Jump to content
SAU Community

Recommended Posts

  • 2 months later...

I have been using the AEM wideband for 6 years now, couldn´t be happier with it. Works great, no calibration needed and all the electronics fit in the 2" gauge :)

$T2eC16Z,!ykE9s7t)2UyBR-QHE0IEw~~60_12.J

I'm running the same unit in my car, and it follows exactly with the Dyno operators setup, gives the same readings, Not sure what he has though.

I personally run a NTK AFX which I bought on recommendation from reading through American forums with input from reputable big name workshops with tons of big hp cars. I was gonna buy something different for the other car but I think I'll just buy another NTK.

  • 2 years later...

I'm going to get a 20L drum, cut the top off, and then collect all the f**ked innovate LM2 hand controllers I have encountered (Including 2 of mine) pour fuel in, BURN ALL OF THE dream boats, and then with the molten plastic and slag, get f**k YOU TO HELL INNOVATE engraved on it, and post it to them.

Innovate can eat the biggest, fattest and longest of dicks.

The units last about 1-2 years. Then they go to shit. They f**k up in a shit way - the AFR reading rubber bands between 10 and 40 AFR and is absolutely f**ked. Powersupply on the car a little shit? No problems, just be an asshole and don't work at all innovate.

The analogue outputs don't even f**king work properly. they have 2 analogue outputs - one works, 0-5v the other doesn't work at all even though they boast the unit has two. False advertising.

Their customer service is ZERO

Their response to emails - ZERO
The quality of their units - ZERO
The parts availability - ZERO

f**k them.

I'm going to buy a techedge unit and never trust innovate again.

For all my CAN BUS needs on the Link G4+, I have been using hte Ecotrons ALM-CAN and ALM-CAN II. I worked with link to get templates made up so you can just load the file and it connects. I have permanently mounted one in my car over a year ago and still going good. I have installed about 5 other units, and 2 dual units without an issue. CAN is just so f**king easy. They are all 4.9 LSU too, and now with the ADV sensor.

Edited by The Mafia

My previous M800 had a controller built in for my 4.9.

Unfortunately the G4+ plug in has none so fitted a KMS eugo CAN a little xii but wtf http://kms.vankronenburg.nl/products/accessories-2/uego-can-controller/

How much was it? Always looking for good prices. And link having support for it is a bonus.

I paid 345 euro 1 1/2 years ago from this outfit. http://www.akracing-shop.de/KMS-Einspritzanlagen/KMS-CAN-Breitbandlambda-Set.html If you hunt around you may find it cheaper.

I looked at the Chinese Ecotrons one first but have been burnt before buying from there so went with this one and no complaints.

Went CAN to avoid voltage signal offsets etc.

I've been having luck with Ecotrons.

I'm with you too - I like CAN because the voltage offsets, bad earths etc give me the shits when they don't work properly.

For sure! nice to know what you are seeing is correct.

can recommend the 14 point 7.com spartan controllers using the LSU4.9 sensor. they're 75 USD for the controller.

basic, but have a 0-5v output and are cheap with automotive grade gear. haven't had an issue with mine. haven't used the sigma 2.1 controller but has a display and multiple inputs if you're into that kinda thing.

http://www.14point7.com/products/spartan-lambda-controller-2

Edited by burn4005

DO NOT USE THE INNOVATE MTX-L.

They cook sensors, then after they cook sensors the gauge will cook itself LOL

Also there are two versions of the LM2, the older is a piece of shit because it uses the old LSU 4.2 sensor not the newer LSU 4.9 found in the latest version.

I have the old croc of shit version which somehow just shows W27 most days and some days work lol.

The main reason I use Innovate is because of their serial out, which directly integrates with Adaptronic also they're the only ones on the market with a handheld wideband which I use to tune other people's cars (not so much these days, as I just tell people to install widebands before seeing me).

However, I am game enough to try the new LM2 that uses the LSU4.9 sensor.. hopefully no more wacky readings and W27 errors (also wtf is W27? it's not even in the manual)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, the other thing I've sorted is a baseline dyno run up at Unigroup's new location. The auto trans was a little unco-operative by both shifting down when the throttle was floored on the dyno (so Mark had to ramp it up more slowly than in a manual) and also by shifting up at 6,000 even in sports mode instead of the indicated redline of 7,000 Still, on a hot day it made 240rwkw at 16psi which seems about right for 300kw (400hp) through an auto at the wheels.  The shape of the curve is not quite right because it was not full throttle to about 4,500 to stop it kicking down, but until I can get a tune on the auto trans control this was the best we could do.....full boost will be well below 5,000 once that is sorted, I'll get some data logs when I can to confirm For comparison, the R32 made 255 at 12psi (at 4,500) on the same dyno with tune, n1 turbos, cam gears, big exhaust but otherwise all standard so the v37 is likely a little better out of the box. One thing that is very clear is that the standard water to air intercoolers are not up to sustained use at full throttle in warm ambient temps. After about 5 runs (so only a few minutes full throttle), it was pulling boost and timing and dropping 10-15% power. Unfortunately I didn't get that printout and the Unigroup guys are away at the moment, will try and get hold of it on their return. So, looks like a healthy engine to start modifying and the only real area of concern is the w2a heat exchangers which the aftermarket has plenty of solutions for    
    • I maintain it actually looked really nice in person. So much so that I thought "No, this is illegal" but there it was, clear as day. I think we can easily call the wing and wheels/height to be transformative. Not saying it's better than the GR Whatever, or the 86, or the WRX STI or anything of that sort (the internet says it all bolts up so you can buy best of all worlds?) but it's still at least a thing and not nearly AS bad as people say.
    • That's less offensive than the previous gen.....except for all that ugly black tupperware around the edges. Blerck!
    • I leant out the window recently and took a picture of this new WRX. It looked real damn fine in person. It's faster around a track (stock) than a (stock) GR Yaris. It's much more practical despite being heavier. It's significantly cheaper. This gen tunes really well, much better than others. .... I think they're probably a lot better than people expect.
    • WRXs are a pure pleb boring car these days. You need to get an STI to even get close to what a WRX used to be.
×
×
  • Create New...