door cars? velour or grandpa spec pimp plaid?

Tonks Community Regular

Tonks

Posted
Posted

DAMN! YOU BEAT ME TO IT!

if tonks pulls out ill grab the shields.. or just the passenger side!

how are the front door cars? velour or grandpa spec pimp plaid?

So much searching for nothing :dry:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Wazmond
      Stock rb25det neo questions

      By Wazmond · Posted

      Hows your intake piping? Are you still running stock? Having in the stock AFM position would mean, if the BOV was shut/venting out, it'd create the almost stalling kind of effect right // "the rich pulse behaviour" due to MAF thinking air is flowing ? But this would be better than having the bov in the stock position + MAF on/just before cross over piping right?
    • GTSBoy
      Stock rb25det neo questions

      By GTSBoy · Posted

      Essentially, yes. Although I wouldn't put the AFM on the crossover pipe. I'd want to put it into what amounts to the correct size tube, which is more easily done in the intercooler pipework. I bought a mount tube for card stile AFM that replaces the stock AFM - although being a cheap AliExpress knockoff, it had not flange and I had to make and weld my own. But it is the same length and diameter as the stock RB AFM, goes on my airbox, etc etc. I don't have a sick enough rig to warrant anything different, and the swap will take 5 minutes (when I finally get around to it and the injectors & the dyno tune).
    • Wazmond
      Stock rb25det neo questions

      By Wazmond · Posted

      So to summarise, the best thing to do is to move recirc to between turbo and IC, and maf on the crossover pipe. Meaning I'd need a recirc flange, drill a hole in the piping on turbo outlet area. And drill hole on crossover to fit/weld maf sensor? Either that or put the MAF on the turbo inlet right?  Is an aftermarket recirc/blowoff valve recommended? Do currently have family in Japan so could probably bring something back with maybe a cheeky lil SuperAutobacs run?
    • tsuokun
      Lets play a game - What is causing my oil consumption?

      By tsuokun · Posted

      Yep, so far most have said that it looks like corrosion on the wall from piston not moving. Which then has probably damaged the oil rings and caused those vertical marks. The longest the engine was still after the rebuild, was the winter of 2018 - 2019, plus the boat trip to Japan. When I shipped the car, it had normal gas in the tank but before that winter pause, it had E85 in tank.  In any case, even if either one of those was the cause, it happened close to 6 years ago and the car has been driven something like 30 000kms after the fact. Again, apart from the plugs and the dip stick, there is nothing in the way the car runs that would indicate what has been going on in the engine. I am going to consult a shop and ask their opinion, what would be the best approach. I do have some access to a garage I could use to diagnose further myself, but time is very restrictive. Might end up buying another engine that could be used while this one is being remedied. Without pulling the head, it will be impossible to find out if it needs another bore, but here's to hoping a hone would suffice.  Goddamnit, I would really have preferred this not happening.  
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      Boot is going to be replaced eventually. I just wire brushed what I could and rust converted. Then painted in rust kill primer. the spoiler also got repainted and plugs replaced on the ends. The under side of the bonnet is going to be black also, currently white. But red on the top side, same colour code as the silo to begin.
×
×
  • Create New...