Jump to content
SAU Community

Recommended Posts

Ok, let me get this out of the way first. I am well aware that the standard intercoolers on R34 GTRs flow very well and can handle in the vicinity of 370-380 awkw before they become too restrictive and an upgrade is needed. As it stands, my car is making power just shy of that and with some upgrades coming in the near future, I will be looking to upgrade my intercooler too. The car will not be a high-powered drag car (by high powered I mean a 500+ awkw monster) but it will be a super-street car ;) I currently have two options bearing in mind cost and relative performance gains. I have heard and read everywhere that ARC cores prove the best upgrades in terms of response, flow, heat soak and pressure drop, but you pay dearly for this gain. So the options I've narrowed down to are the TRUST Spec-R HG which measures 302x710x115mm, and the HKS Type R which measures 700 x 304 x 103mm. I can get both for around $1200-1300 at the moment. Does anyone have experience with either of these and what are your thoughts on using them for power in the range of 380-410 awkw? My main concern is decreased response and pressure drop with the larger TRUST core. What should I expect? Also, with the 115mm thick TRUST core, will I need to cut away at my front bar to make it fit??

Link to comment
https://www.sau.com.au/forums/topic/429741-which-intercooler-for-r34-gtr/
Share on other sites

I had the TRUST Spec-R HG which measures 302x710x115mm and on my 32 there were modifications needed to the front bar to have it fit but can't speak for a 34.

I fitted that cooler when I was making around 400kw or so and had no issues. Found that the car made power more consistently and had less issues as it heated up. I did not notice any problems with decreased response.

Hope that helps! :)

Can't say much about those specific intercoolers and their respective performances, but I can provide insight regarding sizing.

If you are running a factory front bar, you will almost certainly need to cut away some of it for both the 115mm and 103mm intercoolers. I am currently running a 100mm thick intercooler on my 34R, and I had to cut into my oem bar to get it to fit. If you go down this path, be prepared to not run the grating, or to fabricate a new mounting system for said grating. I fear that there won't be much bar left if you decide on the 115mm option.

Z-tune and perhaps S-tune bars do allow greater clearance for intercoolers, and should clear the 103mm cooler, but 115mm may still be pushing it. Hopefully someone else can provide their experiences with these bars and larger intercoolers.

Best of luck with whatever path you go down.

Edited by Four - Twelve
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I clean my wheels every time I was the car, I also clean the barrels, the only product I use on the wheels is truck wash, followed by wash and wax, cleaning the barrels is easy with one of these microfibre thingies on a stick from Sabco, there also great for getting in between the front guards and body, and tight spots in the engine bay ย 
    • An updated post here. Sounds to me like there's definitely a bit of sketchiness here.ย  Old mate with 10 rusting Torana's in the front yard might be more who they're focussed on. (For right or wrong).
    • Is this not just about people wrecking, and storing, multiple cars in their front yard? I now a tow truck driver that was contracted by the council to clean up housing commission front and rear yards in houses and unit car parks I'm all for working on, and doing maintenance on your car in your garage or driveway, but some people definitely take the pissย  There's one house locally to me that I walk past regularly where the front yard and driveway looks like a wreckers, multiple cars in various stages of being stripped, and the yard looks like all of fluids are basically dumped on the ground I may be wrong, but it seems that the initial reports, which I've seen nothing actually official about yet, may be getting taken out of context, like alot of the latest "the sky is falling" stuff found on the youtubes for clicks
    • have they? Link appreciated. I live in Casey. I can see both sides of the argument in this case. There's a lot of sketchy stuff going on. There needs to be a clear definition of what this is supposed to be IMO. I wager the intent was to be a broad sweeping brush against people who have 4 cars up on blocks on their front lawn, not someone who services their own car behind their own gate on a weekend bothering probably nobody. But it'd be hard to legislate the difference there.
    • Oh, the wheels were already off. I wouldn't normally take them off to clean them although it does make it easier with the ceramic, so I might take them off when reapplying. I don't drive much but now with the ceramic coat, when I do drive and they get dirty I can get most off with the pressure washer. I'll be switching to dirtier pads soon which was the motivation for the ceramic as I usually just clean them and sometimes use Autoglym wheel protector. Nah, f**k the barrels! Haha, I'll give them a quick scrub when they're off the car and a pressure wash, but even I draw the line with the barrels. Yes, dark coloured wheels allow you to get away with a lot! ย 
ร—
ร—
  • Create New...