Jump to content
SAU Community

Recommended Posts

After the last EOI (http://www.skylinesaustralia.com/forums/topic/416591-eoi-simworld-2013/#entry6688024) died I'd see if we can organise another SimWorld event!

So - We (SAUWA) is thinking of holding another Social Event at Simworld in Carousel after the huge success of the previous events. Everyone had a great time at the last couple events although there have been a couple inflicted with motion sickness so its quite a ride

For those who don't know what SimWorld is check it out at http://www.simworld.com.au/ These are full simulators, where you get thrown about etc, nothing like anything you've done before.

The general format of the event is:

Group 1 - 5min Practice - Course 1
Group 2 - 5min Practice - Course 1
Group 1 - 10min Race 1
Group 2 - 10min Race 1
Group 1 - 5min Practice - Course 2
Group 2 - 5min Practice - Course 2
Group 1 - 10min Race 2
Group 2 - 10min Race 2
Group 1 - 5 min practice - course 3
Group 2 - 5 min practice - course 3
Group 1 - 10min Race 3
Group 2 - 10min Race 3
Final - 15min Race (combined results from Race 1, 2, 3 & 4 will determine who is in the finals)
* Minimum race time should be about an hour
** Comes with food supplied by Nandos or we can have pizza plus we can have BYO drinks
*** Group size is 9, as there are 9 Simulators

Note:
The costs approximately $65 if we choose nandos or pizza or $50 without food but I would imagine majority will want food so everyone will have to pay $65

The a full race simulators, not simple arcade games, so it will definately be an experience.

Friday nights we will get the longest time on the machines for our money and its been convenient for most people in the past. Maybe the 13th or the 20th of September might be a go-er?

Please register your interest ASAP, so we can make this event happen. Please invite family members (friends, wives, older kids etc), as all Simulators are equal, and doesn't require a drivers license We'd like to have this filled with SAUWA Members and there familys/friends, but seeing as we didn't get enough interest I'll open it up to the rest of SAU from the get go.

So far

* Trevz
* Lachy (Hank Scorpio)

* Gary

* Damo (Frosty)





Cheers
Hank

Edited by turboedsloth
Link to comment
https://www.sau.com.au/forums/topic/429982-eoi-sauwa-simworld-racing-night/
Share on other sites

  • 2 weeks later...

Btw hanky they didn't have skylines available last I heard

:O

What happened to our R34 race at Tsukuba!?!

Anyway I'm confident of numbers now, will try and contact SimWorld this week :)

  • 2 weeks later...

Sorry about the lack of replies guys, that's completely my fault, I do apologize.

http://www.simworld.com.au/contactus.aspx

"We have moved the machines down to the Albany Amusement Centre (formerly Albany Ten Pin Bowling)"


So SimWorld seems to be a no go, any other ideas you guys would like me to look into?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • R32 pics Not sure if you can upload pics directly, but i've added them through an imgur link above.
    • There’s a possibility that Infinity G35x front hubs may be compatible, but it depends on the exact fitment. Sometimes, parts like hub and bearing assemblies from different models can work if the bolt patterns, bearing sizes, and axle specifications match, but the G35x hubs typically have a different design. It's worth checking detailed specs (like the number of bolt holes, size of the axle shaft, and bearing diameter) to compare, as Rock Auto does list some parts that cross over across different models. If you're going for a pre-pressed hub and bearing unit, that could be a good option. These units are usually easier to install, as the bearing and hub come pre-assembled, but you’ll still need to verify fitment, especially the outer diameter of the hub and bearing dimensions.
    • Love the input man! Defo gonna check it out
    • 1994 Series 3 R32 GTR. Freshly built as the perfect weekender. Has many brand new Nissan OEM pieces (some you can no longer source). Last serviced (April 2024) at V Spec Performance, Melbourne, Australia. Feel free to DM me if any questions. Asking price: $190,000 AUD.  Engine RB26DETT Original 05U block Factory R32 crankshaft CP 86.5mm forged pistons Spool forged rods Factory cylinder head – rebuilt Factory valve train Factory camshafts Factory inlet manifold Factory throttle body Garrett dash -5 turbos Custom intercooler piping with Plazmaman clamps Plazamaman 100mm race intercooler Turbosmart BOV Tomei fuel rail 660cc injectors Goodridge 9000 series fuel lines with crimped fittings Stainless steel front pipes Tomei titanium exhaust with stainless steel cat converter Spit fire coils Powder coated rocket covers New Nissan coil pack emblem badge Fully repainted engine bay in Factory Black Refurbished ABS unit New Nissan brake master cylinder New Nissan brake lines New Nissan clutch master cylinder New Nissan washer bottles Custom catch can (powder coated with Goodridge lines) Steering rack rebuilt New Nissan power steering lines New Nissan AC lines A/C compressor refurbished AC condenser refurbished HPI radiator and new thermos fanes New radiator fans NOTE: All nuts, bolts, fixings new or zinc coated Driveline Factory 5 speed gear box rebuilt Xtreme twin plate clutch Stainless steel clutch line Rebuilt factory transfer case Custom one-piece tail shaft Rebuilt factory front diff Rebuilt factory rear diff Suspension HICAS deleted Bilstein dampers IKEYA formular front and rear arms and tie rod ends New bushes wherever possible Whiteline anti roll bars (underneath car only) Brakes Brembo F50 front callipers – 4 piston AP racing 380*32 front rotors, J Hook design Custom floating hat and calliper mounts Brembo 4 piston rear callipers PFC pads Stainless steel braided brake lines Body New Factory Black paint job Ceramic coated exterior panels New Nissan aluminium bonnet (super rare) New Nissan headlights (super rare) New Nissan indicators New Nissan front bar New Nissan front lower lip New Nissan head light and bonnet seals New Nissan windscreen cowling New Nissan wiper arms and wiper blades New aftermarket windscreen New Nissan windscreen seal New Nissan front doors window surrounds and seals New Nissan rear quarter windows (must replace for proper paint job) New Nissan rear window surrounds and seals New Nissan side skirts New Nissan boot badges New Nismo rear bonnet lip New Nissan guard liners Interior New Nissan lens cover over cluster New Nissan gear boot shift New Nissan gear knob New Nismo steering wheel New Nismo floor mats New Billet Handbrake lever New Nissan OEM pocket facia to replace radio Underbody Original stone guard removed and new stone guard coating applied Powder coated front and rear cross members Fuel lines painted to match factory colours Fuel tank removed, cleaned, repainted and refitted All nuts and fixings cleaned, repaired and zinc plated Wheels Rays/Volk racing TE37 18 x 10.5 + 15 in Bronze Yokahama A050 265 x 35 x 18                         
×
×
  • Create New...