F50 Brembo Brackets

[Chris32R]

Hey guys,

Does anyone know where I can buy a brembo F50 caliper bracket to fit R32 GTR?

Thanks

[Roy]

You really need to know what rotor you are running..then its the obvious answer...run the bran bracket that you are running rotor wise. OR go and get them machined up which can be the cheap or expensive option depending on circumstances

[Chris32R]

I want to run a 355mm sized rotor. Is there a bracket that you can buy with the rotor?

[djr81]

http://rdd-brake.com/index2.htm

[ichi-go]

Look around Yahoo Auction Japan

Bought my last set of dog bones from there to suit F40 brembos mated to GTR rotors

Didn't end up putting them on so i'm not sure how good/bad they are

[Roy]

So a 355mm rotor is half the story. You need to make up your mind over the brand and check the hat offset. Manufacturers use different height hats and different thickness hats...all offseting the rotor differently that means you need a bracket to offset the caliper appropriately.

If you dont have rotors than the link DJ posted is a good option. great quality rotors and hats and can buy the brackets off them.

[nizpwr]

As iam looking for brakes for my R32 GTR as well ive come across these if this helps

www.ao-ps.com

heaps of different rotors available and brake pads.

Giro Disc

Project Mu

Edited August 6, 2013 by nizpwr

[djr81]

If this helps it is a drawing of an adaptor bracket for an F40 to R33 GTR rotor (324mm from memory). If you have the offset of the 355 rotor (What Troy was talking about) it is easy enough to figure out the measurements for the bracketry required. The one I ended up with is pretty elaborate and most are much more straight forward. Anyway the trick is to find someone who will machine it for you at a reasonable price.

bracket.PDF

[Roy]

As iam looking for brakes for my R32 GTR as well ive come across these if this helps

www.ao-ps.com

heaps of different rotors available and brake pads.

Giro Disc

Project Mu

A few people have spoke of trying it but unless you have ABS I say it will end up a bit of a nightmare as the EVO brakes use a piston size as big./bigger than FPV Fords which is waaaay bigger than anything Nissan ever intended for this cars.

[Sfidz]

Chris,

Have a chat to Josh at Galvsport, He works closely with a CNC guy and between them they would be able to sort out your braking issue.

[ichi-go]

If this helps it is a drawing of an adaptor bracket for an F40 to R33 GTR rotor (324mm from memory). If you have the offset of the 355 rotor (What Troy was talking about) it is easy enough to figure out the measurements for the bracketry required. The one I ended up with is pretty elaborate and most are much more straight forward. Anyway the trick is to find someone who will machine it for you at a reasonable price.

bracket.PDF

+1 Finding someone who will machine at reasonable price and making sure the rotor offset is correct - unless anyone has access to a garage who can do both for you, can be tricky