R32 Gtst Clutch Bracket Broke Beed Help!

[vagynamite]

Hey guys so my clutch was sqeeking and one day it finnaly snapped at the weakest point. Bassically i just need help on finding which bolts/pins to remove to take the bracket out.

Here is a picture: http://imgur.com/SSc6N5X

You can see where it broke in the top right corner

Any help is aprecciated thanks!

[GTSBoy]

Disconnect the pedal from the push rod. Undo the bolts that hold the bracket to car.

[vagynamite]

Ok cant seem to find bolts anywhere on the bracket. If you look at the picture ot looks like they are covered? Litterrally cant see any nut or bolt on the bracket anywhere

[GTSBoy]

Have you lifted the bonnet?

[vagynamite]

Yea i took a look but didnt see much. Do i have to undo from the footwell or engine bay?

[GTSBoy]

From memory, there's one nut directly above the spring, there's one stud that goes through to the engine bay and is the lower nut on the clutch master, and I think there's at least one more that you may have to remove the vent duct to see and access.

[Dan_J]

yes 2 nuts on the master and one bolt under the dash hidden by a aircon duct