Jump to content
SAU Community

Recommended Posts

Parts are located in Bowral, NSW - approx. 1hr south of Liverpool.

Please contact via PM.


Pictures can be taken on request - I would take them in advance, however I'm currently battling bronchitis, so not overly keen on battling the elements!



R32 GTR diff/hubs/axles/knuckles/control arms/handbrake assembly


For those that aren't familiar, the GTR rear end is a popular upgrade for the silvias and non-GTR skylines. GTR diff is essentially a Nismo GT 2way with a softer engagement for street use, which is teamed with stronger axles and hubs.

Ratio is 4.11:1. All parts in good condition. Diff oil has been drained for transport.


This setup is from a 1992 GTR. Unfortunately for me, my 1994 GTR turned out to have an R33 GTR setup, so this spare set is useless to me.


$800



R32 GTR Factory wheels, with Bridgestone Potenza slicks


4x Factory forged 16x8 +30 stockies. Good overall condition.

225/50/r16 Potenza slicks. Used, but plenty of remaining tread. A few years old, but still get very sticky after you put some heat in them.


These don't clear my new brake setup, so they're not much use to me. Happy to trade for a set of 33GTR stockies, if anyone happens to feel that way inclined.


$800



S15 Torsen LSD


Factory JDM Spec-R S15 diff, 3.7:1 ratio, Torsen centre. Complete housing in good condition. Diff oil has been drained for transport.


$250
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
    • Nah, not really responsible for that little fiasco, but I'm still pissed at myself for writing off my 86, or when I reversed my VX into a pole just before selling it, but, meh, 5hit happens to stuff, all it takes is a slight distraction, and life is full of distractions, and "dooh" moments   
×
×
  • Create New...