Jump to content
SAU Community

Recommended Posts


Hi gents how are you all?

I tried to do a search on this bout could not find much, in saying that i found out alot of info on r32gtr and r33+r34 gtr awd syustems.

Is the R34GT-4 awd system the r32GTR type (easy to RWD convert via switch) or is it the newer R33 GTR type with the preloaded hydraulics wich burn out the clutches if you dont disconect the drive shft.

Thanks for the help guys much appreciated

Yee i have read that section and understand all that on a Stagea thanx guys,

But still leaves me with the question what type of AWD system is used on the r34 GT-4?

Is it just a matter of changeing the two computers and you can change from new style to old?

r34 gt4 uses r33gtr gearbox, different hicas module too, GTR does 100 calculations a sec while the stagea or GT4 only do 10 from memory, dont quote me on that tho. (that is any car with ETS-Pro vs standard ETS)
GT4 uses thinner drive shafts, different tail shaft and a different diff too compared to a gtr.
only the Stagea rs4-S and rs260 had a GTR driveline. rs4-S however didnt have the brembos.

R34 gt-4 should have a green plug under your driver side kick panel, unplug, start car and pump brake a min of 5 times in the first 3 seconds. 4WD light has to flash, cant stay lit. then you are in RWD mode.

did this to my stagea for the 3 years i had it, never had a problem, gripped perfectly when re engaged, no shudders or weird noises.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
    • Nah, not really responsible for that little fiasco, but I'm still pissed at myself for writing off my 86, or when I reversed my VX into a pole just before selling it, but, meh, 5hit happens to stuff, all it takes is a slight distraction, and life is full of distractions, and "dooh" moments   
×
×
  • Create New...