Jump to content
SAU Community

Recommended Posts

do u need an aftermarket ecu or is the standard one ok?

700hp worth of turbo

yes, you need a tune.

whether that is simply a nistune board or a motec m880 is up to you

but now you will need bigger injectors etc or you will have a car slower than standard

well...who knows how much more/less air a GT35 is flowing at 10psi compared to the little Hitachi the car came with.

might be running hugely lean at WOT.

if you just cruise around at low load/throttle I cant see there being a problem. give it the berries and expect to be looking though the for sale section for a new RB

The compressor on the GT35 is MUCH bigger than the stocker. The turbine on the GT35 is MUCH bigger than the stocker. The wastegate actuator on the GT35 will NOT be set at the same 5-7 psi that the stocker is. So there is no way in hell that you will be able to successfully run that turbo on the standard ECU without wiring the wastegate open so you don't get any boost or being more disciplined in your right foot extension than most people are capable of.

Otherwise the advise of the above people is valid. You WILL need injectors and, assuming you keep the standard ECU and Nistune it, a Z32 AFM at minimum. You will also need a custom metal turbo intake (which should be obvious given the size difference between the stocker's inlet and the GT35's inlet).

Edited by GTSBoy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...