Jump to content
SAU Community

Recommended Posts

Hi guys

This has probably been covered already but I am not having much luck finding it if there is.

Is there a post on recent ecu comparisons.

My build is using a RB25det

My mods planned so far

Greddy inlet manifold

High rise turbo manifold

Hta 3076 or gtx3076 turbo ( not purchased yet)

Manual box

Fmic

Bigger injectors

I guess what I am looking for is around the 400whp max and I am looking for an ecu that has a few tunes available, should be able to get me over the emissions test on one of the tunes

Adjustable Boost controll

And be MAP compatible.

I probably have missed some things as I am new to these engines.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/430858-ecu-comparison/
Share on other sites

If you go with a plug in haltech of similar, you can choose to use the map sensor or the stock afm. You would be able to set it up to run the afm for an inspection, then switch back to the map sensor..

I'd find out your requirments for inspection before you get too far ahead of yourself.

Link to comment
https://www.sau.com.au/forums/topic/430858-ecu-comparison/#findComment-6988873
Share on other sites

^ Agreed, depending on state requirements are different... Most certainly should know about the test before anything else.

Also running E85 doesn't mean you instantly are "hassle free", despite the people saying how easy the test is to pass... That's only one factor as there is nothing to stop a Police officer saying "I don't think you are running E85" and off you go to the pits anyway.

And while you are at it, more research on the set-up. 400rwhp does not mean getting a GTX3076 and running E85, far too much turbo for that power aim when you can get smaller and be more responsive for the same end.

Link to comment
https://www.sau.com.au/forums/topic/430858-ecu-comparison/#findComment-6988882
Share on other sites

Go to your tuner, Tell him what you have just typed here and then get whatever ECU he says

No point getting an ECU that your tuner doesnt want to touch

This assumes you have fixed on a tuner first. If you haven't then research the best ECU choice for your needs and then ask who is the best at tuning them. If they are a reputable shop then go for it.

Link to comment
https://www.sau.com.au/forums/topic/430858-ecu-comparison/#findComment-6988981
Share on other sites

^ Agreed, depending on state requirements are different...

And while you are at it, more research on the set-up. 400rwhp does not mean getting a GTX3076 and running E85, far too much turbo for that power aim when you can get smaller and be more responsive for the same end.

Good points there to consider there, only going by what was recommended to me with the turbo size, thank you for the advice and I will do some more research when I get back to the big smoke, if I can go a smaller turbo and pick up good response then that's great, not after huge HP just some decent HP so the car is fun to drive.

If Fitting the AFM to get past licensing then running the MAP sensor part of the ecu after is what I have to do then I will do that no big deal.

Running E85 was only an option to get past the emissions part of licensing due to the fuel burning cleaner if it was needed, once car is licensed I was going to run premium pump fuel.

Ok so I have a few mates that build Rb's and I have spoken to RIPS over in NZ because I was looking at one of their manifolds at one stage and some fellas that have drift cars.

Recommended so far

Haltech

Wolf

Power FC

Link G4

Link to comment
https://www.sau.com.au/forums/topic/430858-ecu-comparison/#findComment-6989052
Share on other sites

Definitely speak to your tuner first.

In my case, I've got a Link G4 plug-in, and my tuner has no problems tuning it. BUT, he doesn't know it as well as he does Haltech. While the Link is very comparable to the Haltech, he could do a much better job tuning a Haltech ECU, simply because he has a lot of experience with them. Not to say he doesn't do a great job tuning with the Link, but when you go to such a powerful stand-alone ECU there are a lot of ways to set things up, so with the Haltech he knows exactly what he wants to do and how he wants to set it up, but with the Link he needs to figure it out.

In the end, the two ECU's might both be great ECU's, but if going with one over the other means your tuner knows exactly how to get it to idle perfectly with the A/C on first time without you needing to bring it back for little corrections, etc...

Link to comment
https://www.sau.com.au/forums/topic/430858-ecu-comparison/#findComment-6989285
Share on other sites

I just do not understand how a tuner could tune one ecu, but not another.

Probably just CBF. Or in the case of HKS authorised tuners - because they have nearly no competition so can keep people tied to them :)

Link to comment
https://www.sau.com.au/forums/topic/430858-ecu-comparison/#findComment-6989564
Share on other sites

Hi everyone and thank you for your advice

I have just finished speaking to a fella over here in Perth who used to work for 101 garage in QLD

Looks like I will probably

Lol i assume you are on mobile and it automatically sent half way through a reply? :domokun:

Link to comment
https://www.sau.com.au/forums/topic/430858-ecu-comparison/#findComment-6989993
Share on other sites

Hi everyone and thank you for your advice

I have just finished speaking to a fella over here in Perth who used to work for 101 garage in QLD

Looks like I will probably go with the Haltech unit and the 3073 turbo on top of a 6 boost manifold.

I didn't realize that running E85 was that much of a mess around ( excuse my ignorance)

Will use the AFM to pass licensing and then run the internal MAP sensor in the ecu.

The engine exhaust noise shouldn't be too much of an issue as long as its gone properly.

Most probably won't be pulled over every day like you do in a skyline majority of 5 O wouldn't expect that from an old fj holden

Link to comment
https://www.sau.com.au/forums/topic/430858-ecu-comparison/#findComment-6989996
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I haven’t taken them out of the cases yet    inside the box is this packaging which is pretty much like a massive blister pack 
    • Purchased a NC MX5 a while ago Basic suspension mods done, BC coils and Whiteline sway bars  New DBA calipers, discs and pads Added some 17 x 8 Konig Decagrams with 215/45 17 PS5's Added some typical NA bolt on's, i.e. full exhaust and intake  Added 0.5ltrs with a MZR2.5 swap, nice bump in torques  Found a detachable hard top which is locked in for a colour match with my local paint shop in Feb 25, this also includes some PDR as it has received a few love taps from parking in the local shops when in the hands of my Minister for War and Finances, me, I park nowhere near other cars and typically park on the street The little thing is awesome, I drive it everywhere, it handles like a dream whether I'm up it or just cruising  But now,  because I'm a idiot, I keep looking at turbo kits....... did I mention I'm a idiot Why is dose so appealing  All of the NA 2.5 glory, well.......until sometime in 2025 anyway....🤪  
    • I would not be surprised if you are the only person on earth that has the interest/desire to do that lol.  The Haltech base map is a really good starting point, the car will fire easily and drive very well, even on mild boost levels. To me, following your advice sounds like some sort of ancient Chinese water torcher lol (this is not an insult Josh, never change <3)
    • Those car show concepts from the 2000's and 2010's like the Floria and IDx were brilliant and should've gone ahead, at least one of them. But neither Honda nor Nissan are thinking about affordable performance any more, which is truly sad.  Even if Toyota's liquid hydrogen ICE development reaches the point where it's commercially viable and the infrastructure to support it, Honda/Nissan would have to wait until Toyota allow fee access to their patents to offer it with any smaller performance models they released to take advantage of it.  
    • A sporty manual RWD coupe with a IL4 Honda engine would only be a good thing I assume we won't see anything released for a few years though, unless informal talks and designs have been going on for a few years,  and due to the current, and future, emmisions and safety requirements, I assume anything "sporty" they would do would be at least some hybrid thingie And hopefully anything they are thinking of has nice lines, without lots of plastic and fake bits hanging off it like that horrendous FK8 that looked like it was designed by a 13 year old The other issue of course in the current market is cost, currently the type R is around $70k, a twin is around $50k Meh, I'm old and grumpy and would rather buy a older model car and waste my coin on that than buying anything currently available new  
×
×
  • Create New...