Jump to content
SAU Community

Looking For Pm350 Topics

STAG250

By STAG250,
in Four Door Family & Wagoneers

 Share

Recommended Posts

jasevr4 Mentor

jasevr4

Posted
Posted

More questions!

What colours do the PM/PNM35s come in? So far I have seen wine red, light silver, black and white.

Is it possible to get one without the integrated stereo dash piece? I intend on just running a dual din head unit later so if I can avoid it I will.

Someone has mentioned that there is a difference in the AWD system between the NM and the PM. Is there someewhere I can read up on this? (have searched)

Is the beige interior in the majority of the PMs? Seems like 95% of them have a brown interior whether it is leather or not. Ugly!

Any other suggestions or things I should look for?

Hertz Donut Proficient

Hertz Donut

Posted
Posted

You may find this to be very informative for specs and colours:

http://history.nissan.co.jp/STAGEA/M35/0408/index.html

Someone else can speak for the AWD differences between the two models but I believe it's basically NM35 = hydraulic engagement of front shaft and PNM35 = electronic engagement.

M35woah Rising Star

M35woah

Posted
Posted (edited)

More questions!

What colours do the PM/PNM35s come in? So far I have seen wine red, light silver, black and white.

Is it possible to get one without the integrated stereo dash piece? I intend on just running a dual din head unit later so if I can avoid it I will.

Someone has mentioned that there is a difference in the AWD system between the NM and the PM. Is there someewhere I can read up on this? (have searched)

Is the beige interior in the majority of the PMs? Seems like 95% of them have a brown interior whether it is leather or not. Ugly!

Any other suggestions or things I should look for?

It's similar to the G35x system. I believe the system is called ATTESA ET-S http://en.wikipedia.org/wiki/ATTESA#ATTESA_E-TS as Hertz mentioned it has a different way of engaging.

The ones I mainly see have the same type of interior as PNmad's. Just plain cloth seats, black/grey. You should be able to score one without the integrated stereo, just gotta look for the ones with panasonic head units in them. correzza?

Edited by M35woah
PN-Mad Grand Master

PN-Mad

Posted
Posted

What has been said about the AWD is correct. It uses an electromagnet to actuate the transfer case, rather than high pressure fluid of the previous models. Means the pumps don't fk out, and you can pull a fuse to turn it rwd.

Interiors vary, there are one beige which is horrible, the Axis had some tan/almost orange kind of leather, the other Axis a two tone black grey leather, and then there is black cloth.

M35woah Rising Star

M35woah

Posted
Posted (edited)

What has been said about the AWD is correct. It uses an electromagnet to actuate the transfer case, rather than high pressure fluid of the previous models. Means the pumps don't fk out, and you can pull a fuse to turn it rwd.

Interiors vary, there are one beige which is horrible, the Axis had some tan/almost orange kind of leather, the other Axis a two tone black grey leather, and then there is black cloth.

Guilty!! xD, they actually half leather, suede for the pattern part and black leather with red stitching round the edges because fasts. Oh and the interiors have different options, electric and manual with/out airbags the styles differ from each other depending what option the car has (I believe this is the same for normal stagea). MANUAL FOR WINZ.

The normal Axis which has the orange/tan leather kinda grows on you when you see it in person.

Edited by M35woah
PN-Mad Grand Master

PN-Mad

Posted
Posted

I swore I'd never buy a beige interior ever again. That will include oompa lumpa skin orange leather.

Yeah, I know yours is part suede, but didn't get it across. There is also an axis with the over fenders, while yours doesn't have them.

Options just seem to be potluck in these cars.

iamhe77 Grand Master

iamhe77

Posted
Posted

I swore I'd never buy a beige interior ever again. That will include oompa lumpa skin orange leather.

Yeah, I know yours is part suede, but didn't get it across. There is also an axis with the over fenders, while yours doesn't have them.

Options just seem to be potluck in these cars.

Axis has the over fenders and orange leather interior

Axis S (which Matt has) does not have over fenders and has the nice semi-leather interior

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Trilbyte
      RB25 S2 Idles but doesn't want to rev

      By Trilbyte · Posted

      Haha yea it's a bit of a weird setup at the moment, just wanted to make sure I sorted out any headaches before dyno day. At the moment I've changed the exhaust manifold, turbo and downpipe, 460lph fuel pump and rising rate reg as well as the previously mentioned headstuds and gasket. The nistune was already mapped for the car as it was and drove around for a few months no worries. The plan is to run flex fuel hence the big pump, which I've wired direct to the battery through a relay to avoid voltage issues.
    • Kinkstaah
      RB25 S2 Idles but doesn't want to rev

      By Kinkstaah · Posted

      Um. Was the ECU the same as the one previously there? I know R33's needed R32 GTST ECU's or other tomfoolery to run Nistune. This is such a wild setup. Most people would plumb in the turbo then not drive the car (i.e tow it to a tuner). What's actually changed since it last ran?
    • Trilbyte
      RB25 S2 Idles but doesn't want to rev

      By Trilbyte · Posted

      I'm a bit stuck with this one fellas, I recently decided to undertake a turbo conversion on my GTS-4, ended up pulling the motor to replace all the seals and do an mls head gasket and arp head studs while I was at it. Everything has gone according to plan, no oil or coolant leaks, compression checked out, and decided to give it a test before I book it in for a tune As it stands right now, the turbo only has oil lines plumbed so that I don't put boost into my untuned engine, and I'm using the factory GTS-T crossover pipe with a maf and poddy as a temporary intake. The car starts with relative ease and idles amazingly, however as the title suggests it really doesn't want to rev up, runs very smooth but almost feels choked out and unresponsive to the throttle, almost like it's running lean or something? I've triple checked my vacuum lines and timing with a timing light, injectors haven't been touched as of yet to avoid flooding the engine and worked perfectly beforehand, new plugs and coilpacks, I've even unbolted the cat just to see if it spontaneously collapsed, no dice The car currently has a nistune r32 gtst ecu installed so I have no way to check for fault codes. At this point I'm a bit stumped. Is this normal behaviour for a car with a turbo bolted onto the exhaust going nowhere? I'd imagine the turbo wouldn't cause this much restriction in the exhaust without the boost going through the intake. Any ideas? If necessary I can link a video of how it responds to full throttle while in neutral.  
    • GTSBoy
      MLR's Bogan cruise ship

      By GTSBoy · Posted

      Insert tab A into slot B?
    • The Bogan
      MLR's Bogan cruise ship

      By The Bogan · Posted

      Instructions seem simple enough to understand.....
×
×
  • Create New...