Jump to content
SAU Community

Clutch bleeding issue

Jolinator
 Share

Recommended Posts

Jolinator Proficient

Jolinator

Posted
Posted

gday, i changed my clutch fluid, because it was absolute shite, -black

neway, bleed the system, started from the master cylinder , then the little junction box near the slave cylinder, then the slave cylinder, i flushed a fair quantity of fluid through it and im pretty sure there are no air bubbles, but ive noticed that the clutch pedel has gone wak, when you put your foot on the clutch you push it down and its compleatly free, up until half way then it starts to move the clutch, im just wondering if anyone could give me some advice on what has happend/ive done wrong

thanks

Link to comment
https://www.sau.com.au/forums/topic/42936-clutch-bleeding-issue/
Share on other sites
WHITE R32 Grand Master

WHITE R32

Posted
Posted

mine did that i just kept bleeding it there is alot of fluid in the lines of them eh so it takes a bit to get it all thru

i reccomend just keep going with it for a bit and it should improve.... just be sure to keep topping up the master before it gets under 1/4 full.. hope that helps :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      RB25DET Solid lifter conversion

      By Dose Pipe Sutututu · Posted

      If it's for a SR20, make sure it's not the American Poncams, might as well call them Poocams. Had a set in a friend's car, all scuffed up after a few track days. Like the metallurgy Tomei USA used is junk. Went back to JDM OG Tomei Poncams, no issues till now.   Tomei USA is not the real OG Tomei.   Random rant over, fk the US of A, bunch of c u n t s. 
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Most of the industry in North America either runs on Siemens or Allen Bradley. I have two redundant S7-1500's on my desk right next to me for simulation. Siemens has been losing ground though since Stuxnet, as cybersecurity is a big thing. In my line of work that is federally regulated, you must by law have a cybersecurity management program in place and its audited and inspected every so often.  I work with Emerson PLC's daily (RX3i's) and have done large biogas/refinery projects with their DCS's. Their PLC's are somewhat OK minus the way they do PLC redundancy (You have to download on both PLC's separately every time you make a change )  As for their DCS's... you'll be limited financially first before anything else stops you. Costs are exorbiant at roughly 10x what it would cost you to do with any other system (e.g AB PAC).  1990's, those suckers are brand new haha! Kraft-Heinz (An old client when I use to work for an ESP) still runs Siemens TI505 PLC's from the mid 80's. Ohh how I don't miss working with those... you could only do a certain number of online downloads until it's "Change" buffer would be full and you would then need to go offline to do a full download. There was no warning of when this was coming up and it generally would happen when you would go in at 2am to make changes before production -_-.     
    • pogman
      RB25DET Solid lifter conversion

      By pogman · Posted

      Poncam the world
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Unfortunately, not only is that not the case, one of the main "Selling points" of safety over comms is they clearly state in writing that there's no need to segregate safety networks from non-safety networks. It always gets intermingled with everything else on an ICS/OT network. 
    • KKaplumbaa
      SR20 to cefiro

      By KKaplumbaa · Posted

      Hello. I have an a31 cefiro but since I am in Turkey we have a CA20S engine. I did some research. Then I found that I can swap with a ca18 but when I heard that it has the similar substructure as the s13. I thought I can swap with an sr20 because the sr20 was used with the s13. So can I easily swap the sr20 on my cefiro or is it difficult? 
×
×
  • Create New...