Jump to content
SAU Community

Recommended Posts

Hi Guys,

I had a few posts up on here awhile back asking about Stageas and I was pretty set on getting a pnm35 Stagea but other factors got in the way of me getting one and now here I am again but actually in the position to afford one this time around.

Last time that I posted the general consensus was that Northshore Prestiegue and Nagoya were good shops to deal with, and importing one myself from Iron Chef would work out the cheapest.

Im about to put my current car on the market and once that clears I will start shopping for pnm35 Stagea.

My budget will be 20k, the cheaper the better. If anyone could shed abit of light on what to look out for and where to go that would be much appreciated.

Buy on condition, not the kms on the dash

Avoid snow cars if possible

Check normal used car stuff

Import if you want a specific set of options and can wait

Brakes, bearings, bushes, gearbox fluid colour, does it burn oil,

Smoker car or not

Etc

Thanks VQ35DE.

I am abit suspect on alot of imports having clocks wound back, im not too fazed on extras, id probably prefer the pov spec version without leather to save abit of coin but I am concerned that replacing the seats could be expensive later down the line.

Anything to look out for with the pnm35s around the 100k mark or so on? THey seem pretty robust, and theres a host of DIY info on SAU

20k? Man, you can import a PNM35 with all the bells and whistles for that.

Whilst Northshore do the best compliance (check their install of anchor points compared to everyone else), I would import via Kris @ Iron Chef again without hesitation (even though Northshore refused to comply my PNM35 *hrmph*).

100,000kms? Why look for some with such "high" mileage?

Alex pretty much answered your question though. 100,000kms is not really a number you need to worry about with PM35's unless they have not been maintained properly.

  • Like 1

I wont be buying one with 100ks, just looking for things that will go wrong in the future such as turbos with the m35 versions.

And whilst the budget is 20k i would rather buy at around the 15k mark and leave some money aside for fuel and repairs etc.

I could go the import route but I dont really want to wait that long for the car to arrive in Aus. I guess it depends on how long my is200 takes to sell, hopefully there is a quick turnaround

There is nothing wrong with buying a car with higher KMs... Hell you might even get a car cheaper because higher kms look at things like Alex said, consumables! Don't think the dealer/compliance people replaced when it came in, they won't, unless it's extremely obvious that it's worn or broken.

One thing to check is to see if the CD changer works, these things are getting old and the laser's in them are failing due to age, also alarm check if that works otherwise most people rip em out.


My PNM35 has over 140k on it and two other people on the forum have driven it and find it fine.

Definitely worth having a talk to Kristian @ Iron Chef. I got my C34 through him and it was heaps better than what I could have gotten through a dealer. It is worth the wait

It depends on the process DumpTruck.

I am about a week away from driving away in my M35. I got it through J-Spec and could not be happier with the result.
So far, it has been 10 weeks since I first paid the broker fee and started the hunting process for the right car. That took only 10 days (And seriously, haven't seen another one as good in the 8 weeks since!!). It is currently being complianced and RWC.... just waiting for the call so I know if it needs anything -else- done before it's all mine.

Expect about 12 week turnaround and be happy with anything less is my suggestion.

*This is my first ever import.

What Kazal said sounds about right. From memory my process took about 4 months from paying the broker fee to collecting my car, all depending on how strict you are in what you are after and what comes up in the auctions.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Car has been running great, I've put about 300km's of break in time on it. First thing that stands out with properly sealing rings is no more noticeable crankcase smell coming out of my catch can. This may seem insignificant, but the constant smell while driving around was infuriating. It's also nice to see my oil level remain stable. Two new issues have developed that I only noticed this weekend though. There's a very noticeable driveline vibration past 100kmh. I only noticed it now as I've been babying it under 100kmh in the backroads. This comes as no surprise as I'm running a one-piece shaft, and I paid zero attention to my driveshaft angle when I put everything back in. I also have a fair bit of voltage drop on hot starts. The starter audibly is forcing. No issues on cold start though. I must not have removed all the paint under my main block ground during assembly. I'll try and take care of both those issues this week once the kids are asleep.  I also received all the parts I was missing for my direct port setup. I will hopefully have pictures of that up soon. I'm hoping to get back on the dyno the week of June 30th as I'll be on vacation. I'm confident I should be able to make north of 500rwkw on pump gas and WMI. I'll go back again later this summer with E98, but I want to confirm my ethanol content sensor is working properly first. I've never seen it read anything but 11%. This makes sense for our 10% ethanol content pump gas here, but I would expect the occasional movement between fill ups. 
    • 75% complete. Will now need to get a new axle with 5x114.3 hubs and then figure out how to customize some mudguards for it once the wheels are on.
    • Trailer prep is underway... Lined up the wheel to get a rough indication of how it would sit Then removed all the bits (as far as possible) and gave the frame a light sand and quick lick of paint   Then added some carpet
    • okay, so I figured this out, removed needles and reinstalled after swapping the gauge face on my triple gauge for my ER34, all work and look good. I tried to do the same for the main cluster, but the main cluster gauge faces are dished, the replacement gauge face are flat, so due to the dish in the org face ,mounting backing plate (clear) and depth of the needle, the flat gauge face will not work. I notice that R34 gtr gauges are flat, appears to be different clear backing plate that aren't dished. are these available, or what have others done to install flat gauge faces?
    • Cheers mate. Seems some people get lucky others don't. It looks like the motor was detonating (to be expected if it was overboosting I suppose) as the pistons had a lot of detonation damage, and the bearings were stuffed. The bores were very scoured too, not sure if that's from the pistons or bits of ceramic turbo. By the by now. Have been trying to avoid the rabbit hole too much on the rebuild, and there's been a few hurdles along the way, but with any luck I'll have the car back soon™. Might even pop up a thread then.  
×
×
  • Create New...