Jump to content
SAU Community

Deca Officials ( Volunteers)

RCHOO

By RCHOO,
in Archived Events

 Share

Recommended Posts

RCHOO Grand Master

RCHOO

Posted
Posted

DECA time again Saturday 9th Nov 2013

So once again we ask for your assistance

For this event to run SMOOTH on TIME and SAFELY we need a small group of volunteers (Officials )
to help run the day. With out the help of volunteers we can not run these days.
Officials are needed in 3 sections in the morning and 1 section in the afternoon.
All Officials on the day will be supplied with drinks and lunch.

An Officials briefing will be held before the Drivers briefing so all volunteer Officials will need to
be at the DECA complex by 8.30 am on the Saturday morning the 9th of November

So if your thinking about coming up for a look and not competing this is a great way to get up close
to the action.
Also if your competing and bringing a friend or 3 it would be great if they could put there hand up
to help out on the day.

So i would like to have
as many volunteers as possible so i can give people a break during the day .

So if this sounds like you or your friends post up in here or PM me and i will put you on the list.

Cheers WayneO.

MORNING


SKIDPAN

STARTER..
TIMMER......
FINISHER..

MINI WANG..

STARTER.....
TIMMER.......
FINISHER....
MARSHAL...

LONG WANG

STARTER...
TIMMER......
FINISHER....
SPOTTER 1 ..
SPOTTER 2..
SPARE..
AFTERNOON

SKIDPAN

STARTER....
TIMMER........
TIMMER,,,
FINISHER
FINISHER

Link to comment
https://www.sau.com.au/forums/topic/429716-deca-officials-volunteers/
Share on other sites
RCHOO Grand Master

RCHOO

Posted
  • Author
Posted

My missus would like to volunteer for the skid pan, not sure if morning or afternoon as she wants to ride with me on the back tracks...

Great

She maybe able to help me out with timing in the afternoon.

Odium Grand Master

Odium

Posted
Posted

Losing my voice again but see how I am on day, worst case l can do timing somewhere if I don't have the voice to start :)

Why is everyone getting Pre-DECA Flu?! It's meant to be post-DECA flu! :O

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Latest Posts

    • Watermouse
      Hypergear Turbochargers and High flow Services Development thread

      By Watermouse · Posted

      Another question sorry, what stainless do u use in the turbo external WG plumb back piping? Is it 321, 316 or 304?
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      Right, its been a while for updating this car, but I made some small but important progress today. In the end I bought an Ecutek dongle from the Australian distributor Tunehouse (for local hardware support) but have gone with a remote tune from Racebox in the US (because they have done millions of these, and I could not find any tuner where I could access the tune anyway as they are all password locked). The App is reasonably easy to work with, but the PC software reminds me of Haltech's ECU Manager that you need to use with the Plat Pro ECUs, it is a nightmare.  Anyway, I sent the details over, got back a tune file and a request for data logs. I finally got a chance to access a private test track today as they want redline logs in 3rd and 4th, and have sent them back for the first round of reviews. The main difference in the tune is going from 1.0 (stock) to 1.3 bar (19psi), although I'm sure is a lot of other stuff in the background. Keeping in mind this is a dead stock car with 125,000klm, this is what the App's performance test claimed: Before After Interesting to note that both 400m tests had the same terminal speed (158klm/h) but different ETs. And no, the speed limiter seems to be higher than that at 186kl/h. Summary of the key logged parameters for the 3rd and 4th gear runs were: Those little turbos were certainly whizzing at 200,000rpm+.  Also I'm really not that excited about oil pressure 55psi at redline so I think I'll go thicker than 5w30 (nissan recommend 0w20....) and see if that improves it. Other than that (and the big boost spike....) everything looks good as a start to me.
    • Sean'O
      3D printing fun

      By Sean'O · Posted

      Just one more post to show the final result and the original "janky" solution for a laugh. Everything feels really tight and no wobbling at all, very pleased 🙂
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      After drying a few days, time to put her back together 
    • Watermouse
      Hypergear Turbochargers and High flow Services Development thread

      By Watermouse · Posted

      Ahh ok, thanks again for your valued insight Tao
×
×
  • Create New...