Jump to content
SAU Community

Recommended Posts

Purchased my r33 just under two weeks ago, all is good except recently i've noticed it's really difficult to put the car into 1st gear and reverse at times especially when the car is rolling (obviously i dont put it in reverse while rolling forward) i'm not sure if its always keen like this or if i've only just realised.

Link to comment
https://www.sau.com.au/forums/topic/430270-r33-gtst-clutchgearbox-problem/
Share on other sites

just the way they can be. as long as it goes in when stopped without any major resistance then all is fine.

def recommend to change the gearbox and diff oils for some new quality stuff as most skylines have this neglected and can really benefit from it, you'll probably get a far smoother shift and better longevity from your driveline.

#@34GeeTeeTee the pedal feels fine, engages about half way down. when i'm stationary it's easy to move into gear, it's only really when in motion that it seems to be a problem have to put a bit of force into putting it in first.

and this is a noob question but where do i check the clutch fluid level? do i have to bleed it before refilling it or anything?

#@34GeeTeeTee the pedal feels fine, engages about half way down. when i'm stationary it's easy to move into gear, it's only really when in motion that it seems to be a problem have to put a bit of force into putting it in first.

and this is a noob question but where do i check the clutch fluid level? do i have to bleed it before refilling it or anything?

In the engine bay you will see the little rezzy near the brake fluid... the brake fluid is a bright yellow cap and the clutch i think should be a black rubbery type cap! Just take it off being careful not to spill any fluid on paintwork and see what it looks like, you should actually be able to see the level without taking the cap off but i would check the condition anyway as its more than likely due for a full flush as most get neglected!

When are you trying to put it in first while in motion? Not something you need to do too often?

just getting a feel for the car really, it's the first manual i've actually owned so its kind of just a learning process for me at the moment

Fair enough! Well if you have any mates with them or know people that drive them get them to have a quick test drive and put your mind at ease!

It could be perfectly normal and you are worrying for no reason, you could have an issue.... Hard to tell from interstate lol

Let us know how you go with it and enjoy the car man!

  • 2 weeks later...

Its a manual!

how many manuals do you know that are easy to get into 1st n reverse when the car is moving?

iv owned 8 manuals and 6 you couldn't get 1st or reverse if the car was moving. Also 2 R33s, 1 you couldn't n 1 you just barely can. Its normal as long as it goes in without crunching when stationery. N yes, sometimes it can even be hard to find reverse.

Its a manual...

:)

Good grief. I have a gearbox that was so reluctant to shift when it was first installed that it wouldn't actually engage any gears at all until we drained the normal oil out and put shockproof in it. That gearbox still likes to snick and crunch a little bit going up or down into the middle gears. And that gearbox is perfectly able to be shifted into first with the car moving at quite decent forward speed.

Does no-one know how to rev match anymore?

The car wont go into reverse while rolling because there is no synchro on this gear. Its not something you should really ever be doing anyway wether your travelling in forward or reverse. If your on a hill, put it in reverse BEFORE starting to roll backwards.

as for 1st, as already quoted, It's not the easiest gear to get in, usually you have to be travelling at a lowish speed or rev match as GTSBoy said. Mine shifts into first alright at around 15-20km/h (not 100% sure what speed as its usually when pulling up to stop or slow to near stop)

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If you are keeping the current calipers you need to keep the current disc as the spacing of the caliper determines the disc diameter. Have you trial fitted the GTS brakes fit on a GTSt hub or is this forward planning? There could be differences in caliper mount spacing, backing plate and even hub shape that could cause an issue.
    • Hi there I have a r33 gts with 4 stud small brakes, I'm going to convert to 5 stud but keep the small brakes, what size rotor would I need?
    • First up, I wouldn't use PID straight up for boost control. There's also other control techniques that can be implemented. And as I said, and you keep missing the point. It's not the ONE thing, it's the wrapping it up together with everything else in the one system that starts to unravel the problem. It's why there are people who can work in a certain field as a generalist, IE a IT person, and then there are specialists. IE, an SQL database specialist. Sure the IT person can build and run a database, and it'll work, however theyll likely never be as good as a specialist.   So, as said, it's not as simple as you're thinking. And yes, there's a limit to the number of everything's in MCUs, and they run out far to freaking fast when you're designing a complex system, which means you have to make compromises. Add to that, you'll have a limited team working on it, so fixing / tweaking some features means some features are a higher priority than others. Add to that, someone might fix a problem around a certain unrelated feature, and that change due to other complexities in the system design, can now cause a new, unforseen bug in something else.   The whole thing is, as said, sometimes split systems can work as good, and if not better. Plus when there's no need to spend $4k on an all in one solution, to meet the needs of a $200 system, maybe don't just spout off things others have said / you've read. There's a lot of misinformation on the internet, including in translated service manuals, and data sheets. Going and doing, so that you know, is better than stating something you read. Stating something that has been read, is about as useful as an engineering graduate, as all they know is what they've read. And trust me, nearly every engineering graduate is useless in the real world. And add to that, if you don't know this stuff, and just have an opinion, maybe accept what people with experience are telling you as information, and don't keep reciting the exact same thing over and over in response.
    • How complicated is PID boost control? To me it really doesn't seem that difficult. I'm not disputing the core assertion (specialization can be better than general purpose solutions), I'm just saying we're 30+ years removed from the days when transistor budgets were in the thousands and we had to hem and haw about whether there's enough ECC DRAM or enough clock cycles or the interrupt handler can respond fast enough to handle another task. I really struggle to see how a Greddy Profec or an HKS EVC7 or whatever else is somehow a far superior solution to what you get in a Haltech Nexus/Elite ECU. I don't see OEMs spending time on dedicated boost control modules in any car I've ever touched. Is there value to separating out a motor controller or engine controller vs an infotainment module? Of course, those are two completely different tasks with highly divergent requirements. The reason why I cite data sheets, service manuals, etc is because as you have clearly suggested I don't know what I'm doing, can't learn how to do anything correctly, and have never actually done anything myself. So when I do offer advice to people I like to use sources that are not just based off of taking my word for it and can be independently verified by others so it's not just my misinterpretation of a primary source.
    • That's awesome, well done! Love all these older Datsun / Nissans so rare now
×
×
  • Create New...