Jump to content
SAU Community

Recommended Posts

Try Pat's Tyres in Mitchell, they seem pretty good. Next round of tyres i get i'm goin to try Forenza, on the reccomendation of another Skyline owner. I run Falken ST115s now, and they were good, but have only lasted 9 months.

If you mean Firenza then I recommend these too! Have the ST-03 on my rears for over a year and a half and have outlasted the set of Falken Ziex's on the front. Got em from Bob Jane for around 200.

Link to comment
https://www.sau.com.au/forums/topic/43030-tyres/#findComment-880510
Share on other sites

  • 3 weeks later...

For tyres talk to Johnno or Trent at Tuggeranong Tyrepower, tell them Daniel with the low Silver R32 GTR that they fitted the Toyo proxis T1-S to earlier this year sent you ; )

They are good guys and will give you a good price, much better than everywhere else I tried.

Ewen

Where do you get your suspension done? Inline steering and suspension?

Link to comment
https://www.sau.com.au/forums/topic/43030-tyres/#findComment-912764
Share on other sites

I had it done there last time.

I just need it slightly adjusted, and a wheel alignment quickly, so i've gone to Revell in tuggeranong. Then i need to get a leaking valve on my rear left tyre looked at.

But yeah, i reccomend Inline for any serious suspension work.

Link to comment
https://www.sau.com.au/forums/topic/43030-tyres/#findComment-912789
Share on other sites

ooooh, big spender :)

I'm waiting til i've run a track day on these old tyres before i replace them :D

I've got my car booked in for suspension tweaks and wheel alignment before Saturdays driving Shell.

yeah i know Ewen, they cost a bit but they are GREAT!! haven't driven too much with them on yet, but the difference is HUGE compared to the crap ones that were on there before! i'm very happy :rofl:

hope you've still got a fair bit of grip on your old tyres...Putty Rd has some serious corners!! :rofl:

Link to comment
https://www.sau.com.au/forums/topic/43030-tyres/#findComment-914068
Share on other sites

If you are talking about Firenzas I would not recommend them at all. I have always believed in you get what you pay for and the Firenzas illustrate that.

Had 4 of them on my liberty and it was great in the dry but horrid in the wet. The Falkens I was running previously were much better in the wet.

Link to comment
https://www.sau.com.au/forums/topic/43030-tyres/#findComment-914534
Share on other sites

I've been to their Phillip shop for a wheel alignment and I was not impressed. They had no idea that R33 GTST Skyline has a stock rear camber adjustment, had to crawl under the car and show them with a finger.

Their quotes for tyres were about $40 per tyre more than what I got from Yokohama at Fyshwick.

Tom

Link to comment
https://www.sau.com.au/forums/topic/43030-tyres/#findComment-914984
Share on other sites

I asked a place in Phillip to do a Quick wheel balance and after I experienced some problems following the purchase of new tyres in Sydney. The balance made no difference. Upon closer inspection I found that the hub ball locators were missing. When I called the shop to tell tell them this was the problem, their reponse was 'yeah, that'll do it'. GREAT! I'm not going back.

There are a lot of +ve comments about Hankook Ventus K104 tyres on the suspension and handling forum if anyone is interested.

Link to comment
https://www.sau.com.au/forums/topic/43030-tyres/#findComment-915453
Share on other sites

I asked a place in Phillip to do a Quick wheel balance after I experienced some problems. Strangely it made no difference. I told them not to test drive the car when they were finished. They did.

Later I found that the hub ball locators were missing. When I called the shop to tell them, their reponse was 'yeah, that'll do it'. GREAT!

I'm not going back.

There are a lot of +ve comments about Hankook Ventus K104 tyres on the suspension and handling forum if anyone is interested.

Link to comment
https://www.sau.com.au/forums/topic/43030-tyres/#findComment-915456
Share on other sites

I asked a place in Phillip to do a Quick wheel balance after I experienced some problems. Strangely it made no difference. I told them not to test drive the car when they were finished. They did.

Later I found that the hub ball locators were missing. When I called the shop to tell them, their reponse was 'yeah, that'll do it'. GREAT! Was I wrong to assume that a tyre place would pick this up when I'd also told them I'd had a balance done elsewhere and it made no difference? I hope not.

I'm not going back.

There are a lot of +ve comments about Hankook Ventus K104 tyres on the suspension and handling forum if anyone is interested.

Link to comment
https://www.sau.com.au/forums/topic/43030-tyres/#findComment-915460
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You know, that is exactly the thing that I was thinking a coupe of hours ago. I even had a plan for a meme, involving one big one, another big one, and the Old El Paso girl saying "¿por que no los dos?"
    • NoS, 2 of the big ones.
    • Oh, that's grim. Something bad has been happening there.
    • Put an endoscope down the hole and saw this. Not quite all around the bore but a good 60% at least. Chin to the chest and towards further disappointments I guess.
    • 2 does "sort of" applies, maybe......but looking at what parts would be needed for the swap to get engineered, registered, and insured, and basically that's everything under the car, the modifications the make it legal would be problematic and horrendously expensive, all for a street car that just cruises around and hits a few twisty roads on the weekends Also, from looking at the NSW rules and Regs, with all modifications that is required just to make the car safe and not twist itself to pieces, and then actually get registered for street use, may still be impossible nowadays As for 1, when you add in a fresh engine, fresh transmission, rear cradle and diff, tailshaft, suspension, brakes, cooling, and all the other fabrication required, your probably looking at up to $100k to do it right, all for a 20 year old MX5 that is over engineered and you would never be able to actually use the power it has on the street, much like your beastie, which I love, but you actually track that thing and can use all of its powers in anger, in a safe environment  Hell, the old Bogan Cruise Ship had more power than I could use on the street, and in hindsight, I went a bit silly on that thing, it didn't really need the 500hp it had for what I actually used the car for, it was fun, but basically unusable on the street if you value your licence  As for cams, yeah, I'll probably book it in for them to get installed and tuned soonish, like next month after MX5 Mania are back at work....... and yes, I've already sent a email to bin the turbo quote and quote instead to install cams and a new Fluidampr balancer that will suit the 2.5 better than the OEM 2.0 balancer that is swapped over for the 2.5 install, as the balancer needs to get pulled to time the cams it's a while your in there sort of thing I did think a bit about flex fuel for a laugh, but being na, and no where really around locally anymore to get E85, I've binned that idea, so no sweet sweet corn smells are set for the car I wish E85 was more of a standard fuel, it's better for the environment, better for tuning, plus that sweet sweet smell we all love As for fitting in the family, that's not needed, as everyone in the family already owns a car that can seat 5 humans comfortably enough, the MX5 is "my toy" As for buying a car that is already built, nah, I would rather pick and choose my parts, I enjoy the process, and in the big picture, the additional cost is well worth the enjoyment, and the occasional frustration, I get out of doing it, albeit with other people spinning the spanners, and me, just paying the invoice 🤣
×
×
  • Create New...