Jump to content
SAU Community

Recommended Posts

When driving, my car will drop a cylinder making it sound like a wrx which I'm sure is to do with my YJ coils I bought a year ago (just changed spark plugs and it's still doing it). The problem is that it only happens randomly as it can happen within 5 minutes of driving or 30 minutes of driving which makes it inconvenient. Is there any way you can tell if the coilpack is faulty by just looking at them? Perhaps driving around at night with the coilpack cover off and seeing if it shows spark? Any ideas?

Edit: If I pull over when it drops and start the car back up, it will return to normal

Edited by Dani Boi

Visual inspection of the coilpack will show up and cracks or carbon tracking across the outside, but given that they're only a year old, they probably haven't suffered the sort of age related failures that you can see.

Best bet is probably just to find a set of known good other coils and either swap them all out and see if the problem goes away, or keep swapping them out one at a time until the problem goes away. Whichever way you go about that you will end up swapping one coil at a time if you're trying to find which one is at fault.

My old RB20 used to drop a cylinder every so often and restarting it did fix it most of the time. And it was caused by a faulty coilpack. Swapped them out with a known good set and it never happened again.

take the cover off coil loom, drive the car until it starts missing, then disconnect each cyl one by one.

one of them you will notice that the engine sound will not change, that is the cyl that you are having issues with. remove the coil pack at a later date and check the loom, also check the injector connector for that cyl too.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
    • Nah, not really responsible for that little fiasco, but I'm still pissed at myself for writing off my 86, or when I reversed my VX into a pole just before selling it, but, meh, 5hit happens to stuff, all it takes is a slight distraction, and life is full of distractions, and "dooh" moments   
×
×
  • Create New...