Jump to content
SAU Community

Recommended Posts

Hi guys

I just planning to add a Grom unit to my 2003 V35, my car is boss with nav.

Been searching in the forum and seems that many guys has their GROM units installed, but they are all iPod version, could I please ask if anyone know that the USB version would work?

The one that I am after is this

www.gromaudio.com/store/usb_adapters/nissan_usb_ipod_adapter_direct_digital_interface.html

Thanks a lot

Link to comment
https://www.sau.com.au/forums/topic/430151-grom-audio-unit-usb-version-for-v35/
Share on other sites

Unit you want is the usb2 with the nis02-cdc cable. So it's the non sat nav one that plugs into the CD changer port on the Bose head unit

Thank you so much for ur help mate,could I pls ask are you using the USB2 unit or iPod/BT one? Do you need to do any other things after plugging the Unit to the radio? Such as reprogram the radio or so?

Cos I've contacted the GROM team in US, and they said the USB unit may not work but the iPod unit will do, they don't know for sure though :( but I want the USB playback so bad

Cheers

Edited by 9junes
  • Like 1

The usb2 unit works perfectly. As long as it is flashed with the correct grom version aka the nis02-CDC firmware. At that point the unit is plug and play. And pressing the CD button a second time will change to using the grom unit as it believes it is an external CD stacker. The usb2 unit allows the use of all accessories. I purchases the Bluetooth and aux 3.5mm cable but you can also get the iPod cable. Along with being able to use USB flash drives or connect to an android device directly.

FYI my device arrived with the incorrect firmware as much as I tried to get the correct one preloaded. It is totally reflashable at your end but I ran in to a slight issue with the unit not reflashing with cheap USB pen drives. Purchased a new sandisk cruzer drive and worked perfectly

The usb2 unit works perfectly. As long as it is flashed with the correct grom version aka the nis02-CDC firmware. At that point the unit is plug and play. And pressing the CD button a second time will change to using the grom unit as it believes it is an external CD stacker. The usb2 unit allows the use of all accessories. I purchases the Bluetooth and aux 3.5mm cable but you can also get the iPod cable. Along with being able to use USB flash drives or connect to an android device directly.

Thank you so much mate, mine unit just arrived and i will install it soon, will share the exp if anyone interested :)

  • 10 months later...

Thank you so much mate, mine unit just arrived and i will install it soon, will share the exp if anyone interested :)

Hey mate, I know your last msg was almost a year ago, but how did you go with the Grom unit? Did you have to re-install any firmware? I am planning to order one directly from US and get it delivered by mail and hoping to get it installed by Cronulla Car sound. I'm getting the GROM BT3 with the 3.5mm aux cable.

I just got my USB2-Plus unit along with a bluetooth extention and aux/usb charging cable from carputer-shop.co.uk. I installed it in my car last night but still have the dash out to play around with it some more.

I have it plugged into my cd changer port at the back of the radio using the nis02 cable and wired to constant. Playing from usb works fine and will be my main use for the unit, i'll need to sort the folders on the usb a bit better as it's a pain to try and skip down the list when you have a few artists/albums in folders using one virtual disc. I'd rather keep the first disc for random music in one directory and use the remaining five discs for artists.

Random works well and pressing skip continues to play randomly while still allowing you to press back and go back to the previous song. It will only play one virtual disc randomly whether it's set to all cd random or cd random.

I couldn't get folder/track names to work and pressing display did nothing so i tried to update the firmware to the lastest "Nissan / Infiniti 03-10 (with text)" but it wouldn't work at all after that so i had to load up the "Nissan / Infiniti 99-07 (CD, No text)" which got it going again. So i take it the cd changer grom unit on the g35 has no text? In my case mine is the 2005 model stereo. I tried to play with the config file http://www.gromaudio.com/support/usb-config.html, but no luck.

Bluetooth works well and drops the music to play a ringtone immediately. Music resumes as soon as you hang up. Streaming from your phone will work straight away and drop whatever is currently playing, no need to change modes.

I set usb android streaming to work with any app using the config setting "a= 0" from here http://www.indashpc.org/vbullettin/viewtopic.php?p=5929, so now i don't need to use their AALinQ app. It won't support steering controls or track titles after the change but it will allow you to play youtube etc through the stereo.

Still have some tweaking to do and if anyone has insight on track titles that would be great. Also, cycling the repeat button a few times triggers my google now voice calling through bluetooth yet the mic doesn't pick up my voice. Anyone lese experience this?

How do you engage the unit?

I have the cd error fo thing and I want to add the grom unit but I am worried because it is always searching for a disk that I will not be able to get into the mode

Does the grom cable hook into the back of the bose unit itself?

Plugs into a spare port in the back of the stereo. Engaging should be fine as it thinks it's an external cd stacker, you press the cd button and it will either cycle through cd/cd changer if you actually have a cd in the stereo or it will go straight to cd changer if there's no cd's inserted.

You should be able to cycle past the internal cd stacker

  • 1 month later...

guys, got my grom usb2 unit in the mail, installed it but my non Bose headunit won't recognize it at all even though the unit charges battery through to my phone.

When i hit the cd(disc) button it doesnt flick over to external cd changer as expected.

Any ideas?

Never had an issue that turning the car off and on couldn't fix. Usually just pressing the disc button 2 times quickly would reset things. Just make sure you don't leave the flash file on the USB drive once it's flashed. Otherwise it can cause issues if it keeps reflashing accidently

after the radio unit hangs in CD Changer mode (the display showing track number with minutes and seconds freezes and no controls i.e. volume, seek, next does not respond) turning the car on and off after the unit hangs on me doesnt fix the problem. Usually i leave the car over night and the next morning i will be able to access the CD Changer mode again for a couple of minutes before it hangs again....

I had heaps of problems with my unit freezing and no longer recognizing buttons properly and no matter how many times i pulled it apart it would happen again after about 20 minutes. After some emailing i got the 28 firmware file from Grom and now it functions perfectly. Not sure if the firmware is now up on the website as it seems like it's down for me but at the time only 27 was available for the Infiniti/Nissan No Text. If people want it i could upload it.

All they said for 28 was bug fixes but i had a lot more than just a few bugs. At the time i was also on holiday and had driven over 1000kms with the faulty unit so getting the fix saved me crashing into a tree out of frustration on the way back. Everything works fine for me including usb, bluetooth, hands free (a little quiet), android usb streaming.

My config has only:

a= 0 (for direct android usb streaming, no app)
g= 15 (mic gain at highest)
v= 240 (usb audio at lowest to try and fix the huge difference in volume going from usb music to phone call)

I had heaps of problems with my unit freezing and no longer recognizing buttons properly and no matter how many times i pulled it apart it would happen again after about 20 minutes. After some emailing i got the 28 firmware file from Grom and now it functions perfectly. Not sure if the firmware is now up on the website as it seems like it's down for me but at the time only 27 was available for the Infiniti/Nissan No Text. If people want it i could upload it.

All they said for 28 was bug fixes but i had a lot more than just a few bugs. At the time i was also on holiday and had driven over 1000kms with the faulty unit so getting the fix saved me crashing into a tree out of frustration on the way back. Everything works fine for me including usb, bluetooth, hands free (a little quiet), android usb streaming.

My config has only:

a= 0 (for direct android usb streaming, no app)

g= 15 (mic gain at highest)

v= 240 (usb audio at lowest to try and fix the huge difference in volume going from usb music to phone call)

Glad to hear firmware 28 resolved your issues! unfortunately it has not for me... GROM support send me the v28 file as it does not appear to be available on the website. Should I get an RMA on this unit or is it my head unit ?

I had heaps of problems with my unit freezing and no longer recognizing buttons properly and no matter how many times i pulled it apart it would happen again after about 20 minutes. After some emailing i got the 28 firmware file from Grom and now it functions perfectly. Not sure if the firmware is now up on the website as it seems like it's down for me but at the time only 27 was available for the Infiniti/Nissan No Text. If people want it i could upload it.

All they said for 28 was bug fixes but i had a lot more than just a few bugs. At the time i was also on holiday and had driven over 1000kms with the faulty unit so getting the fix saved me crashing into a tree out of frustration on the way back. Everything works fine for me including usb, bluetooth, hands free (a little quiet), android usb streaming.

My config has only:

a= 0 (for direct android usb streaming, no app)

g= 15 (mic gain at highest)

v= 240 (usb audio at lowest to try and fix the huge difference in volume going from usb music to phone call)

Hi Scuttee,

I am trying to buy the grom unit for my 2003 V35 premium coupe. Before I order one online, I wanted to ensure that I am ordering the correct one. Is this the one that you have on your V35? BT3. http://www.gromaudio.com/store/bt3_adapters/nissan_infiniti_aux-in_mp3_bluetooth_ipod_iphone_adapter_-_sat_emulation.html

Also, what is the CDC Niso2 cable? Do I need to buy that as well? By reading from the previous posts, I understand that once I receive my Grom unit, I will need to do a firmware update with version 28.

Any help will be greatly appreciated!! Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey was wondering if you ended up installing the R33 GTR speed sensor - I found one too and wanted to confirm it's a direct swap into the R34 6 speed?
    • After 23 years of owning a Skyline, finally had the latch go.  Followed this guide,  works like a dream again. Great Guide 👍
    • Hi all,   I’ve got the biggest lot of problems with my R33 GTS-T   It was a freshly rebuilt 25th anniversary RB25DET (plastic cas, neo cams) probably 6 years ago now   The engine was running so well but I fkd up badly and trusted someone I’d known for 10 years that was well known around Plazmaman for his welding and fab work. I added a lovely photo of some of his previous work. Not sure why my car was worked on by whoever did this shit     I’m normally someone who would never open myself up to something like this, I still can’t believe I did it. Trusting him literally fkd it all up for me. Everything has been a struggle, like it’s almost been 6 years that’s how much I’ve just on and off been trying to work it all out.    All I wanted was a car that danced down low, like full boost from around 3~3500rpm to redline, don’t really care what power it puts down (if it ever does) but I just wanted it to be quick to get on it.    He recommended the turbo to get, I picked Hypergear but he told me to get the front 4” with a T4 and 0.68 rear housing.    I was expecting all these beautiful welds, tidy fab work and paid for it to be ready to go to a tuner when I got it back.    I got a car back that was an absolute mess, I actually couldn’t believe it was my car anymore. I don’t think you could even call what he did welds, they’re disgusting.    So I stripped everything he touched off it and with every bolt I loosened it just got worse and worse.    I covered it and literally built and finished another car in the meantime but now it’s getting to the point where I really want my Skyline back.   Its a struggle because I paid him to do all this shit because I didn’t know how to and now I’ve had to try and figure it all out omg    Please excuse the bird shit horrible welds, I’ve got my show pony car and am so beyond dealing with this car I don’t even really care at this point.    If someone told me about what he did to my car I wouldn’t have believed them but it happened to me. It was unbelievable. He went missing, my car went missing, it came back missing parts, the straight af chassis rails bore the scars of being dragged up a trailer backwards, even the sandwich plate was bent. Everything was leaking and open to whatever fell into it, rounded off/ missing bolts, power steering oil and coolant everywhere, no gaskets, parts stolen off it, even managed to damage the sump pan.   Promised me he’d finish the car, knew what it meant to me, I paid him thousands and thousands just for him to trash it. He told me he was fully licensed and insured, come to find out he’d cancelled his ABN, so obviously no insurance. I had laid up insurance on the car and would’ve been covered but I was scared they would’ve written it off or because the business was no longer trading I’d still be liable.    He was supposed to:  New fully custom mild steam pipe exhaust manifold with turbo location moved from factory position to high forward mount. (I don’t know if it is a mild steam pipe, I’ve got a funny feeling the waste gate isn’t in a very good position and I don’t think the outlets off each cylinder are equal) 4” custom stainless steel dump with external gate (he re-plumbed it) Cut and shut OEM intake manifold with throttle reposition (I ended up doing the throttle reposition) Box in pod filter (left out) New 100cel catalytic converter (pretty sure it’s there but unsure if it’s 100cel) Front mount intercooler piping fabricated to suit (all smashed up and rusty holes where he was supposed to make it look standard where fmic piping passes through. I don’t even think my front bar is going to fit 🙄) Custom 5” intake pipe from pod to turbo (didn’t come with it so had to do something to make it work with the Z32 afm)   Engine: Full cylinder head service & machining  Brand new valves Precision upgraded spring kit Engine block honed New bearings  New piston rings  New ARP conrod bolt kit New ARP head studs Cometic head gasket VRS kit   ATR43SS2 ball bearing turbo 0.68 rear housing  Turbosmart 45mm external wastegate (got delivered to the fab bloke, I’ve got no idea what spring is in it, I’m assuming the one that came pre installed) Walbro 260 fuel pump  Nismo 740cc injectors (tested to 880) Spitfire coil packs GCG FMIC RB25DET manual 5 speed 4:11 rear diff   I’ve got an Apexi Power FC in it atm, I was hoping to just get it to operating temp to make sure everything was okay before towing to a tuner but it’s over-fuelling too much. I don’t think that’s going to happen so i think I’m going to get either a Link G4 or Haltech for it. What do you guys recommend? I can’t work out the power FC so just gonna give up on that one     It’s got an exhaust leak coming from somewhere I can’t see 🙄    The fuel pressure was steady but now it like drops from 40 to 20psi randomly (noticed this yesterday)    I’ll attach pics of the shit he put on my car and the engine bay now as it sits    I really just need some help, I need a tuner in Sydney I can trust, I’d like to be with the car while it’s being tuned if possible, I know it looks terrible but unfortunately I’ve just got to put up with it for now and fix the cosmetic stuff later   Do you guys think the manifolds are going to be okay? Or do I throw the exhaust manifold and try again?   I don’t even think these combinations are going to work tbh   I know everything I fitted was rated to be able to take at least 400kW but most rated higher    If you’ve gotten this far I really really appreciate it 🙏 I don’t mind if you trash me or the car, I made a rookie error and f**k I’ve paid for it. As you’ll see 🙄  
    • From everything I’ve heard you’ll be waiting a long time for  the parts to arrive 
    • Have you looked at the workshop manual?
×
×
  • Create New...