Jump to content
SAU Community

R33 Stock Plenum Question

DarkRyda

By DarkRyda,
in General Maintenance

 Share

Recommended Posts

DarkRyda Proficient

DarkRyda

Posted
  • Author
Posted

I wouldn't stress about it. so long as the fuel regulator is hooked up no probs. Use it for your boost gauge.

Thanks for reply ill be using it for my aftermarket boost gauge if its an extra vac line. Hopefully this helps out someone else with the same issue.

DarkRyda Proficient

DarkRyda

Posted
  • Author
Posted

Sorry i thought you were wondering what it was for and wanted to know what went there originally. My mistake. Didnt realise you wanted to know what you can use it for.

No stress champ, Thanks for all the replies =), if anyone thinks it should be used for something else let me know. Going to be used as a vacuum feed for my boost gauge at this stage.

gotRICE? Veteran

gotRICE?

Posted
Posted

Hey mate. Didnt read through the whole thread so sorry if its been answered.

My R33 has that too. When i bought it, it just had a blanking rubber thing off it. Mine is a 1998 Model, and have only seen them on these so far too.

Seems like it was just some random extra nipple added for some unkown reason.

I ripped off the blank and use it for my boost gauge feed too. So your all good, nothing has been left off :)

If you look closely, you'll see it there with the hose running off to the Apexi sensor on the fusebox.

EngineBayRadiator.png

DarkRyda Proficient

DarkRyda

Posted
  • Author
Posted (edited)

Hey mate. Didnt read through the whole thread so sorry if its been answered.

My R33 has that too. When i bought it, it just had a blanking rubber thing off it. Mine is a 1998 Model, and have only seen them on these so far too.

Seems like it was just some random extra nipple added for some unkown reason.

I ripped off the blank and use it for my boost gauge feed too. So your all good, nothing has been left off :)

If you look closely, you'll see it there with the hose running off to the Apexi sensor on the fusebox.

Thank you exactly the answer i was looking for, My engine is out of a 1998 S2 GTS-T, hence why it has the same nipple. nice engine bay btw ;)

my old 1998 R33 GTS-t S2 had the same nipple, I hooked up my Apexi Power FC MAP sensor to it.

Thanks for the reply =) helped out as well i now know it can be used for different applications.

ill most likely hook it up to my boost controller. I hope this thread helps someone else with the same issue.

Thank you to everyone for replying and trying to help out.

Edited by DarkRyda

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      WTB noltec r32 front upper (camber) arms

      By GTSBoy · Posted

      I'm firmly on the "zero compliance is good compliance" for FUCAs. I'd be looking to solid metal joints even if the primary reason for having them is because they facilitate the twist in the arm. I have never been more happy with the way the front suspension behaves than I have since I got rid of the FUCA bushes. Even the thin little (short lived) poly bushes in the Whiteline adjustables have too much compliance for my liking. It probably won't be long before I have sphericals nearly everywhere, probably including both top and bottom arms in the rear, and I'll start complaining about the increased costs for dental work. But I will be enjoying the driving more, I'm sure.
    • GTSBoy
      Brake pad Compound suggestion

      By GTSBoy · Posted

      Plus, you'll get great experience in bedding in pads!
    • Matvei27
      WTB noltec r32 front upper (camber) arms

      By Matvei27 · Posted

      I have offset Nismo brackets so the fact the gktechs can pivot is less important to me. I have 170mm JIC arms with bushings - but they provide no adjustment and I'm not sure whiteline eccentric bushings will fit them (I don't want to ruin the bushings currently in them to find out). Ideally I want something with bushings + adjustment; hence why I'd like to find a pair of these. Unfortunately they aren't easy to find.
    • Murray_Calavera
      Brake pad Compound suggestion

      By Murray_Calavera · Posted

      @Vee37 How much do you really care about finding these pads again? If your pads are quiet, work well and produce minimal dust, really isn't that enough? If you are set on finding the exact pads again, I suppose I'd do something like this -  Visit your local Jax, find out what brand of pads they carry. If the Jax workshop you previously went to had the pads on the shelf, then you can almost guarantee it will be of said brand.   I'm guessing you don't have the receipt for the previous work and pads. Can you visit a Jax workshop and see if they can look up your previous job to see what pads were fitted?  Still no luck? Put your stalker hat on, find the staff that used to work at the Jax store and ask them. Talk to local workshops, try to find out where the mechanics went to. Talk to Jax workshops, maybe they relocated to another workshop. When it comes to mechanics, its a small world. You'd be surprised how easy it is to track someone down. If these ideas don't work, shit will start getting crazy very quickly.... You could find out every brand and model of pad that fits that car... and try them individually ticking each off the list if it wasn't the one you were looking for.... If you go down this path your going to want to learn how to swap pads yourself, it is very easy, takes minimal tools and space. If you have room to park the car you have room to swap the pads. Plus you have the advantage of making sure all the brake hardware goes back in so they won't squeal! 
    • MBS206
      Beers and skylines Fatz style

      By MBS206 · Posted

      You miss spelled bearings...
×
×
  • Create New...