Jump to content
SAU Community

Recommended Posts

Hi everyone,

Once again the shed has been cluttered by parts that I no longer need. All parts cam from either R33 GTR OR R33 GTST. All parts are quality goods which are straight and haven't been in any type of accident. The parts themselves have been replaced by new pillow ball suspension and there isn't a need for me to have the stock stuff anymore.

I'm located in Adelaide, South Australia and can post the items if need be at the cost of the buyer.

-oil cooler (push on hose type) $15

-GTR air idle regulator $15

-GTST diff centre (minus ring gear $100

-Generic 12' thermo fan $40

-GTST S1 HICAS rear steering unit $80

-GTST S1 camber arms front $10 each

-GTST callipers and rotors $200 (front and rear)

-GTR vac ballast tube $10

-GTR vacuum/water lines $10

-BLITZ blow off valve $50

-TRUST/GRACER pod filter $20

-GREEN label air flow meter S1 GTST $20

-GTR rear main crank seal $5

-GTR crank scraper plates $10

-GTR water pump (no cavitation) $10

-GTR DUMP PIPES $15 EACH

-GTST washer bottle and motors $15

-GTST rear camber arms $5 each

-GTST rear traction rods $5 each

-GTST rear LCA's $15 each

-GTR turbo oil and water lines $5 the lot

-GTST full exhaust from dump pipe $80 (mild steel)

-GTST A/C lines +condenser $30

-GTST S1 centre grille $60 (2PAk silver)

-Bosch 464 fuel pump $5

-GTR thermostats (76.5 deg) $5 each

-GTST fuel tank $30

-GTST fuel pump assembly $40

-RB25 GTST S1 gear set $300

PICS BELOW!

YOU CAN PM ME ON HERE OR MSG/CALL ME ON 0400262578 IF YOU NEED ANY MORE PICS.

CHEAPEST PRICES I HAVE SEEN ON HERE FOR STUFF LIKE THIS..

CHEERS HULI

post-61756-0-19006600-1377864302_thumb.jpgpost-61756-0-24336900-1377864327_thumb.jpgpost-61756-0-16104100-1377864352_thumb.jpgpost-61756-0-55146300-1377864368_thumb.jpgpost-61756-0-86390900-1377864388_thumb.jpgpost-61756-0-42353800-1377864408_thumb.jpgpost-61756-0-60663800-1377864452_thumb.jpgpost-61756-0-37012600-1377864489_thumb.jpgpost-61756-0-60846000-1377864517_thumb.jpgpost-61756-0-82848700-1377864557_thumb.jpgpost-61756-0-39246000-1377864584_thumb.jpgpost-61756-0-61449100-1377864604_thumb.jpgpost-61756-0-36002000-1377864627_thumb.jpgpost-61756-0-49896800-1377864653_thumb.jpgpost-61756-0-05722200-1377864678_thumb.jpgpost-61756-0-20533500-1377864699_thumb.jpgpost-61756-0-05209900-1377864732_thumb.jpgpost-61756-0-36502800-1377864768_thumb.jpgpost-61756-0-93670900-1377864791_thumb.jpgpost-61756-0-02471000-1377864826_thumb.jpgpost-61756-0-95232000-1377864851_thumb.jpgpost-61756-0-77871600-1377864879_thumb.jpgpost-61756-0-59137100-1377864908_thumb.jpgpost-61756-0-21735400-1377864934_thumb.jpgpost-61756-0-84312300-1377864951_thumb.jpgpost-61756-0-32548800-1377864992_thumb.jpgpost-61756-0-32548800-1377864992_thumb.jpgpost-61756-0-54981700-1377865021_thumb.jpgpost-61756-0-67487300-1377865118_thumb.jpgpost-61756-0-67487300-1377865118_thumb.jpgpost-61756-0-42451400-1377865158_thumb.jpgpost-61756-0-39339300-1377864145_thumb.jpgpost-61756-0-48789800-1377864232_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/431080-r33-gtr-and-r33gtst-parts-cheap/
Share on other sites

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Sorry I was being harsh there, but am I wrong? You can buy a M340i easily, and there's loads available second hand. A lot more workshops modifying them as well. How about getting parts for them? Don't get me wrong, I'd love a 400R, even a 4cyl (I looked at a few V36s before buying my shitbox BMW). Sadly Infiniti died in Aus and we're stuck with importing them as niche vehicles. Supply and demand
    • Probably straight swap for an R32 GT-R? lol
    • Yes I think we changed out the transmission fluid as I had a leak last year so we changed out the seals also. Need to check.    I should have said just change from 5th to 4th gear … down shift. There’s a grind.    I have a new clutch X clutch … but as I said all the changes in other gears are fine. 
    • Change the transmission fluid. I would try Motorcraft XT-M5-QS if you have it in your area for a reasonable price. Also, double check your clutch is fully disengaging. If you are not pushing the clutch pedal to the floor fully for every shift now is the time to start. Make sure the clutch is fully bled. The damper line requires two distinct bleed points to be purged of air or it will not disengage the clutch properly. If either hydraulic cylinders input or output are losing hydraulic pressure in their seals/leaking you can have problems like this. If you've ruled out everything else then the most likely explanation is the synchros are worn and you need to double clutch the shift or rebuild/replace the transmission. The transfer case is discontinued FYI so you may want to rebuild it while you're in there too. If the chain stretches past spec it can do a ton of damage.
    • You're selling the SS?! How much are you asking on it?
×
×
  • Create New...